ReviewsNtc Thermister

4pcs Temperature Controller Module with Case W1209 12V DC Micro Digital Thermostat -50-110°C Electronic Temperature Temp Control Module Switch with Waterproof NTC Probe

  • ...W1209 led display digital thermostat module embedded CPU chip (MCU), is more intelligent, lower power consumption.
  • Automatic power set memory, MCU built-in EEPROM memory unit..
  • 【Temperature Controller Parameter】Temperature range: -50-110°C.
  • Control precision: 0.1 celsius.Input power (DC): 12V.
  • Output: 1 channel relay output, capacity: 10A.
  • 【Waterproof NTC Probe】The NTC probe is waterproof and can control the temperature, allowing to control heating or cooling.(The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin, which can protect the inside to prevent scratches.
  • And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.).
  • 【Package Includes】4pcs W1209 12V DC digital temperature controller board with case.(Ps: The product is not assembled, if you need assembly instructions or if you encounter any problems during use, you can contact us at any time. Thank you for your support.).
Check Stock

EnviroCare Replacement Vacuum Cleaner Dust Bags made to fit Filtex Central Vacuum 12 gallon 4 pack

  • Fits: AIRVAC or FILTEX Central Vacuum Cleaners.
  • Fits these models and more: S300L B300L S300BL TS300L TSP300L TSP300LR TS300LR TSP300 TC600L NTS300 NTS300A FX400 FX500A FX500 NTM285 NTC600 NTC600A FX775 FX725 FX900 FX2000 FX3000 ZX5800 ZX6000 FX3000 FX6000 FX4000 ZX7000 FX5000 ZX8000 FX8000 FX5800 FX7000.
  • Dimensions: 12 Gallon Capacity. 13 1/2 inch Diameter Top Opening, 23-24 inches deep..
  • EnviroCare Premium after market Part #12G.
Check Stock

UCONTRO Switchable -22 to 572 °F -30 to 300 °C Digital Temperature Controller Electronic Thermostat w/Alarmer & Probe for BBQ Grill Smoker Oven Stove Beer Brewing 110VAC

  • Comes with a NTC 100K Cylindrical Temperature Sensor Probe (Not including BBQ Meat Probe).
  • -30 to 300 °C (or -22~572 °F) temperature measurement and control.
  • Display resolution of 0.1 degrees, 1 degree control resolution.
  • Delay start function, 0-30 minutes adjustable.
  • Temperature measurement error: ± 1 Celsius.
Check Stock

Upgrade M3 Hex Screw in Fixing Thermistor 100K 3950 Temperature Sensor for Ender 3 V2 Pro CR10 and Other 3D Printer Extruder Hotend 100K 3950

  • M3 screw for installation is Quik and Durable, Flexible and Long Lasting, longer life span.
  • DIY players can also modify BLOCK by themselves. Make an M3 threaded hole in BLCOK, then you can use this thermistor.
  • Thermistor model: NTC 100K 3950. HERE is the firmware setting: *13:100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " &"Hotend "All In ONE"....
  • For the printer which uses NTC 100K 3950 thermistor, Then this thermistor is plug and use.
Check Stock

NEU MASTER NBS1850 Premium Quality Standard T50 Staples and 18GA Brad Nails for N6013/NTC0060/NTC0070 1508-Count

  • ⏹ [Universal Fit ] --- Designed for use in NEU MASTER N6013, NTC0060, NTC0070 electric staple gun kit. Also suitable for the most electric/manual....
  • ⏹ [What You Get ] --- 1508-count heavy duty fasteners in 4 different sizes. Includes: T50 1/2" staple*336pcs, T50 3/8" staple*336pcs, T50 5/16”....
  • ⏹ [High Quality] --- Kit features premium zinc-plated steel brad nails & staples provides durability and resist-rust. Ultimate tensile strength....
  • ⏹ [Sharp Chisel Point] --- Designed with sharp chisel points that fewer jams and buckles. Perfect performance means easily penetrate and precision....
  • ⏹ [Wide Application] --- These Fastener can be used in various applications around home & DIY projects, including upholstery, crafting, carpeting,....
Check Stock

XINGYHENG STC-1000 DC 110V-220V 10A Microcomputer Digital Display Temperature Controller Thermostat Control Switch 2 Relay Output Cooling Heating  and NTC 10K Thermistor Sensors Temperature Probe

  • Super material: STC-1000 intelligent thermostat is an independent product, ABS flame retardant shell, a variety of fields perfect use, convenient....
  • Package including: 1 Pack of STC-1000 intelligent thermosta module, which is equipped with 1pcs NTC 10K temperature probe. The NTC probe is....
  • STC-1000 Digital Thermostat specification: Temperature control range: -50-99°C. Control accuracy of 0.1 degrees Celsius. Control temperature by....
  • High Power High Efficiency: Two Work Mode: Heating ( start temperature is less than stop temperature), Cooling ( start temperature is above than stop....
  • A wide range of applications: temperature controller is equipped with over 40’’ inch waterproof probe can be used in moisture and water....
Check Stock

