ReviewsNumerical Plasma Power

Biltek Plasma Cutter 50A Dual Voltage 110V/220V Cutting Torch Kit, 1/2 Inch, IGBT Technology, Portable Plasma Cutter Machine, Metal Cutter for Steel, Copper, Aluminum, Brass, Other Metals + 250V Plug

  • [DEEP CUTTING CAPACITY & FAST SPEED CUT] Our Re-Engineered High-Performance Plasma Cutter is So Robust, It Can Cut Up To 1/2" Inch Of Thick Steel ! Optimal Cut: 8mm Thick Steel, Max Rated Clean Cut Thickness Cut: 12mm Thick Steel (at 35A 110V 60 PSI), Maximum Severance Cut: 14mm Thick Steel (at 50A 220V 70 PSI) With Cutting Speeds Exceeding 100 Inches Per Minute Our Plasma Cutting Machine Is Extremely Fast.
  • Making It The Most Efficient Way To Cut Metal At Home Or For DIY Hobby Projects..
  • [CUTS LARGE VARIETY OF METALS] Our Plasma Cutter Uses High-Velocity Ionized Gas To Create a Flame Making it Capable of Cutting Any Electrically Conductive Metal Like: Mild Steel, Stainless Steel, Carbon Steel, Expanded Steel, Aluminum, Copper, Brass and Other Ferrous (Iron-Containing) And Non-Ferrous Materials. A Must-Have Home Improvement Machine! Not Only Can You Cut Metal, You Can Also Bevel, Gouge, Mark, And Even Weld! No Other Tool In Your Metalworking Arsenal Is So Flexible..
  • [AUTOMATIC DUAL VOLTAGE- 110/220V [50/60 Hz] The Plasma Cutting Equipment Comes With A Pre-Attached 110V Plug That Can Be Switched With a 220V Plug (Included) for Even More Cutting Power! Connect....
Check Stock

SPELAB 2.5 Inch Stainless Steel Exhaust Pipe Kit

  • ★ AIR PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • ★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz)..
  • ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website..
  • ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are "LCS22" or "LCS33". Please search "Lotos LCS22" or "Lotos LCS33".
Check Stock

Rado True Square Swiss Automatic Watch with Ceramic Strap 21 Model R27083202 Silver

  • Swiss Automatic Watch Movement, with 80 hours Power Reserve.
  • Square Dial Shape 38 mm with Open Heart and Blue Details made of Plasma and High-Tech Ceramic.
  • Sapphire Crystal Case with anti reflective coating.
  • Gray Bracelet Made of Plasma High-Tech Ceramic and Titanium.
  • Water Resistant: 50 m with 80 hours Movement Power Reserve. 3 Clasp Closure.
Check Stock

LOTOS LT5000D 50A Air Inverter Plasma Cutter Dual Voltage 110/220VAC 1/2\ Clean Cut

  • ★ AIR PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • ★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz)..
  • ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website..
  • ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are "LCS22" or "LCS33". Please search "Lotos LCS22" or "Lotos LCS33".
  • ★ It CANNOT compatible with Lotos LCOn20, LCON40 or LCON90 Consumables Sets or any other third part consumables set. ★ PACKAGE INCLUDES: Power supply, Plasma cutting torch, ground clamp, Pr....
Check Stock

ZENY DC Inverter Plasma Cutter 50AMP CUT-50 Dual Voltage 110-220V Cutting Machine

  • 【High Efficiency & Energy Saving】-- ZENY cutter machine by using inverter technical of switch power, stable and matureit greatly reduces the dimensions and weight of main transformer, energy saving 50%, as well as the efficiency is increased by 30%. Improved cooling method for the cutting torch.
  • greatly makes the cutting consumables more endurable..
  • 【 110V or 220V Dual Voltage】-- The ability of the dual voltage allows the plasma cutter to operate at 110V or 220V, with a power of 60HZ. The plasma cutter has the function to supply gas ahead and turn off gas delayed..
  • 【Compact Design & Widely Applications】-- This ZENY compact plasma cutter has a handle for portability. Easy taking.The net weight is 22.5LB. It is perfect for perfect for home DIY and general repairing work. Ideal for both home garages and workshops..
  • 【Specification for Cutter Machine】-- Voltage: 110/220V, 60HZ, 4.8KVA.
Check Stock

FLARING Plasma Cutter Equipment 50 AMP 220V IGBT 1/2'' Clean Cut CUT50 Max 3/5‘’ Cut High Frequency Inverter Plasma Cutting Machine for Car Frame,Carbon Steel,Stainless Steel,Thin Copper,Aluminum

