ReviewsNumerical Hydraulic Die Forging

uxcell PHSB6 Rod End Bearing 3/8-inch Bore Pre-Lubricated Bearing 3/8-24 Female Thread Right Hand

  • Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

Mophorn Hydraulic Hose Crimper Hydra-Krimp 71500,Manual AC Hose Crimper Kit Air Conditioning Repaire Handheld,Hydraulic Hose Crimping Tool with 7 Die Set for Barbed and Beaded Hose Fittings

  • Durable Crimping Tool: Our crimper is made of aluminum alloy material, ensuring its durability. Stamper hardness can reach up to 53 HRC to bear a....
  • Integral Hydraulic: This hand-held integral hydraulic press A/C hose crimper is made for easy use. The hydraulic tool is designed with exquisite....
  • Instant Setup: Our hydraulic crimper can be installed according to the following steps: First, select the correct die to insert, insert the pin, then....
  • Lightweight & Compact: One-person operation saves your time and energy. Besides, the crimping tool kit is stored in a plastic toolbox, reducing the....
  • Wide Application: The crimping tool has a base that can be mounted to a bench for easy use, or the base can be held by any vise. It is compatible with....
Check Stock

SWAG Off Road 50\ Press Brake DIY Builder Kit With Adjustable Back Stop.

  • Press Brake Kit comes Unassembled, you do the final assembly and welding..
  • Constructed out of high strength 3/8" steel with a 1.0" x 4.0" thick top die and 3.0" wide bottom die..
  • This universal press brake kit will bend steel up to 49" wide..
  • Designed to fit in hydraulic presses that are at least 52" wide, but can easily be cut down..
Check Stock

uxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Right Hand 2pcs

  • Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Left Hand 2pcs

  • Type: 3/8" Bore x 3/8-24 left-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell POSB4 Rod End Bearings 1/4-inch Bore Pre-Lubricated Bearings 1/4-28 Male Thread Right Hand 2pcs

  • Type: 1/4" Bore x 1/4-28 right-hand male thread rod end. Maximum angular misalignment: 13 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 6.6KN Static Load Capacity, 4.5KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

ATO 7.5 hp 5.5kW VFD, 110V Input 220V Output, 23A , Single Phase to 1phase/3phase Variable Frequency Drive, for Motor Speed Control

  • Extra-low motor noise offers excellent quietness..
  • Suit for 3-Phase Nema 17, 23 and 34 Stepper Motor..
  • Output Current: 1.0 ~ 8.0A, Supply Voltage: 18 ~ 50VDC..
  • Application areas: engraving machine, filature, wire-stripping machine, marking machine, cutting machine, die bonder, plotter, numerical control machine, automatic assembly equipment etc..
Check Stock

Jenway (Bibby Scientific US) 8307045 Cole-Parmer Instrument Company 10x10 mm Cell Test-Tube Holder, 6320D

  • Accepts all SPEX Sample Prep Evacuable Pellet Die Sets.
  • Can be operated anywhere in the world, even under the most primitive conditions.
  • Economical alternative to motorized presses for labs with a small sample load.
  • Hardened steel buffer plate is engraved with concentric circles and enables easy centering of the die.
  • Manual, hydraulic laboratory press with buffer plate.
Check Stock

Mophorn Hydraulic Flaring Tool Kit with Tube Cutter Flare Tool Kit Deburrer Fuel Line 8PCS Swage Adapter Flaring Tool Kit for 3/16 to 7/8 Inch

  • Expanding & Flaring Functions: This hydraulic flare tool features 2-in-1 tube expanding and flaring functions with eight expanding dies(3/16″, 1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″) and one flaring cone for 5-22 mm tubes. It is compatible with a single expanding die only, but it can satisfy your needs easily and efficiently..
  • Manual Hydraulic Mechanism: This flaring tool set achieves the pipe expanding and flaring with a hydraulic mechanism. The hydraulic tool is designed with exquisite details, such as non-slip PVC handles and no-leakage oil cylinder, to serve you well. You can easily operate this tool with no fatigue..
  • Pipe Cutting & Deburring: This flaring tool comes with one pipe cutter and one deburring tool, both of which are easy to use with the handwheel design. The pipe cutter cuts the pipes quickly with a solid and sharp blade. The deburring tool is used for cleaning the interior and exterior of tubing..
  • Durability & Portability: The flaring tool is made of durable hardened steel, which is reliable and built to last, saving your money. Besides, the flaring tool kit is stored in a plastic toolbox that is not easily broken, reducing the possibility of missing parts. It is compact and easy to carry..
Check Stock

Greenlee 7211BB-1/2 Slug-Buster Knockout Punch Unit, 7/8-Inch

  • Unique punch profile also splits slugs for easier slug removal.
  • Use with battery-powered, hydraulic, ratchet or manual drivers.
  • Can be used on mild steel up to 10 gauge.
  • Punch unit sets include punch, die, and draw stud.
Check Stock

Titan 11980 5-Ton Hydraulic Cable Crimper

  • Set includes (9) hardened steel die sets: AWG# 10, 8, 6, 4, 2, 1, 1/0, 2/0.
  • Powder-coated steel construction | Vinyl-dipped grips for non-slip use.
  • Technical specs: Range: Copper: 4-70 mm² (AWG# 11-2/0) and AIuminum: 9-50 mm² (AWG# 8-1/0) | Force: 45KN (10,116Lbf) | Type: Hexagon | Stroke: 12mm (1/2-Inch) | Standard Setting: 4, 6, 8, 10, 16, 25, 35, 50, 70 mm² (AWG# 12, 10, 8, 6, 4, 2, 1, 1/0, 2/0).
Check Stock