KOKISO NTC Thermistor Resistors 10 Values 81 PCS Inrush Current Limiter Temperature Sensors Assorted Kit Assortment 3D-25,5D-7,5D-9,5D-11,5D-15,8D-9,10D-9,10D-11,20D-9,47D-15

  • The NTC thermistors Value: 3D-25,5D-7,5D-9,5D-11,5D-15,8D-9,10D-9,10D-11,20D-9,47D-15.
  • Characteristic: Small size and large power，large B value with wide range of operating temperature..
  • Easy to Sort: Each model has a small bag and a mark. Box also has a marked model for easy identification..
  • Easy to store: Provide a high-quality box for easy management and storage..
  • More values: Provide 10 commonly used NTC Thermistor Resistors values to help you more convenient for controlling the inrush current of motor, heaters, bulb voltage stabilizer, electronic energy-saving lamp, etc..
Check Stock

BIGTREETECH 3D Printer Part 2 in 1 Out Hotend Multi Color Dual Bowden Extruder Full Kit with Silicone Sock for Titan MK8 Bulldog Extruders (24V Black Color)

  • Select high-quality Aluminum alloy 6063 material,and use refined sandblasting oxidation treatment of product shell to improve the surface texture.
  • The heat dissipation efficiency is increased to 40% compared with the existing similar products which can effectively reduce and avoid the occurrence of the throat plug.
  • The weight of the Nozzle is at least 20-30% lighter than that of the same type Of the products and the printing accuracy and printing quality can be effectively improved.
  • The new design can ensure that the size change of the total height of the products is less than 0.5-1.0mm, which is beneficial to mass production.
  • Hotend is compatible with both HT-NTC100K and NTC100K thermistor.
Check Stock

LASFIT 7440 LED Bulb 7440NA WY21W Error Free Anti Hyper Flash Amber Automotive Turn Signal Light Built-in Load Resistor Plug & Play (Pack of 2)

  • ...ly 300% brighter than halogen bulb, Amber(signal light) / Yelloe (Daytime running/parking light), good choice if you are seeking for an ideal LED bulb to upgrade the stock bulbs, ensure safety driving..
  • ✦Preeminent Safety Performance✦The 7440 bulb have a unique physical design as well as a temperature controlled thermister circuit named ITCS to protect the bulbs from overheating, keep the bulb cool on your long journeys.
  • ✦Easy Installation✦Simple plug and play led for front turn signal. Fit Size: 7440 7440A 7440AL 7440NA 7440LL 7441 W21W WY21W, No need to do any motification.
  • Notice: These 7440 led turn signal bulb are polarity sensitive. If the LED does not light up after inserting, simply remove it, flip the direction and reinstall..
  • ✦Drive Safely and Waranty✦Built-in MINI fuses to protect the bulbs and your cars against the instantaneous high current. Safer installation and use.
  • 1-year hassle free warranty, friendly customer service, and U.S. local customer support. Warranty does NOT cover labor, diagnostics, towing, rental car, or any other expense related to an item being defective/damaged..
Check Stock

FYSETC Prus i3 MK3 Upgrade Hotend Parts HT-NTC100K Thermistor Sensor High Temperature +250 Degrees 2 Pins for 3D Printer MK3 Extruder Heater Block 3Pcs

  • Upgrade HT-NTC100K Thermistor: package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the....
  • The temperature measurement: -50 °C ~ +250 °C for a long lifecycle, sometimes can reach up to +300℃ for a short time using, can replace the....
  • The Customized Terminal Connector( XH2.54 2P with buckle) is specially for MK3/MK3S prus einsy boards, so please check before ordering. If for Prus....
  • HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line....
  • Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement..
Check Stock

WINSINN HT-NTC100K Thermistor Sensor Ender 3 v2 Upgrade 3x15 3950 XH2.54 2Pin Compatible with Ender 3 5 Pro CR6 CR10 Series 3D Printer Hotend Pack of 5Pcs

  • ✔️Upgrade HT-NTC100K Thermistor: package temperature measurement. Head diameter: 3mm, Head length: 15mm.
  • ✔️The temperature measurement: -50 °C ~ +350 °C, can replace the original K-type thermocouple temperature. Fit for printing high-temperature....
  • ✔️Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement..
  • ✔️HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line....
  • ✔️Made by WINSINN. Can be used with the New Sensor Heater Block (Temperature measurement can be up to 350 degrees)..
Check Stock