ReviewsNpt Fitting

HFS(R) Homebrew Beer Wort Chiller (7.5'' 2.9''/30 plate, 3/4\ x 1/2\ NPT)

  • 2.9"W x 7.5"L x 30 Plates (3.5"H) --- 1/2"NPT Wort Fitting x 3/4" NPT Water Fitting.
  • -321F to 392F Temperature Range - Max PSI 145.
  • Cools 10 gallon batches from 212F to 75F in 10 minutes.
  • Per FDA Regulation - 4-101.14 - Copper is completely safe to use in brewing equipment.
Check Stock

Stanbroil 3/8 X 36 Non-Whistle Flexible Flex Gas Line Connector Kit for NG or LP Fire Pit and Fireplace

  • Easy to installation and use, highly durable, Corrugated flexible flex gas line with feature of high temperature resistance.
  • 3/8" OD x 1/4" ID 36 inch Stainless steel pipe coated black gas line with fittings.
  • 3/8" Male Flare x 1/2" Male NPT fitting end, 3/8" Male Flare x 1/2" Female NPT Fitting. Brass 90 degree fitting for customer connection convenience.
  • CSA certified, fit for NG or LP fireplaces and .
  • There is a staggered pitch every 2" to Eliminate Whistling.
Check Stock

Stanbroil 3/8\ X 12\ Non-Whistle Flexible Flex Gas Line Connector Kit for NG or LP Fire Pit and Fireplace

  • Easy to installation and use, highly durable, Corrugated flexible flex gas line with feature of high temperature resistance.
  • 3/8" OD x 1/4" ID 12 inch Stainless steel pipe coated black gas line with fittings.
  • 3/8" Male Flare x 1/2" Male NPT fitting end, 3/8" Male Flare x 1/2" Female NPT Fitting. Brass 90 degree fitting for customer connection convenience.
  • CSA certified, fit for NG or LP fireplaces and 003c90K BTU with a 3/8" Connection Hub fire pit and fireplace burners.
  • There is a staggered pitch every 2" to Eliminate Whistling.
Check Stock

Sewer Jetter Kit for Pressure Washer,Sewer Jetter Nozzles Kit,100 FT Drain Cleaning Hose for Pressure Washer,Button Nose and Rotating Sewer Jetting Nozzle,1/4 Inch NPT,Orifice 4.0,4.5,4000-5800 PSI

  • ...e, which can resist oil, weather, ozone and abrasion. It is ISO 9001 Certified. Pin test each crimp to check proper internal crimp..
  • ❤【Button Nose and Rotating Nozzle】Button Nose 4.0 Orifice.1 front jet at 0°that clears blockages.3 rear jets at 33° flush out debris loosened by the front jet.1/4″ Female Fitting – Fits 1/4″ NPT male sewer jet hose fittings.Rotating Sewer Jetter Nozzle 3 backward rotating spray blasts into clogged pipe and moves the nozzle through pipe. The nozzle is easy to slide into drain pipes and sewer lines.The orifice is 4.5.Fits sewer jet hose with 1/4″ male end. 1/4″ Female NPT Fitting..
  • ❤【Quick Connect Plug and Female Metric M22 to 1/4 Inch Female NPT Fitting】Quick Connect Plug used in a lot of situations where high pressure connections are frequently assembled or disassembled.Ideal for quick exchange of pressure washer outlet, sewer jetter hose, guns and nozzles.It makes a solid connection with quick coupler each time.Pressure washer coupler convert metric M22 14mm female NPT thread to 1/4″ Female NPT..
  • ❤【After Sale Guarantee】100% money back guarantee – For whatever reason, you are not satisfied, you can request a replacement or a full refund. Customer satisfacti....
Check Stock

2 Pack Brass Hose Fitting Adapter 3/8 Barb x 1/4 NPT Male Pipe

  • Standard 1/4 npt to 3/8 barb for connecting a hose to a male threaded connection of a different diameter..
  • Brass material make it strongest construction for prolonged service life,Easy to use and reliable..
  • Hose barb on one end and male NPT threads on the other, no leaking and durable, easy to connect and disconnect..
  • Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads..
  • Package include 2 Pack 3/8" Hose ID x 1/4" NPT Male Pipe brass fittings..
Check Stock

BathAce Brass Reducer Hex Bushing Threaded Pipe Fitting Heavy Duty Threaded Pipe Fitting Adapter 3/8 Male NPT x 1/4 Female NPT 5

  • MATERIAL: Made from Premium solid brass, durable, thicker and rustproof. It is perfectly suitable for hose systems as it can withstand long periods of....
  • FUNCTION: Standard 3/8" Male NPT to 1/4" Female NPT. The brass fitting is an adapter for connecting pipes with different diameter..
  • TEMPERATURE: Operating temperatures range of -65°F to 250°F ( -53°C to 121°C)..
  • WIDELY APPLICATION: This pipe fitting can apply to plumbing connections, natural gas, refrigeration and hydraulics, etc. Easy tightening and....
  • BRAND ADVANTAGE: BathAce is a professional brass pipe fitting manufacturer, aim to produce stronger performance product..
Check Stock

Air Outlet Kit for 3\\/4 Inch Tubing System with 1\\/2 Inch NPT Outlet Port (Base Kit)

  • Material: 6061 anodized Aluminum for the manifold.
  • Brass material with Nickel plating for fitting and drain valve.
  • Working Pressure: 200 psi maximum working pressure.
  • Thread Size: 1/2 NPT threads at on the front, top and bottom of the manifold( 3 ports).
  • Kit includes: Aluminum manifold, Drain ball valve, 1/2 inch NPT straight fitting and PTFE Tape.
  • Installation: Easy installation and the tubing also can be removed if needed.
Check Stock

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

  • ...Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • 13 GALLON TANK MEASUREMENTS 21” x 9” x 16”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Class A Customs | RV Fresh and Gray Water Tank | Combo Pack (20 Gallon & 25 Gallon) | RV Water Holding Tanks

  • NSF Certified MATERIALS used for manufacturing process — ALL PARTS of tank made with NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin with UV-8 stabilization — The tank and fittings are both made out of this material..
  • These 20 and 25 gallon tanks each have two 1/2″ female NPT fittings (fitting will be closed, to use remove inner membrane with razor knife) and two 1 1/2″ female NPT fittings (fitting is not closed, this fitting is completely open).
  • 20 Gallon Tank measurements – 32 1/2″ x 11 3/4″ x 11 3/4″ (+/-.25″).
  • 25 Gallon Tank measurements – 33 1/2″ x 17″ x 10″ (+/- .25″).
  • Combo Pack of RV Fresh & Gray Water Tanks, 20 Gallon & 25 Gallon.
Check Stock

Outdoor Water Solutions ARS0026 7-Inch Airstone Diffuser

  • This is a 7" diffuser airstone with a 1/2" male npt fitting that fits our airstone foot valve which is also called an inline backflow valve.
  • Note: shallow or larger ponds may require multiple airstone diffuser kits..
  • Note: this air stone require an airstone foot valve to prevent water from backing up into the airline..
Check Stock

Class A Customs | T-7500 | 75 Gallon Fresh Water Holding Tank

  • 75 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 50.5” Longest Length (not including fittings) x 17.5” x 19.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the US....
Check Stock