ReviewsNooelec Nesdr Mini

NESDR SMArTee v2 SDR - Premium RTL-SDR w/Integrated Bias Tee Aluminum Enclosure 0.5PPM TCXO SMA Input RTL2832U & R820T2-Based Software Defined Radio

  • Unmatched price & performance--redesigned PCB reduces noise by an average of a full 3dB! Includes all the same fantastic features as the rest of the....
  • Same form factor as the other devices in our NESDR SMArt series, which means no USB occlusion issues--run devices side-by-side without messy extension....
  • Always-on, 4.5V bias-tee with independent ultra-low-noise power supply and 250mA power capability allows you to power nearly any active antenna....
  • Designed and manufactured by Nooelec in North America. Impeccable quality and full 2-year warranty!.
Check Stock

RaTLSnake M6 v2 - Premium 3-Antenna Bundle for NESDR, RTL-SDR, HackRF, and Other Software Defined Radios. Magnetic Whip Antenna Set Made with Low-Loss RG58 Cable for Radios with 50 Ohm SMA Connectors

  • Heavy-duty, wide-band premium antenna bundle for RTL-SDR and other SMA radios. Long 2m (6') cable made with low-loss RG-58.
  • Includes antenna base and 3 antenna masts--helical, DVB-T2 and telescopic--for wideband reception. Specially designed for wideband software defined radios.
  • Male SMA connector on antenna cable for easy connectivity to all 50Ω SMA-input radios like our NESDR SMArt series and HackRF One.
  • Redesigned for 50Ω to maximize compatibility with commonly used radios and to reduce SWR mismatches. The base has been redesigned to improve ground plane coupling and shielding over v1..
  • Antenna base is constructed from heavy-gauge metal for resilience and longevity. Includes full 1 year warranty direct from Nooelec!.
Check Stock

SMA Adapter Connectivity Kit 8 Adapters for NESDR RTL-SDR SMA Radios w/ Case

  • A great addition to any radio or software defined radio with female SMA input, including our NESDR SMArt series and HackRF.
  • 8 male SMA adapters in total, allowing you to connect the following antenna types to your radio: N-connector, F-connector (aka 'Coax'), SO-239 (aka....
  • A convenient carrying case is included. Great for field use! Ample room to house your NESDR SMArt or NESDR Nano SDR.
  • 50 Ohm, low-loss adapters--lower loss than any RF cable adapters.
  • NOTE: RP-SMA looks similar, but is not the same! These will not work for RP-SMA. RP-SMA is generally only used for things like WiFi equipment, not....
Check Stock

Nooelec NESDR Smart XTR HF Bundle: 100kHz-1.7GHz Software Defined Radio Set for LF/HF/UHF/VHF. Includes NESDR Smart XTR RTL-SDR, Ham It Up Plus Upconverter, 3 Antennas, Balun, Adapters

  • A full, wide-band RF solution for those interested in getting started with software defined radio and with a keen interest in HF bands. Frequency range is 100kHz-1.7GHz (with a frequency gap near 1.1GHz).
  • The NESDR SMArt XTR HF Bundle utilizes a well-designed upconverter--the Ham It Up Plus--to receive HF, instead of utilizing a direct sampling hack as with most other low cost HF SDRs. This results in a vastly different HF experience--much better performance, and no loss of gain controls.
  • Included is a Ham It Up Plus upconverter, installed in a custom silver aluminum enclosure with fully build noise source circuit.
  • an NESDR SMArt XTR RTL-SDR, 3 antennas, an impedance matching balun for longwire and dipole antennas, and interconnect adapters and cables.
  • Amazon-exclusive bundle! Only available for a limited time. Due to the frequency gap this is NOT recommended for ADS-B. Instead try our NESDR SMArt HF Bundle (Amazon product code B0747PX3NZ).
Check Stock

JYETech ‘DSO Shell’ Oscilloscope DIY Kit w/Enclosure & Clip Probe by Nooelec. Low Cost Digital Storage Oscilloscope with 2.4″ TFT LCD. Model DSO150 (DSO 150); SKU 15001K

