ReviewsNonferrous Metals Alloys

Starrett-99206-07-09 Intenss Pro Band Saw Blade, Bimetal, Intenss Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 6-10 TPI

  • Bimetal blade is designed for cutting low alloy steel.
  • Good for cuts in solid, structural, and tubular shapes, and solid and tubular bundles.
  • Variable tooth pitch reduces noise levels and vibration.
  • Intenss tooth design with positive rake angle for high-production cutting operations.
  • Raker set helps clear chips for reduced clogging.
Check Stock

Pegas Spiral 5' Pack of 12 Size 5 Woodworking Sawblades

  • Best for softwoods and plywood. Manufactured at Grobet's factory, Scies Miniatures, in Vallorbe, Switzerland. Spiral blades provide cutting around the entire periphery of the blade due to a helical shape. This design allows work to be fed in straight moves..
  • The work does not have to be turned to make cuts, so sharp inside corners can be created. Excellent for wood, plastic, ferrous metals, nonferrous metals, bone, wax, and more. .024" diameter, end N/A, 48 teeth per inch..
  • The Charts shown are a BASE for people who wants to begin scrolling and don't know which blade to select for their project, based on the wood type to cut [1], the thickness of it [2], the pattern [3], the expected finish [4] or the hole size to drill for inside cuts [5]..
  • With the experience, the scroller will have their own preferences, which maybe different from our recommendations..
Check Stock

Hougen 11742 RotaMagic Metal Cutting Oil 10:1 mix Super Concentrated Cutting Fluid 1 Gallon

  • Use for any and all cutting operations on aluminum.
  • Ozone-friendly and completely free of 1,1,1 trichloroethane.
  • This Cutting Fluid Dissipates heat rapidly and provides closer tolerances.
  • Also highly effective on magnesium and other nonferrous metals.
Check Stock

Starrett - 99188-05-04-1/2 Intenss Pro-Die Band Saw Blade, Bimetal, Intenss Tooth, Wavy Set, Neutral Rake, 64.5\ Length, 1/2\ Width, 0.025\ Thick, 14-18 TPI

  • Bimetal blade is designed for cutting low alloy steel.
  • Good for cuts in solid, structural, and tubular shapes.
  • Variable tooth pitch reduces noise levels and vibration.
  • Intenss tooth design with neutral rake angle for general-purpose cutting.
  • Wavy set helps prevent stripping for cutting thin workpieces.
Check Stock

Handy Flux - 7 oz Jar w/Brush General Purpose Jewelry Making Metal Brazing Soldering Flux

  • Handy Flux is a very durable and powerful general purpose flux that protects your parts up to 1600°F (870°C).
  • It is an active fluoride-type flux which is appropriate for all nonferrous metals.
  • It begins to melt and dissolve oxides at 600°F (320°C).
Check Stock

Melin Tool - 56245 CCMGS-B Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 4 Flutes, 1.5000\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Use for radius and contouring part surfaces.
  • Designed to cut materials ranging from nickel base alloy, stainless, tough alloys, abrasive and nonferrous.
Check Stock

Lenox - 80775D2B93025 Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 119

  • Regular tooth design for general-purpose cutting.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Raker tooth set for general-purpose cutting applications.
  • Flexible back is suitable for contoured cuts.
Check Stock

Dremel 9909 Tungsten Carbide Cutter,Silver

  • The product is 1/8" Diameter, Tungsten Carbide Cutter.
  • Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods..
  • A high-speed cutter made of tungsten carbide, the hardest material next to diamonds..
  • Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit..
  • For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit..
Check Stock

PAGOW 1/2\ Hand Reamer, High Speed Steel H7 6 Straight Groove Reamer, Straight Flutes Hand Milling Cutter Tool

  • Premium Material: The material is low alloy steel with high hardenability and low hardenability. The reamer has the characteristics of high wear resistance, less severe cutting and less deformation..
  • Hand Reamer: Reamer for reaming holes have been drilled after processing (or reaming) on the workpiece, mainly to improve the precision of the hole, reducing its surface roughness, is finishing and semi-finishing tool for the hole..
  • Straight Flute Tool: 6 Flutes & Straight Shank. Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts..
  • Application Object: Installed in the lathe for cutting of metal tools. Straight flute hand reamers is used in ferrous metals and most nonferrous metals. Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
  • Application: Good for general purpose applications, offering combination of hardness and toughness for wear resistance. Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications..
Check Stock

Jewelry Polisher Tumbler 3.93 Inch Mini Magnetic Grinding and Polishing Machine 4 Speeds Control 2000rpm 100mm Magnetic Tumbler Jewelry Polisher Finisher Diamonds Finishing Machine

  • Time control: 4 speeds control. Designed for polishing intricate details, tiny crevices, and multiple settings, but not flat surfaces..
  • This magnetic tumbler can be used to process some rings with stones intact, such as Cubic Zirconia (CZ), Rubies, Sapphires & Diamonds. Magnetic Tumbling is an automated polishing process that nearly eliminates the need for cyanide bombing, stripping, and thrumming..
  • The jewelry polisher tumbler can be more than one person operation ,you can custom time, processing speed, easy and safe operation, even polishing process without human intervention..
  • Most finishing operations are completed in under 30 minutes, Just place your jewelry pieces, the steel pins, water, and special burnishing compound in the bowl, and press the "ON" button..
  • The machine is suitable for light metals, nonferrous metals, hard plastic precision parts, etc..
Check Stock

Viking Drill and Tool 43690 Type 260-T 135 Degree Split Point Black Heavy Duty Stub Length Drill Bit Set (13 Piece)

  • 13 pc. Set Screw Machine Length Heavy Duty 135-Degree Split Point.
  • 1/16 – 1/4 by 64ths, 135-Degree split point.
  • High speed steel provides good wear resistance, can be used in general purpose applications for ferrous and nonferrous materials.
  • Black oxide prevents chip building, galling and welding. Commonly used for low carbon, stainless and ferrous metals.
Check Stock