ReviewsNtc Temperature Sensor

GOQOTOMO Smart Temperature Controller Thermostat Heating and Cooling Mode for Homebrew Fermenter Greenhouse Terrarium 100-240VAC NTC Sensor Improved Version

[Smart Display] Everything clearly displayed in one color screen, including measured temperature, heating/cooling temperature, high/low temperature alarm and compressor delay..
[User Friendly] It is the easiest temperature controller on the market that you are able to operate without user manual. Setup and display is intuitive..
[Detachable Probe] The probe is easy detachable from Type-C port. Probe replaceable once it breakdown..
[Dual Output] Two independently controlled relays allow to control refrigeration and heating equipment at the same time..
[Reliable Accuracy Reading] Enhanced NTC sensor offer accuracy measuring and reading..

Check Stock

FR Limoss Compatible MC-140 Replacement Electric Recliner Lift Chair Power Supply with Battery Back up

Safety: NTC-temperature-sensor, primary fuse, overload protection.
Intermittent mode with 10% duty cycle with max. continuous use of 2 min..

Check Stock

KETOTEK Digital Thermostat Plug Outlet Timer Day Night Temperatue Controller Outlet Thermostat 120V for Reptile Terrarium Greenhouse Heating/Cooling Control 110v

【Relay output, easy to use】 Plug-and-play design, 3 modes available to be chosen from: M1 temperature control mode, M2 temperature control with timer mode and M3 timer mode. Power supply: 100~250V AC 50/60Hz.
Output: Max 15A/120V. Temperature control range:-40℃~120℃/-40℉~248℉..
【M2 mode-Day/night temperature control function】 This temperature controller outlet plug can be set different temperatures with its function of dual time cycle setting during 24 hours according to the day and night. For example, during 8:00~18:00, control the temperature between 23℃~25℃.
during 18:00~8:00 the next morning, control temperature between 17℃~19℃, then cycle every day..
【M1 mode-Temperature control function without timer】 If you only need to control temperature simply regardless of time period, you can choose M1 mode: temperature control mode. Set start temperature and stop temperature, it will control the heater or cooler to work as programmed. (start temperature 003e stop temperature, cooling.
start temperature 003c stop temperature, heating)..
【M3 mode-Timer function with 2 time period during 24 hours】 This day/night temperature controller plug has timer function with dual time cycle setting during 24 hours. For example, set Time 1 O....

Check Stock

24V 40W 620 Ceramic Cartridge Heater with 3950 100K NTC Thermistor with 1 Meter Wiring for RepRap 3D Printer Heatbed Hot End

1 Meter long wire with high temperature PTFE insulated wiring and female pin head, 1.25mmx2.0mm glass bead.
Temperature sensor 100KΩ accuracy of ± 1%.
24V 40W 620 Ceramic Cartridge Heater and NTC Thermistor 100K 3950 for 3D Printer Creality CR-10S Pro, CR-X,Ender 3,Ender 3 Pro, Ender 3 V2,Prusa....

Check Stock

3PCS HT-NTC100K Thermistor Sensor for Creality Ender 3 v2 Upgrade 3x15mm 3950 Compatible with E 3D V6 Volcano PT100 Ender-3-5 Pro CR10 3D Printer

【Ender 3 Thermistor, Upgrade HT-NTC100K Thermistor】Cartridge temperature sensor. Metal head diameter: 3mm, head length: 15mm,cable wire length: 1 meter,connector: XH2.54 2PIN, （Suitable for heating blocks with holes of 3mm*15mm-3mm*20mm）.
【Widly Compatibility】Product recommended operating temperature -50 °C ~ +280 °C, can replace the cartridge K-type thermocouple temperature sensor. Suitable to print multi kinds of filament.Compatible with the heatblocks with 3mm hole,such as: V6 Volcano PT100 type heated block,CR10 plated copper high temperature heating block,etc.
【High Stability and Accuracy 】Encapsulated in copper case,copper material has better thermal conductivity than stainless steel and improves accuracy.Secured with high temperature adhesive,high stability, no falling off.The internal temperature package to ensure the maximum service life with precision temperature measurement..
【Long Service Life】Compared with other products of the same type that are insulated with ordinary heat shrinkable tubes, this product uses glass fiber with a temperature resistance of 400C degrees for insulation to avoid the possibility of thermal short circuit during high temperature work. Thereby increasing the service life..

Check Stock

Testo 104 - Waterproof Folding Food Thermometer (Part Number 0563 0104)

Features: Ideal for applications in the food sector | Two purposes: Infrared and penetration thermometer | High-quality including robust folding joint for tough working use | 2-point laser with 10:1 optics shows the exact measurement area..
Temperature - NTC Range: -50°C to +250°C, Accuracy: ±1.0°C for (-50°C to -30.1°C), ±0.5°C for (-30°C to +99.9°C), ±1 % of mv for (+100°C to +250°C), Resolution: 0.1°C, Reaction time: t99 = 10 s | Operating Temperature: -20°C to +60°C.
Display lighting: illuminated | Housing: ABS / TPE / PC, diecast zinc, stainless steel.
Protection class: IP65 | Diameter probe shaft tip: 2.3 mm.
Futher features: Auto hold, hold, min./max. |.
Diameter probe shaft: 3 mm | HACCP-compliant | Battery type: 2 AAA micro batteries.
Accessories: Testo 104 food thermometer with folding temperature sensor, user guide, calibration protocol, adhesive color strips, batteries. | Applications: Food transport trucks, refrigerators, Food Industries, hotels & restaurants, etc..

