ReviewsNooelec Nesdr Smart Software

Nooelec NESDR Smart XTR HF Bundle: 100kHz-1.7GHz Software Defined Radio Set for LF/HF/UHF/VHF. Includes NESDR Smart XTR RTL-SDR, Ham It Up Plus Upconverter, 3 Antennas, Balun, Adapters

  • A full, wide-band RF solution for those interested in getting started with software defined radio and with a keen interest in HF bands. Frequency range is 100kHz-1.7GHz (with a frequency gap near 1.1GHz).
  • The NESDR SMArt XTR HF Bundle utilizes a well-designed upconverter--the Ham It Up Plus--to receive HF, instead of utilizing a direct sampling hack as with most other low cost HF SDRs. This results in a vastly different HF experience--much better performance, and no loss of gain controls.
  • Included is a Ham It Up Plus upconverter, installed in a custom silver aluminum enclosure with fully build noise source circuit.
  • an NESDR SMArt XTR RTL-SDR, 3 antennas, an impedance matching balun for longwire and dipole antennas, and interconnect adapters and cables.
  • Amazon-exclusive bundle! Only available for a limited time. Due to the frequency gap this is NOT recommended for ADS-B. Instead try our NESDR SMArt HF Bundle (Amazon product code B0747PX3NZ).
Check Stock

NESDR SMArTee v2 SDR - Premium RTL-SDR w/Integrated Bias Tee Aluminum Enclosure 0.5PPM TCXO SMA Input RTL2832U & R820T2-Based Software Defined Radio

  • Unmatched price & performance--redesigned PCB reduces noise by an average of a full 3dB! Includes all the same fantastic features as the rest of the....
  • Same form factor as the other devices in our NESDR SMArt series, which means no USB occlusion issues--run devices side-by-side without messy extension....
  • Always-on, 4.5V bias-tee with independent ultra-low-noise power supply and 250mA power capability allows you to power nearly any active antenna....
  • Designed and manufactured by Nooelec in North America. Impeccable quality and full 2-year warranty!.
Check Stock

NooElec NESDR Mini 2 SDR & DVB-T USB Stick RTL2832 + R820T2 with Antenna and Remote Control

  • Contains RTL2832U interface IC and the new, improved R820T2 tuner! This tuner has improved sensitivity and SNR compared to devices using the R820T.....
  • Contains all the same improvements on the 'generic' design as were made on the popular and well-tested NESDR Mini, including higher-accuracy clock,....
  • 1-year warranty direct from Nooelec! With locations in both the US & Canada, and full technical support services, your investment is a safe and wise....
  • Frequency capability is approximately 24MHz-1750MHz, with no gaps within that range. Expansion to HF, all the way down to 100kHz, is available with....
  • Free high-quality telescopic antenna, much improved over the older thin-whip style antenna. Turn on, tune in and...listen!.
Check Stock

NooElec SAWbird+ GOES - Premium Saw Filter & Cascaded Ultra-Low Noise LNA Module for NOAA GOES/LRIT/HRIT/HRPT Applications 1688MHz Center Frequency

  • SAWbird+ GOES is a self-contained LNA module designed for capturing beautiful weather images available from NOAA GOES satellites.
  • The module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of interest.
  • The amplifier can be powered in 3 ways: via bias tee, through the on-board microUSB connector, or through DC barrel connector with the included USB to....
  • Though compatible with most SDRs, we recommend use in conjunction with NESDR SMArTee XTR v2 (available on Amazon, item ID B06Y1GN5RP).
  • Includes free male SMA to male SMA adapter and USB to DC barrel connector adapter. Full 2 year warranty and support direct through Nooelec!.
Check Stock

Great Scott Gadgets Ubertooth One Antenna & Aluminum Enclosure Bundle by Nooelec

  • Everything you need to get started with 2.4GHz development, including Ubertooth One module installed into a custom shielded aluminum enclosure and a....
  • All bundle components covered under warranty for 1 year, directly through Nooelec.
  • Ubertooth One is a configurable 2.4GHz transceiver with great application software and support.
  • and with suitable transmit power and receive....
  • Standard Cortex Debug Connector (10-pin 50-mil JTAG) In-System Programming (ISP) Serial Connector.
  • Expansion connector intended for inter-Ubertooth communication or other future uses.
Check Stock

NooElec HackRF One Software Defined Radio SDR ANT500 & SMA Antenna Adapter Bundle