  • Includes everything you need to build your very own oscilloscope! A clip probe, plastic enclosure, and full product documentation are included..
  • DSO150 (15001K) kit is an upgrade to the popular DSO138 scope kit. Contains a 2.4″ color TFT LCD (320×240) display and optical encoder for navigation.
  • We strive to send the most current revision available. The current PCB version shipping for this listing is revision ‘E’, which has a variety of enhancements over previous versions. For more information on product changes, please visit the product page on NooElec’s or JYETech’s website.
  • Counterfeit versions of this product are available from other Amazon sellers. NooElec is an authorized distributor of JYETech products, which can be verified through their website or your device serial number. Warranty and support service through JYETech is included in your purchase.
  • 24/7 support service. We speak your language! Please contact our support team if you have any questions about your product, technical or otherwise.
Check Stock

Great Scott Gadgets Ubertooth One Antenna & Aluminum Enclosure Bundle by Nooelec

  • Everything you need to get started with 2.4GHz development, including Ubertooth One module installed into a custom shielded aluminum enclosure and a....
  • All bundle components covered under warranty for 1 year, directly through Nooelec.
  • Ubertooth One is a configurable 2.4GHz transceiver with great application software and support.
  • and with suitable transmit power and receive....
  • Standard Cortex Debug Connector (10-pin 50-mil JTAG) In-System Programming (ISP) Serial Connector.
  • Expansion connector intended for inter-Ubertooth communication or other future uses.
Check Stock

NooElec HackRF One Software Defined Radio SDR ANT500 & SMA Antenna Adapter Bundle

  • Your bundle includes a HackRF One, an ANT500 antenna, 4 SMA antenna adapters and a USB cable for powering the HackRF.
  • HackRF One is capable of half-duplex transmit and receive in the range of 1MHz to 6GHz.
  • HackRF One is compatible with a wide range of SDR software applications.
  • The included adapters will allow you to connect a wide range of antennas to your HackRF One, including F-connector, N-connector, BNC and PAL antennas.
  • Installation support and assistance available directly from NooElec.
Check Stock

NooElec Extruded Aluminum Enclosure Kit, Black, for Ham It Up Plus Barebones RF Upconverter for NESDR and RTL-SDR radios

  • Comes with all hardware required for finished assembly, including color-matched screws and rubber feet for non-slip usage.
  • Enclosure is laser-engraved with logo and labels, to ensure permanency.
  • NOTE: Ham It Up Plus Barebones circuit board is sold separately and is NOT included!.
  • Designed and manufactured by NooElec in North America. Impeccable quality and full 2-year warranty!.
Check Stock

Nooelec Oscilloscope DIY Kit (replacement for DSO138) Bundle. Includes 100MHz Scope Probe, Clip Probe & ESD-Safe Silicone Mat

  • Build your own color oscilloscope! Basic through-hole soldering skills are required (surface mount parts are pre-soldered to PCB).
  • Purchase includes full oscilloscope kit with parts, 100MHz oscilloscope probe, additional alligator clip probe, and ESD-safe mat for protecting your desk while soldering.
  • Printed instructions, troubleshooting guide and schematic are also included.
  • Contains a 2.4″ color TFT LCD (320×240) display.
  • We speak your language! Need help? Contact Nooelec for assistance!.
Check Stock

Twenty Greek Stories Designed to Accompany Hansen and Quinn's Greek: An Intensive Course (English and Greek Edition)

  • Your bundle includes a HackRF One, an ANT500 antenna, 4 SMA antenna adapters and a USB cable for powering the HackRF.
  • HackRF One is capable of half-duplex transmit and receive in the range of 1MHz to 6GHz.
  • HackRF One is compatible with a wide range of SDR software applications.
  • The included adapters will allow you to connect a wide range of antennas to your HackRF One, including F-connector, N-connector, BNC and PAL antennas.
  • Installation support and assistance available directly from NooElec.
Check Stock

Nooelec SAWbird+ NOAA - Premium Saw Filter & Cascaded Ultra-Low Noise LNA Module for NOAA Applications 137MHz Center Frequency

  • SAWbird+ NOAA is a self-contained LNA module designed for capturing beautiful weather images available from NOAA satellites (~137MHz).
  • The module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of interest.
  • SAWbird+ NOAA can be powered in 3 ways: via bias tee, through the on-board microUSB connector, or through DC barrel connector with the included USB to....
  • Though compatible with most SDRs, we recommend use in conjunction with NESDR SMArTee (available on Amazon, product ID B079C4S2BT).
  • Includes free aluminum enclosure, male SMA to male SMA adapter and USB to DC barrel connector adapter. Full 2 year warranty and support direct through....
Check Stock