  • [Cutting Ability] This plasma cutter machine automatic 220v(50/60hz),10-50A dc output, 1/2″(12mm) ideal clean cut and 3/5″(15mm) maximum severance cut under 220v,70% duty cycle. The upgraded model only supports 220v voltage input..
  • [Cutting Material] Compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper,cast iron,chrome and aluminum(Aluminum≤1/4″,Copper≤1/5″).
  • [Breaker Recommendation] We suggest a 30A breaker on 220V while using this plasma cutter.Air Pressure 60-70PSI suggested.Btw,this CUT50 plasma cutting machine works well with a generator above 5000W..
  • [Fan-Runs-on-Demand cooling system]The new machine uses powerful cooling system, “dormant” fan,only operates when needed. This cuts down on fan noise, along with reducing power consumption and contaminants drawn into the machine..
  • [Warranty Assurance] We are a manufactory with over 10 years’ experience of professionals producing the plasma cutter machines,3 year’s warranty.Please add to cart and take it without hesitation.
Check Stock

Dyllica 9-8213 Plasma Start Cartridge 9-8277 for Thermal Dynamics CutMaster 52 Consumables SL60 SL100 Plasma Part Consumables 1pc

  • 【Dyllica Brand Plasma Start Cartridge】The plasma Start Cartridge 9-8277 is made by Dyllica Brand.
  • It can be used as plasma aftermarket parts which can install on DYThermal Dynamics SL60 SL100 plasma torch.
  • 【Plasma Consumables Type & Ref Number】Plasma Start Cartridge, item ref number is 9-8213 / 9-8277.
  • 【As SL60 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge can install on DYThermal Dynamics SL60 torch with Cutmaster 38 / 52 / 12 / 20 /25 plasma cutter machine.
  • 【As SL100 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal Dynamics SL100 torch with Cutmaster 102 / 152 / 40 plasma cutter machine.
  • 【As SL60QL Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal DynamicsSL60QL torch with Cutmaster 58 / 60i plasma cutter machine.
Check Stock

ARCFONY Plasma Cutter Welder Machine - 50Amp CTS528XP Non-Touch Pilot Arc Plasma Cutter, 3 in 1 200Amp TIG MMA Welders, Dual Voltage 110V/220V

  • Non-Touch Pilot Arc: 50Amp plasma cutter, pilot arc technology allows you to cut without touching the tip of the metal, effectively cutting rough, painted and rusty surfaces, producing minimum slag, maximum cutting thickness of 14mm, ideal cutting thickness of 10mm..
  • TIG & MMA Mode: 200Amp tig welder machine adopts HF arc ignition technology and has the functions of HF TIG, spot TIG and pulse TIG. The welding has little damage to the base metal and can weld thin process parts. 180Amp MMA adjustable arc current, arc welding stability. Suitable for 1.0mm to 4.0mm different acid base electrode welding..
  • Easy To Use: Plasma Cutter machine adopts IGBT inverter technology, 110/220V dual voltage automatic recognition of input current and voltage. Plasma Cutter equipped with NPT 1/4 "air regular, Duty cycle is 60%. Built-in post time, when you stop cutting, the air runs for a minute to cool the consumables of the plasma cutting torch and extending the life of consumables..
  • Safe & Portable: Built-in overload protection and fan cooling system. When the output current and machine temperature exceed the set standard, the p....
Check Stock

Warfox Plasma Cutter 120/240V Dual Voltage Plasma Cutting Machine, Max Cutting Thickness 14mm, Clean Cutting Thickness 10mm in 65PSI (CUT50D 120/240V)

  • Plasma Cutter, 120V/240V 50A plasma cutter with IGBT inverter technology, long life and efficient higher than mosfet machine. IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting.
  • Plasma cutting machine has current display function and air post time adjustment. Adjustment range is 2-20S, users can adjust the time for post air, effectively providing cooling,extend consumable's working life.
  • Max cutting thickness 14mm ,10mm quality cutting thickness in 240v@65PSI 50A.
  • Under 120V, it is 35Amps.Quality cutting thickness is 8mm, Severance cutting thickness is 12mm.
  • Accessories included:4M PT31 cutting torch, 2.5M Earth clamp,5pcs tips, 5pcs electrodes, 2 meters air hose, 4pcs hose clamp, 1adaptor, 1 manual.Air regulator,air filter,air gauge are fixed at machine.
  • The cutting machine can cut carbon steel, stainless steel, steel and other materials. It is an indispensable machine in your tool room.
Check Stock

WeldingStop 770496 770723 Electrode Tip for Hobart Plasma Cutter Airforce 250ci HP-25 and AirForce 500i HP-50 Torch

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770723 plasma cutter parts kit including 5pcs electrodes and 5pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 10pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock

WeldingStop 770496 Electrode and Tip Kit for Hobart AirForce 250ci 500i HP-25 HP-50 Plasma Torch 4-Pack

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770496 plasma cutter parts kit including 2pcs electrodes and 2pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 4pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock