ReviewsNpt Thread

SINTLY 3/8\ NPT to 6AN Flare Male AN6 Straight Fitting Union Flare Adapter Aluminum Black 2Pcs

【Tips】To obtain a proper seal in the NPT joint, you need to use a sealant compound or PTFE tape. The thread is sealed by wedging. The NPT connection cannot be reused. When accessories are reused, this can cause wear or increase the possibility of leakage..
【37 Degree Flare Fitting Taper】：The 6an male flare to 3/8" NPT fitting has one male side AN is a 37-degree flare fitting taper and the other male side NPT is a 60 degree tapered threads. These adapter hose fittings are designed to quickly make professional 37° AN connections from NPT tapered pipe threads. Designed for smooth flow that gives better fluid flow, tight security, and leaks free.
【Application】-6AN to 3/8" NPT straight flare to pipe adapter is widely used in kinds of liquids, oil, Water, Air, Fuel lines, E85, gas, etc. Bulkhead Fitting is perfect to apply in automotive, industrial, boat/marine, etc. The male flare fitting fit all oil cooler / fuel tank / fuel pump/fluid Line/turbo..
【Material ＆ Features】Made of High-Performance Lightweight 6061-T6 Billet Aluminum Material. All threads are designed for the maximum percentage of engagement. One side is AN standard and the other is NPT National Pipe Taper Thread. Each straight fitting is completed with a black anodized fini....

Check Stock

GESHATEN 1/2” G Thread (BSP) Female to 1/2” NPT Male Connector, Brass BSP to NPT Adapter 1/2 Inch, Industrial Metal Brass G Thread to Pipe Fittings Connect (2 Pack)

Type: 1/2 inch G Thread (Metric BSP) female to 1/2 inch NPT (National Pipe Thread) male..
Durable: Solid brass construction, durable and rustproof, more reliable than aluminum or plastic materials..
No Leakage: Rubber washer included to eliminate leak. Heavy duty brass ensures no leaks due to deformation..
Package Includes: 2 PCS * 1/2" G Female to 1/2” NPT Male Connector..
Please note that G Thread (BSP) and NPT are different types of threads. To meet your requirements, please confirm the adapter you need before placing an order..

Check Stock

Holley 300-137 LS1/LS2/LS6 Single Plane Intake Manifold

Carb Mounting Flange Height from Lifter Valley Cover Flange: 4.95".

Check Stock

WarmGuard WG15 Insulated Drum Band Heater - Barrel Heater, Fixed Internal Thermostat Max Temp 145 F,Tan

PACKING INCLUDE:6 Pcs Combo Set Poly plugs for poly drums with BUTTRESS (Coarse threads) the other with 2" NPT (Fine Threads). 6Pcs 3/4" Knock Out NPT threads on both plugs. Includes White EPDM gaskets（12Pcs).
FOR TIGHT HEAD OR CLOSED TOP DRUMS: Coarse thread fits (2.48") 63mm American Buttress thread plugs while the fine thread fits 2.48" (63mm) NPS thread plug.
WILL FIT MOST POLY DRUMS: The coarse buttress thread caps with included gasket will fit most 15, 30 and 55-gallon poly drums and barrels.
DRUM ACCESSORY: These bung caps are for plugging the threaded bunghole at the top of poly drums and barrels.
WE GURARNTEE:For Any Reason You're Not Completely Satisfied, You Can Ask for A Replacement Or Full Refund.Just Use It with Confidence!.

Check Stock

Brass Bushing 1 Male x 3/4 Female Threaded Brass Reducer Bushing Lead-Free Pipe Fittings 1inch x 0.75 inch

ENHANCED QUALITY BRASS Makes 1inch NPT Male x 3/4inches NPT Female Resistant to Corrosion and Safe for High Temperatures.
CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our 1" NPT Male x 3/4" NPT Female have 3/4" NPT....
RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
UNIVERSAL – our 1in NPT Male x 0,75in NPT Female can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices,....
DURABLE –Our 1‘ NPT Male x 3/4‘ NPT Female don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings..

Check Stock

Rheem SP12574 Temperature and Pressure Relief Valve,Small

For best results, use only Rheem replacement parts for repairing your Rheem Water Heater.
Maximum Temperature Setting (Deg. F): 210, Maximum Pressure Setting (psi): 150, CSA Capacity (BTU/HR): 105,000, Inlet Thread Size - NPT (in.): 3/4.
Outlet Thread Size - NPT (in.): 3/4, Overall Length (in.): 7-1/4, Body Length (in.): 3-1/4, Sensor Length (in.): 4.

Check Stock

Brass Pipe Fitting Brass Bushing 1 Male x 3/4 Female Hex Bushing Reducer Threaded Brass Reducer Bushing Pipe Fittings 1inch x 0.75 inch

ENHANCED QUALITY BRASS Makes 1inch NPT Male x 3/4inches NPT Female Resistant to Corrosion and Safe for High Temperatures.
CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our 1" NPT Male x 3/4" NPT Female have 3/4" NPT....
RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
UNIVERSAL – our 1in NPT Male x 0,75in NPT Female can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices,....
DURABLE –Our 1‘ NPT Male x 3/4‘ NPT Female don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings..

Check Stock

Carvedexquisitely Bulkhead Water Tank Fitting,1/2" NPT Female Thread,304 Stainless Steel Thru-bulk Fitting

Size:1/2" NPT female threaded,the actual diameter of 1/2" thread is 0.84 inch,NPT thread size is not the actual diameter, it is only nominal pipe size..
Bulkhead fitting are made of stainless steel, which is corrosion-resistant, rust-proof and has a long service life..
Note:The lock nut is Left-hand thread,and the external thread is used for the lock nut and cannot be connected to the pipe..
Wide range of uses: commonly used in water tanks, water towers, water inlets and outlets, self-made water storage buckets, rain buckets, and can also be used in various pipes, hoses, pipe fittings or faucets..
Bulkhead OD 25mm, suitable for about 25mm ID hole..

Check Stock

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

...sion systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
【ALL IN ONE SET】: Unique DOT Air Brake fittings Kit: The air brake fittings contain 34 pcs. 10 PCS: Male Connector 3/8" tube (NPT Pipe Thread: 2 pcs 1/2", 2 pcs 3/8" ), Male Connector 1/2" tube (NPT Pipe Thread: 2 pcs 1/2" , 2 pcs 3/8", 2 pcs 1/4"). 10 PCS: Male 90° Elbow connector 3/8" tube (NPT Pipe Thread: 2 pcs 1/2", 2 pcs 3/8" ), Male Connector 1/2" tube (NPT Pipe Thread: 2 pcs 1/2" , 2 pcs 3/8", 2 pcs 1/4&....

Check Stock

Thread Reducer Bushing 2" Male x 1-1/2" Female Adapter Pipe Fitting with Stainless Steel 304 NPT

Maximum working pressure of 150 psi at 70 degrees F.
NPT thread for creating tighter seals than straight threads.
Shape:Reducer Bushing(Male x Female),Connection:NPT-NPT,Measurement:2"x1-1/2".
This adapter fitting connects pipes or fittings with different end types, diameters, or materials.
It has male NPT threads on one end and female NPT threads on the other for connecting to a female and a male threaded pipe or fitting..

Check Stock

Drill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\

Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.

Check Stock