Check Stock

Adafruit 10K Precision Epoxy Thermistor [ADA372]

NTC thermistors are ethoxyline resin-enveloped thermistors in small size. Used for temperature measurement..
10K Ohm thermistors are very useful in many applications, and they are light for use..
NTC (Negative Temperature Coefficient) thermistors, their resistance drops as temperature increases..
Have them in a circuit built to accommodate them, they will work very well and consistently..
Widely used for air condition equipments, heating apparatus, electric thermometers, liquid level sensors, etc..

Check Stock

Ametherm Ntc Thermistor - SL22 5R012

NTC thermistors are ethoxyline resin-enveloped thermistors in small size. Used for temperature measurement..
10K Ohm thermistors are very useful in many applications, and they are light for use..
NTC (Negative Temperature Coefficient) thermistors, their resistance drops as temperature increases..
Have them in a circuit built to accommodate them, they will work very well and consistently..
Widely used for air condition equipments, heating apparatus, electric thermometers, liquid level sensors, etc..

Check Stock

KT99 Temperature Controller 120V 10A Digital Thermostat Regulator Switch Dual 1.5m Waterproof Probe for Heater Cooler Fahrenheit Display Aquarium

【Two direct output】KT99 digital thermostat support two independent direct output, with 2pcs 1.5m NTC waterproof sensor can work with two independent equipment, with °F display..
【Easy operation】KT99 Temperature controller control the load by setting the start and stop temperature. -58~248°F wide control range is good for both heater cooler..
【Compressor delay time, alarm setting】 KT99 thermostat regulator can set the compressor delay time(0~5min) to make the cooler delay start. By setting high/low temperature alarm value to keep the home appliance, incubator, seeding pads, refrigerator ,reptiles, Aquarium, and other appliances safe..
【Data storage and reset function.】 All parameters setting can be saved after short circuit and power off, and it also can be reset as requirement..
【Temperature calibration】±1°F Control Accuracy with (-30~30°F) Temperature Calibration, can make the all process more accurate, keep the temperature in desired range..

Check Stock

DZS Elec Temperature Controller -50 to 110 Celsius (-58 to 230 F) DC 12V Programmable Heating/Cooling Thermostat Control Switch Module NTC Waterproof Sensor Probe Dual Color LED Display Monitor

Temperature controller monitoring instrument, show the measured temperature (red) and set temperature (blue) at the same time. Can be used for cooling/heating control. Operating Voltage: DC12V 200mA.
Measurement Range: -50 to 110 Celsius (-58 to 230 F), the C/F button allows you to switch between Celsius and Fahrenheit temperatures.
Clear Working State: the relay is closed when the light is on, and the relay is disconnected when the light is off. It has high temperature protection..
With a waterproof NTC (10K 0.5%) temperature sensor probe, rogrammable heating/cooling mode, delay start, high temperature alarm, Celsius/Fahrenheit mode, etc..
Can be used for fish tank water temperature control, incubation field, equipment cabinet, air conditioning system, temperature control protection, control cabinet cooling system and other DIY temperature control systems..

Check Stock

5-PCS Ender 3 Thermistor HT-NTC100K 3D Printer ntc 3950 100K Thermistor Sensor for Creality Ender 3 v2 Thermistor Upgrade Compatible with E3D V6 Volcano PT100 Ender-3-5 Pro CR10 hotend,

（Ender 3 Thermistor, Upgrade HT-NTC100K Thermistor (1 meter each)）：Cartridge temperature sensor. Metal head diameter: 3mm, head length: 15mm,cable wire length: 1 meter,connector: XH2.54 2PIN, （Suitable for heating blocks with holes of 3mm*15mm-3mm*20mm）.
Compatibility：Product recommended operating temperature -50 °C ~ +280 °C, can replace the cartridge K-type thermocouple temperature sensor. Suitable to print multi kinds of filament.Compatible with the heatblocks with 3mm hole,such as: V6 Volcano PT100 type heated block,CR10 plated copper high temperature heating block,etc.
Stability and Accuracy：Encapsulated in copper case,copper material has better thermal conductivity than stainless steel and improves accuracy.Secured with high temperature adhesive,high stability, no falling off.The internal temperature package to ensure the maximum service life with precision temperature measurement..
Long Service Life：Compared with other products of the same type that are insulated with ordinary heat shrinkable tubes, this product uses glass fiber with a temperature resistance of 400C degrees for insulation to avoid the possibility of thermal short circuit during high temperature work. Thereby increasing the service life..

Check Stock