ReviewsNpt To 10an

TurboWerx Ultra High-Performance Turbo Oil Electric Scavenge Pump 12V

  • 350F (175C) Fluid Temperature, 2-3GPM Scavenge Pump Rate depending on oil temperature/viscosity, 50+ PSI continuous as Pressure Pump , Hardened Bronze Gear Pump Rotors.
  • 10,000 Hour Rated Dual Hybrid Ball Bearings, 10,000 Hour Rated Over-sized Brushes.
  • Highest Rated Temperature (class H or higher) Insulated Copper Motor Windings, Set of two 3/8” NPT -> AN Nickel-plated Adapters Included - Options are -6AN, -8AN, or -10AN Sizes - if size preference not specified at order time, -8AN supplied..
  • Warrant void if 350F (175C) rated temperature is exceeded, For 100% compatibility with 16-18V set-ups on race vehicles, choose the 24V Exa-Pump.
Check Stock

Olive Puller Not Damage The Pipe Olive Remover Ferrule Puller Corrosion-Resistant Copper Pipe Fittings Suitable for Brass Pipes with Diameters of NPT 1/2 Inch & NPT 3/4 Inches Ferrule Removal Tool

  • 【Warm tips】The outer packaging state of the olive puller is NPT 1/2 Inch and NPT 3/4 Inches, and the inner packaging state is 15mm+22mm. Due to a mistake in our warehouse,the size label in the inner package was wrongly attached. In fact, the pullers shipped by Amazon do indeed work on brass pipes with diameters of NPT 1/2 Inch & NPT 3/4 Inches.Please refer to the actual use..
  • 【Olive Puller That Will Not Damage The Pipe】This DUOYI olive puller is an ideal tool for taking out olives.Without damaging the pipe,puller utilises the compression fitting locking nut to remove the olives which used or damaged from the copper piping..
  • 【Suitable For Brass Pipes With Diameters Of NPT 1/2 Inch & NPT 3/4 Inches】The olive puller can work on air-conditioning pipes,and is suitable for brass pipes with diameters of NPT 1/2 Inch & NPT 3/4 Inches..
  • 【Abrasion-Resistant & Corrosion-Resistant Solid Brass】The DUOYI ferrule puller is made of high-quality solid brass,which not only has high strength and high hardness,but also has good wear and corrosion resistance. In addition,the olive puller has a smooth surface High,with high-grade texture,and long service life,can provide you with long-term service..
  • 【Easy To Use】Olive puller is easy to operate,and you can ....
Check Stock

HFS(R) Homebrew Beer Wort Chiller (7.5'' 2.9''/30 plate, 3/4\ x 1/2\ NPT)

  • 2.9"W x 7.5"L x 30 Plates (3.5"H) --- 1/2"NPT Wort Fitting x 3/4" NPT Water Fitting.
  • -321F to 392F Temperature Range - Max PSI 145.
  • Cools 10 gallon batches from 212F to 75F in 10 minutes.
  • Per FDA Regulation - 4-101.14 - Copper is completely safe to use in brewing equipment.
Check Stock

GlowShift 10 Color Digital Dual Temperature & Pressure Gauge Kit - for Boost, Oil Pressure, Water & Transmission Temp - Includes Electronic Sensors - 2 Multi-Color LED Displays - Tinted Lens - 52mm

  • GlowShift 10 Color Digital Series Dual Temperature & Pressure Gauge Allows You to Monitor 2 Vital Engine Statistics from 1 Unit - Keep an Eye on Water, Transmission, Oil or Differential Temperatures, as well as Boost, Oil or Fuel Pressure.
  • Temperature Readings from 68° to 302° Fahrenheit - Pressure Readings from 0 to 145 PSI - Set Each Display to its Own Color - 2-1/16" (52mm) Gauge with 2 Digital Displays & Tinted Lens.
  • Quick-Glance & Easy to Read Digital Display - 10 Solid Color Modes & 2 Color Cycle Modes - Self-Calibration at Startup Ensures that the Gauge is Performing Optimally.
  • Includes 1/8-27 NPT Temperature Sensor, 1/8-27 NPT Pressure Sensor, (2) 9' Sensor Harnesses, 2' Power Harness, Gauge Visor, Mounting Hardware & Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

NANPU 1/2\ NPT Compressed Air Filter Regulator Lubricator (FRL), 5 Micron Brass Element, 0-150 psi Gauge, Manual Drain, Metal Bracket

  • 1/2" NPT Air Regulator w/Gauge - Precise Pressure Regulation.
  • Piston Type Pressure Regulating Screw - More Durable and Longer Life, Prevent Air Leakage..
  • Two-Way Installation: Air can be Input from the Left or Right, the Position of the Pressure Gauge and the Bracket can be Exchanged..
  • Operating Pressure: 0-10 Bar (0-145 psi).
  • Flow Rate: 97 SCFM @ 90 psi (2750 L /Minute @ 6 Bar).
  • Temperature Range: 41-140°F（5-60℃)..
  • Includes 0-150 psi Gauge & Metal Bracket, a pair of 1/2" NPT Brass Air Coupler＆ Plug Kit, 2 x 1/2" NPT Fittings, 1 x Thread Seal Tape..
Check Stock

RIDGID 44923 Model 690-I Hand-Held Power Drive Kit, Pipe Threading Machine and 1/2-Inch to 2-Inch 11-R NPT Pipe Threading Die Heads with Carrying Case for Threading Pipe

  • UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • Metric dies 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • BUILT TO LAST: Constructed from hardened alloy steel for maximum strength and longevity.
  • Can cut materials such as cast iron, steel, aluminum, copper.
  • EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes coarse and fine threads numbered taps and dies from #4-40 to #12-24 and fractional taps and dies from 1/4"-28 to 1/2"-20, 1/8"-27 NPT tap and die, metric tap and dies from M3x0.5 to M12x1.75, thread gauge, tap handle, die handle, small tap chuck, and a carrying case for your convenience.
Check Stock

Mophorn Air Hydraulic Pump 10000 PSI 1/2 Gal Reservoir Hydraulic Foot Pump Air Treadle Foot Actuated for Auto Body Frame Machines and Pulling Post

  • Fundamental Parameters: The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 98 Cubic Inches / 1.6 Liters(1600 cc), Max Input Air Pressure: 120 psi / 8 bar, Fuel Tank Capacity: 1.6L ± 0.1L, Maximum Oil Output: 1.3L, Oil Output Pressure: 75mpa..
  • Foot-Actuated Design: The air hydraulic pump adopts a user-friendly foot-actuated design to provide hands-free operation for pumping and releasing the load, saving the operator's time and effort with strong power and high output pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
  • Sturdy & Compact Construction: This air hydraulic foot pump features an aviation aluminum pump core and a high-quality metal shell to handle tough industrial applications. 1.6L oil tank has a larger capacity with 98 cubic inches / 1.6 liters output oil. Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
  • Durable Oil Pipe Included: This hydraulic air pump is equipped with a 1 m /3 ft high-pressure oil pipe that f....
Check Stock

NANPU 1/4\ NPT Compressed Air Filter, Zinc Alloy, 5 Micron Brass Element, Quick Release Bowl, Manual Drain, for Air Compressor ＆ Pneumatic Tools

  • 1/4" NPT Air Particulate Filter - Cleans ＆ Dry Air.
  • Zinc Alloy Body- Higher Hardness and More Compression Resistance than Aluminum Alloy and Plastic Materials..
  • Piston Type Pressure Regulating Screw - More Durable and Longer Life, Prevent Air Leakage.
  • 5 Micron Brass Filter Element - Excellent Filtering Performance, Much Longer Life and Reuse Feasibility..
  • Operating Pressure: 0-10 Bar (0-145 psi).
  • Flow Rate: 68 SCFM @ 90 psi (1925 L /Minute @ 6 Bar).
  • Temperature Range: 41-140°F（5-60℃)..
  • Includes Manual Drain & Polycarbonate Bowl with Zinc Alloy Guard, a pair of 1/4" NPT Brass Air Coupler＆ Plug Kit, 2 x 1/4" NPT Fittings, 1 x Thread Seal Tape..
Check Stock

NANPU 1/2\ NPT Compressed Air Filter, Zinc Alloy, 5 Micron Brass Element, Quick Release Bowl, Manual Drain, for Air Compressor ＆ Pneumatic Tools

  • 1/2" NPT Air Particulate Filter - Cleans ＆ Dry Air.
  • Zinc Alloy Body - Higher Hardness and More Compression Resistance than Aluminum Alloy and Plastic Materials..
  • Piston Type Pressure Regulating Screw - More Durable and Longer Life, Prevent Air Leakage.
  • 5 Micron Brass Filter Element - Excellent Filtering Performance, Much Longer Life and Reuse Feasibility..
  • Operating Pressure: 0-10 Bar (0-145 psi).
  • Flow Rate: 105 SCFM @ 90 psi (3000 L /Minute @ 6 Bar).
  • Temperature Range: 41-140°F（5-60℃)..
  • Includes Manual Drain & Polycarbonate Bowl with Zinc Alloy Guard, a pair of 3/8" NPT Brass Air Coupler＆ Plug Kit, 2 x 1/2" NPT Fittings, 1 x Thread Seal Tape..
Check Stock

PneumaticPlus SAU400A-N04G - Dual Air System 1/2 NPT - Compressed Air Filter Pressure Regulator & Lubricator w/Additional Free Air Port 3/8 NPT - Manual Drain Poly Bowl

  • Max. Supply Pressure: 250 PSI, Max Operating Pressure: 150 PSI.
  • Particulate Air Filter (10 Micron Element Stanard), Pressure Regulator, Lubricator.
  • Manual Drain & Poly Bowl, Includes 0-150 PSI Pressure Gauge, Pre-installed 10 micron filter element, The gray foam on the bottom of the filter bowl is packing material. Remove Before Use..
  • Dual Air System, Dry Air & Lubricate Air.
  • Inlet Port Size: 1/2" NPT/ Dry Outlet: 3/8" NPT/ Lubricate Outlet: 1/2" NPT.
Check Stock

Metric 10x1 (f) to 1/8\ NPT (m) adapter

  • Brass adapter threaded M 10x1 (f) to 1/8" NPT (m).
  • Certain Milwaukee 18v grease guns ship with a hose that has a metric 10x1 working end. If you try to replace the coupler and the new coupler does not fit, you need this adapter.
  • NOT ALL MILWAUKEE GUNS ARE AFFECTED. Unfortunately Milwaukee has not said which batches ship with metric hoses and which ship with NPT ends, as they are supposed to. You will need to check the threads or attempt to replace the coupler to know which hose you have..
  • Does not include LockNLube Grease Coupler or grease gun hose..
Check Stock