ReviewsNpt Adaptor

New FloodStop Multi-Purpose FS 1/2-NPT v4 (Lead Free)

Motorized Full-Port Ball Valve (1/2 inch NPT pipe threaded).
Control Unit (with Battery Backup 4 X AA Size).
One output contact (normally open) that can be connected to an Alarm, Home Automation or Auto-Dialer systems if desired.
Output Contact Wires - approx 3ft to valve and approx 7ft to sensor.

Motorized Full-Port Ball Valve (1 inch NPT pipe threaded, valve length: 4 inches).
Control Unit (uses Battery Backup 4 X AA Size not included).
One output contact (normally open) that can be connected to an Alarm, Home Automation or Auto-Dialer systems if desired.
Output Contact Wires - approx 3ft to valve and approx 7ft to sensor.

The item is used for Hardware, Fasteners & Hooks.
This product manufactured in United States.
For use with No. 819 Nipple Chuck to allow close nipple threading of all sizes of pipe smaller than 2 inches.

Heavy-duty stainless steel Universal Fill Adapter for CO2 and HPA fill stations..
Paintball UFA fill adapter On/Off, perfect for remote systems or CO2 fill stations, release air from cylinders..
This fill adaptor is for 1/8 NPT thread,most commonly seen on remotes and fill stations..

Clear And Accurate: Pool Pressure Gauge Provides Accurate Readings of Filter Pressure Pump from 0 to 100 PSI..
Product Parameters：2.5" DIAL Display, 0-300 PSI,+/-1.5% Accuracy,1/4" NPT Bottom Mount,3/4" hose adaptor.
Applications: Swimming Pools, Spas, Hot Tubs, Aquariums Residential & commercial pressure testing of water lines,Potable water systems,Industrial Pressure test Gauges..
Commitment:If You Are Not Happy With Your Purchase We Will Issue a 100% Refund - No Questions Asked!.

D.O.T Union:1/4"(4 pcs), 3/8"(4 pcs), 1/2"(4 pcs), 5/8"(2 pcs).
D.O.T Tee:1/4"(2 pcs), 3/8"(2 pcs), 1/2"(2 pcs).
Bushing: 3/8" NPT Female x 1/2" NPT Male(2 pcs).
D.O.T Male Elbow:1/4" OD x 1/8" NPT Male(2 pcs), 1/4" OD x 1/4" NPT Male(2 pcs), 3/8" OD x 3/8" NPT Male(2 pcs), 1/2" OD x 3/8" NPT Male(2 pcs).
D.O.T Sraight Male Connector: 1/4" x 1/8" NPT Male(2 pcs), 1/4" x 1/4" NPT Male(2 pcs), 3/8" x 3/8" NPT Male(2 pcs), 1/2" x 3/8" NPT Male(2 pcs).

Gravity feed Double-Action airbrush (0.3mm), with additional 0.2mm, 0.30mm & 0.5mm complete needle/nozzle headsets.
6ft braided hose with 1/8bsp swivel nut connections,1/8BSP male to 1/4NPT female adaptor, Pipette, Nozzle Spanner.
Minimum Fine Lines 1mm or less with required skill level/ Largest Spray Patter is appx.0.13ft(40mm) distance.
Precisely control the air/paint mix, all metal construction,1/4 ounce(7ml) cup capacity.
Ideal for Model Painting, Body Art, Hobby and Craft, Fine Art, Car painting, Photo Retouching, Illustrations, Textiles and T-shirt painting. Please note that the airbrush needs air compressor to get to work..

[MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
[SIZE]: 102mm*62mm (4.016" * 2.44"), thread diameter: 20mm (0.787"), interface pipe diameter: 1 / 2" NPT thread, flow diameter: 16mm (0.63").
[N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
[WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
[MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 1.2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..

[MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
[SIZE]: 102mm*62mm (4.016 '' * 2.44 ''), thread diameter: 20mm (0.787 ''), interface pipe diameter: 1 / 2 '' NPT thread, flow diameter: 16mm (0.63 '').
[N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
[WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
[MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..

[MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
[SIZE]: 74mm * 39mm (2.91 '' * 1.535 ''), thread diameter: 12mm (0.47 ''), interface pipe diameter: 1 / 4 '' NPT thread, flow diameter: 2.5mm (0.098 '').
[N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
[WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
[MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..

Cuts internal threads in pipes. Ideal for pipe fittings..
Nominal size of the tap is that of the pipe fitting being tapped.
Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP).
Includes one taper tap each of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt, and 1" - 11-1/2 npt. Made in the USA..