ReviewsNooelec Nesdr Nano 3

NooElec NESDR Mini 2 SDR & DVB-T USB Stick RTL2832 + R820T2 with Antenna and Remote Control

  • Contains RTL2832U interface IC and the new, improved R820T2 tuner! This tuner has improved sensitivity and SNR compared to devices using the R820T.....
  • Contains all the same improvements on the 'generic' design as were made on the popular and well-tested NESDR Mini, including higher-accuracy clock,....
  • 1-year warranty direct from Nooelec! With locations in both the US & Canada, and full technical support services, your investment is a safe and wise....
  • Frequency capability is approximately 24MHz-1750MHz, with no gaps within that range. Expansion to HF, all the way down to 100kHz, is available with....
  • Free high-quality telescopic antenna, much improved over the older thin-whip style antenna. Turn on, tune in and...listen!.
Check Stock

NESDR SMArTee v2 SDR - Premium RTL-SDR w/Integrated Bias Tee Aluminum Enclosure 0.5PPM TCXO SMA Input RTL2832U & R820T2-Based Software Defined Radio

  • Unmatched price & performance--redesigned PCB reduces noise by an average of a full 3dB! Includes all the same fantastic features as the rest of the....
  • Same form factor as the other devices in our NESDR SMArt series, which means no USB occlusion issues--run devices side-by-side without messy extension....
  • Always-on, 4.5V bias-tee with independent ultra-low-noise power supply and 250mA power capability allows you to power nearly any active antenna....
  • Designed and manufactured by Nooelec in North America. Impeccable quality and full 2-year warranty!.
Check Stock

RaTLSnake M6 v2 - Premium 3-Antenna Bundle for NESDR, RTL-SDR, HackRF, and Other Software Defined Radios. Magnetic Whip Antenna Set Made with Low-Loss RG58 Cable for Radios with 50 Ohm SMA Connectors

  • Heavy-duty, wide-band premium antenna bundle for RTL-SDR and other SMA radios. Long 2m (6') cable made with low-loss RG-58.
  • Includes antenna base and 3 antenna masts--helical, DVB-T2 and telescopic--for wideband reception. Specially designed for wideband software defined radios.
  • Male SMA connector on antenna cable for easy connectivity to all 50Ω SMA-input radios like our NESDR SMArt series and HackRF One.
  • Redesigned for 50Ω to maximize compatibility with commonly used radios and to reduce SWR mismatches. The base has been redesigned to improve ground plane coupling and shielding over v1..
  • Antenna base is constructed from heavy-gauge metal for resilience and longevity. Includes full 1 year warranty direct from Nooelec!.
Check Stock

Nooelec NESDR Smart XTR HF Bundle: 100kHz-1.7GHz Software Defined Radio Set for LF/HF/UHF/VHF. Includes NESDR Smart XTR RTL-SDR, Ham It Up Plus Upconverter, 3 Antennas, Balun, Adapters

  • A full, wide-band RF solution for those interested in getting started with software defined radio and with a keen interest in HF bands. Frequency range is 100kHz-1.7GHz (with a frequency gap near 1.1GHz).
  • The NESDR SMArt XTR HF Bundle utilizes a well-designed upconverter--the Ham It Up Plus--to receive HF, instead of utilizing a direct sampling hack as with most other low cost HF SDRs. This results in a vastly different HF experience--much better performance, and no loss of gain controls.
  • Included is a Ham It Up Plus upconverter, installed in a custom silver aluminum enclosure with fully build noise source circuit.
  • an NESDR SMArt XTR RTL-SDR, 3 antennas, an impedance matching balun for longwire and dipole antennas, and interconnect adapters and cables.
  • Amazon-exclusive bundle! Only available for a limited time. Due to the frequency gap this is NOT recommended for ADS-B. Instead try our NESDR SMArt HF Bundle (Amazon product code B0747PX3NZ).
Check Stock

JYETech ‘DSO Shell’ Oscilloscope DIY Kit w/Enclosure & Clip Probe by Nooelec. Low Cost Digital Storage Oscilloscope with 2.4″ TFT LCD. Model DSO150 (DSO 150); SKU 15001K

  • Includes everything you need to build your very own oscilloscope! A clip probe, plastic enclosure, and full product documentation are included..
  • DSO150 (15001K) kit is an upgrade to the popular DSO138 scope kit. Contains a 2.4″ color TFT LCD (320×240) display and optical encoder for navigation.
  • We strive to send the most current revision available. The current PCB version shipping for this listing is revision ‘E’, which has a variety of enhancements over previous versions. For more information on product changes, please visit the product page on NooElec’s or JYETech’s website.
  • Counterfeit versions of this product are available from other Amazon sellers. NooElec is an authorized distributor of JYETech products, which can be verified through their website or your device serial number. Warranty and support service through JYETech is included in your purchase.
  • 24/7 support service. We speak your language! Please contact our support team if you have any questions about your product, technical or otherwise.
Check Stock

Nooelec SAWbird+ NOAA - Premium Saw Filter & Cascaded Ultra-Low Noise LNA Module for NOAA Applications 137MHz Center Frequency

  • SAWbird+ NOAA is a self-contained LNA module designed for capturing beautiful weather images available from NOAA satellites (~137MHz).
  • The module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of interest.
  • SAWbird+ NOAA can be powered in 3 ways: via bias tee, through the on-board microUSB connector, or through DC barrel connector with the included USB to....
  • Though compatible with most SDRs, we recommend use in conjunction with NESDR SMArTee (available on Amazon, product ID B079C4S2BT).
  • Includes free aluminum enclosure, male SMA to male SMA adapter and USB to DC barrel connector adapter. Full 2 year warranty and support direct through....
Check Stock

Autel Robotics EVO Nano Premium Bundle: 249g Ultralight Foldable Drone, 3-Axis Gimbal with 4K Camera, 48MP Photos, 3 Way Obstacle Avoidance, 28 Mins Flight, SkyPortrait,10km HD Transmission, Orange

  • 【2023 NEWEST ULTRALIGHT EVO NANO DRONE】Autel evo nano drone features powerful aerial photography capabilities packed in a compact, foldable, palm-sized frame. Even weights only 249g, the EVO Nano's 1/2" CMOS sensor 48MP camera paired with an ultra-stable 3-axis gimbal is capable of recording smooth cinematic 4K/30fps HDR video in challenging conditions. And with its 28-min flight time, 6.2 miles (10km) transmission , the EVO Nano mini drone give you the ability to fly farther and see clearer..
  • 【< 249G ULTRALIGHT & FOLDABLE AIRCRAFT】Autel nano drone weigh only 249 grams, like the DJI Mini and Mini 2, ideal for the traveler or unlicensed hobbyist operating where restrictions exist. With folded arms measures 142×94×55mm, it can be comfortably carried almost anywhere in your backpack or a dedicated case. Additional, as under 250g which may exempt it from certain regulations in many countries..
  • 【4K/30FPS VIDEO, 48MP】Autel Robotics EVO Nano aircraft is packed a 1/2-inch(0.-inch) 48-megapixel sensor with up to 16x digital zoom, captures impressive 48MP photos and records ultra-sharp 4K/30fps video, capturing crisp details that make foota....
Check Stock

For Blue Yeti Boom Arm, Mic Desk Stand Compatible with Blue Yeti Nano Microphone, Blue Yeti x Mic Arm Stand Perfect for Podcasts, Gaming, Recording.

  • [Strong Compatibility] :For blue yeti x and blue Yeti Nano mic boom arm adapter wide compatibility 3/8'' to 5/8'' and 3/8'' to 1/4'' Screw adapter are line with industry standards.This stand not only compatible with blue yeti x and blue Yeti Nano mic, but also suitable for mount most standard-sized microphones..
  • [Easy to use]:This blue yeti x and blue Yeti Nano mic Microphone boom arm is simple to set up and demount, you can easily move and carry the microphone stand.Compatible with blue yeti x and blue Yeti Nano mic,Suitable for voice-over, video recording, broadcasting, TV stations for you additional convenience..
  • [Heavy Duty Steel Structure]: Super-strong spring with extra positioning screw, compact microphone arm stand designed for blue yeti x and blue Yeti Nano Microphone carry,sturdy enough to keep mic well placed. Max load: Approx.2pound/1kg..
  • [Rugged desk mount]: In comparison to the old versions, this blue yeti x and blue Yeti Nano zinc alloy desk mount is built with anti-scratch pad and wider mouth up to 2 inch/5cm to fit most desktop to fix the base..
  • [Various accessories]: The set not includes blue yeti x and blue Yeti Nano Microphone.The set includes 1 x blue yeti mic boom arm, 1 x Desk clamp, 1 x 3/8" to 5/8"Adapter, 3 x Cable tie..
Check Stock

Makerbase MKS Robin Nano V3 32 Bit Control Board 3.5inch TS35 Touch Screen for Creality Ender 3 V2 Pro 3D Printer Mainboard Replacement Parts Marlin 2.x Klipper with 5pcs TMC2209 WiFi Module