  • Your bundle includes a HackRF One, an ANT500 antenna, 4 SMA antenna adapters and a USB cable for powering the HackRF.
  • HackRF One is capable of half-duplex transmit and receive in the range of 1MHz to 6GHz.
  • HackRF One is compatible with a wide range of SDR software applications.
  • The included adapters will allow you to connect a wide range of antennas to your HackRF One, including F-connector, N-connector, BNC and PAL antennas.
  • Installation support and assistance available directly from NooElec.
Check Stock

Twenty Greek Stories Designed to Accompany Hansen and Quinn's Greek: An Intensive Course (English and Greek Edition)

  • Your bundle includes a HackRF One, an ANT500 antenna, 4 SMA antenna adapters and a USB cable for powering the HackRF.
  • HackRF One is capable of half-duplex transmit and receive in the range of 1MHz to 6GHz.
  • HackRF One is compatible with a wide range of SDR software applications.
  • The included adapters will allow you to connect a wide range of antennas to your HackRF One, including F-connector, N-connector, BNC and PAL antennas.
  • Installation support and assistance available directly from NooElec.
Check Stock

Ham It Up v1.3 Barebones - Nooelec RF Upconverter for Software Defined Radio. Works with Most SDRs Like HackRF & RTL-SDR (RTL2832U with E4000, FC0013 or R820T Tuners); MF/HF Converter with SMA Jacks

  • Listen to ALL HF, down to 100kHz and below, with nearly any software defined radio!Listen to ALL HF, down to 100kHz and below, with nearly any software defined radio! Massively improved performance vs. any direct sampling hacks and implementations.
  • Proudly made in the USA and Canada with high-quality components! Full 1 year warranty, direct through Nooelec.
  • Antenna protection on the RF input, in-circuit in both enable and passthrough mode.
  • Also available in a 'Plus' version, which includes a TCXO and frequency capability down to 300Hz. Product name: Ham It Up Plus Barebones, Amazon SKU: B076CYH6NL.
Check Stock

Nooelec GOES Weather Satellite Mesh Antenna - 21dBi Parabolic Antenna w/ 1.7GHz Center Frequency 200MHz+ Bandwidth LMR400 Feed Cable with Male SMA Connector Mounting Hardware & 2 Year Warranty

  • This 21dBi antenna is meant for high gain L-band applications where the antenna is stationary. The center frequency is 1.75GHz, and bandwidth is....
  • Can be deployed for both linearly and circularly polarized signals (RHCP and LHCP).
  • Software is required for the decoding of images. Current options are either free Linux-based decoders or a paid version of XRIT Decoder for Windows (a....
  • Full 2 year warranty directly through Nooelec!.
Check Stock

Nooelec HackRF Complete Bundle - Genuine HackRF One Software Defined Radio SDR with 0.5PPM TCXO in a Custom Black Aluminum Enclosure ANT500 Antenna & SMA Antenna Adapter Bundle Included

  • Your bundle includes a genuine HackRF One installed an inconspicuous black aluminum enclosure with a 0.5PPM TCXO module, an ANT500 antenna, 4 SMA....
  • HackRF One is capable of half-duplex operation in the range of 1MHz to 6000MHz. The TCXO module ensures impeccable tuning accuracy in nearly any....
  • HackRF One is an open-hardware device which is compatible with a wide range of SDR software applications, most of which are free to download and open....
  • The included adapters will allow you to connect a wide range of antennas to your HackRF One, including F-connector, N-connector, BNC and PAL antennas.
  • Installation support and assistance available directly from Nooelec. Full 2 year warranty!.
Check Stock

JYETech ‘DSO Shell’ Oscilloscope DIY Kit w/Enclosure & Clip Probe by Nooelec. Low Cost Digital Storage Oscilloscope with 2.4″ TFT LCD. Model DSO150 (DSO 150); SKU 15001K

  • Includes everything you need to build your very own oscilloscope! A clip probe, plastic enclosure, and full product documentation are included..
  • DSO150 (15001K) kit is an upgrade to the popular DSO138 scope kit. Contains a 2.4″ color TFT LCD (320×240) display and optical encoder for navigation.
  • We strive to send the most current revision available. The current PCB version shipping for this listing is revision ‘E’, which has a variety of enhancements over previous versions. For more information on product changes, please visit the product page on NooElec’s or JYETech’s website.
  • Counterfeit versions of this product are available from other Amazon sellers. NooElec is an authorized distributor of JYETech products, which can be verified through their website or your device serial number. Warranty and support service through JYETech is included in your purchase.
  • 24/7 support service. We speak your language! Please contact our support team if you have any questions about your product, technical or otherwise.
Check Stock