  • WIDE RANGE OF APPLICATION: Makerbase 3d printers mainboad Robin Nano can used on Creality 3D printer ender-3, ender-3 v2, and ender-3 pro, with the color screen 3.5inch which is the great update version for FDM 3d printer for homeuse..
  • MORE POWERFUL PROCESSING CAPABILITIES: Makerbase 3d printer MKS Robin Nano V3.1 is an upgraded version of Robin Nano V2.0 and V3.0, change the MCU from the STM32F407VGT6 to STM32F407VET6. What is more, Robin Nano V3.1 improves the anti-interference performance, such as adding Schottky diodes to the temperature measurement circuit and MOS circuit, and adding TVS protection to the power input..
  • DIVERSIFICATION OF FUNCTIONS: This Creality ender 3d printer update tool kit also have the 3.5inch touch screen, which is the color display version TS35 very easy to use..
  • EXTENSIVE MATCHING WITH DISPLAY: Makerbase MKS Robin Nano V3.1 can work with TS35 touch screen display and also can work with MKS H43 LCD MINI12864 LCD2004, which can show showing RGB multi-color backlight with various color lights support knob to directly adjust settings.
  • BETTER FIRMWARE OPTIONS: The same as the Robin Nano V2.0, firmare of MKS Robin Nano V3.1 is also based on Marlin 2.X. Actually, we directly use the sae respository. Just modify the type of mo....
Check Stock

FYSETC 3D Printer Vorn 2.4 Big Dipper Motherboard New Upgrade Silent Control Board Based on Due 3 Mini 5+ WiFi with TMC2209 Stepper Motor Drivers Onboard for Vorn V2.4 V0.1 3D Printer CNC Machine

  • WIDE RANGE OF APPLICATION: Makerbase 3d printers mainboad Robin Nano can used on Creality 3D printer ender-3, ender-3 v2, and ender-3 pro, with the color screen 3.5inch which is the great update version for FDM 3d printer for homeuse..
  • MORE POWERFUL PROCESSING CAPABILITIES: Makerbase 3d printer MKS Robin Nano V3.1 is an upgraded version of Robin Nano V2.0 and V3.0, change the MCU from the STM32F407VGT6 to STM32F407VET6. What is more, Robin Nano V3.1 improves the anti-interference performance, such as adding Schottky diodes to the temperature measurement circuit and MOS circuit, and adding TVS protection to the power input..
  • DIVERSIFICATION OF FUNCTIONS: This Creality ender 3d printer update tool kit also have the 3.5inch touch screen, which is the color display version TS35 very easy to use..
  • EXTENSIVE MATCHING WITH DISPLAY: Makerbase MKS Robin Nano V3.1 can work with TS35 touch screen display and also can work with MKS H43 LCD MINI12864 LCD2004, which can show showing RGB multi-color backlight with various color lights support knob to directly adjust settings.
  • BETTER FIRMWARE OPTIONS: The same as the Robin Nano V2.0, firmare of MKS Robin Nano V3.1 is also based on Marlin 2.X. Actually, we directly use the sae respository. Just modify the type of mo....
Check Stock

iPhone 4s Cable, iPad 2 Cable, 30-Pin USB Charging and Cable Sync Dock Connector Data Cable for iPhone 4/ 4s, iPhone 3G/3G, iPad 3/2/ 1,iPod Classic iPod Touch iPod Nano-3.2Feet

  • [Our service] 30 days worry-free money back with One Year limited warranty. If you have any questions, please feel free to contact us directly.
  • [Compact] heat-resistant stainless steel connector heads slot in easily but securely and fit most cases, durable cable completely meet your needs, light-weight and not easily coiled.
  • [2 in 1 function] Pure copper wire core and PVC material, to ensure high data effective transmission, the maximum support 2.1A current output, to ensure data the charge of the rapid transmission.
  • [Certified Safe] USB 2.0 to 30-pin iPod connector for Data Synch and charging, 100% compatible with iphone 4, iphone 4s, iphone 3gs, iphone 3g, ipad, ipad 2, ipad 3, ipod touch, ipod touch 2, ipod touch 3, ipod touch 4, ipod nano, ipod nano 2, ipod nano 3, ipod nano 4, ipod nano 5, ipod nano 6, ipod classic, ipod classic 2, ipod classic 3.
  • [Reliability] Antioxidant metal plug, durable can plug pull out more than 3000 times, high charging efficiency, ultra data transmission, reduction, small power loss, improve the conversion rate of charging.
Check Stock