ReviewsNut Fastener Square Nut

GEARWRENCH 5 Pc. Ratcheting Flex Head Flare Nut Wrench Set, SAE - 89100

  • Speed - Ratcheting jaw allows you to advance the flare nut without removing the wrench from the fastener.
  • Strength - The ratcheting flex flare nut wrench design exceeds ANSI specifications.
  • Access - Flex head can be positioned though 180 degrees to access hard-to-reach fasteners and the open end flare nut head slips easily over lines.
  • Ease of Use - Size is stamped on both sides for quick identification.
  • High Visibility - Bright chrome finish is easy-to-clean and provides high-visibility.
Check Stock

10 Pack 3/8-16 Floating Cage Nut - Weld Nuts with a Floating Cage Nut for Misaligned Holes

  • Sturdy, dependable fasteners referred to as floating nut retainers.
  • The design of this fastener allows the nut to "float" within the steel cage which is ideal for hole misalignment and blind assembly.
  • These nuts commonly used in fork trucks, rail cars, ocean containers, automobile and office furniture, appliances, and numerous other applications.
Check Stock

GEARWRENCH Ratcheting Flex Head Flare Nut Metric Wrench Set 6 Pc. - 89101D

  • Speed - Ratcheting jaw allows you to advance the flare nut without removing the wrench from the fastener.
  • Strength - The ratcheting flex flare nut wrench design exceeds ANSI specifications.
  • Access - Flex head can be positioned though 180 degrees to access hard-to-reach fasteners and the open end flare nut head slips easily over lines.
  • Ease of Use - Size is stamped on both sides for quick identification.
  • High Visibility - Bright chrome finish is easy-to-clean and provides high-visibility.
Check Stock

Channellock 422 1-1/2-Inch Jaw Capacity 9-1/2-Inch V-Jaw Tongue and Groove Plier , Blue

  • The product is manufactured United States.
  • V-Jaw gives more points of contact on objects.
  • Patented undercut tongue-and-groove design.
  • Patented Permalock fastener eliminates nut & bolt failure.
  • 100% guaranteed against breakage and failure.
Check Stock

GreatNeck #2 x 1/4 Inch Offset Screwdriver

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

Klein Tools 631 Tool Set, Nut Driver Set w/Hex Nut Sizes 3/16, 1/4, 5/16, 11/32, 3/8, 7/16 and 1/2-Inch on 3-Inch Full Hollow Shaft, 7-Piece

  • Tool Set has general-purpose selection of the most frequently used nut drivers.
  • Nut Drivers full hollow shafts facilitate work on long bolt applications with internal flanges that provide solid,twist-resistant shaft anchor.
  • Cushion Grip handles allow for greater torque and comfort.
  • Tip-Ident quickly identifies nut driver hex orientation and size by color coding the handle ends so you can easily engage the nut driver with the fastener.
Check Stock

Wiha 32097 | 7 Piece Insulated SoftFinish Screwdriver Set

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

XtremepowerUS Multiplier Torque Wrench Labor Saving Lug Nut Wrench Cr-v Socket (Torque Wrench W/ 4 Socket) + Case

  • Suitable for most trucks, buses, RVs, semi-trucks and other heavy duty vehicles (not recommended for small passenger cars).
  • Perfect Size Set - Torque wrench multiplier set includes (1) 1-inch drive torque multiplier heavy duty lug wrench, (1) rocking bar handle, (3) 6-point sockets, (1) 4-point square socket, and (1) extension bar.
  • 6-point sockets include sizes 1-5/8 inch (41mm), 1-1/2 inch (38mm), and 1-5/16 inch (33mm).
  • This labor saving wrench set fits your other 1-inch drive sockets.
  • Durable Torque Multiplier - Constructed of alloy steel, these torque multipliers are designed for maximum strength and longevity.
  • With 1:58 gear ratio bringing 3200 NM, the torque multiplier lug nut wrench set easily produces a sufficient output torque to loosen stubborn nuts with minimal effort.
  • 10.6 inch (26.9cm) rocking bar features a textured rubber foam handle for better grip and increased friction.
  • Simple to Use - Remove lug nut caps and place correct socket on to the lug nut.
  • Connect cheater wrench to socket and anchor the brace rod against wheel hub or an adjacent lug nut to ensure steady operation and leverage.
  • Attach the handle and turn in the direction you wish to move the nut, extension bar helps to r....
Check Stock

Klein Tools 631M Tool Set, Magnetic Nut Drivers Sizes 3/16, 1/4, 5/16, 11/32, 3/8, 7/16 and 1/2-Inch on 3-Inch Full Hollow Shaft, 7-Piece

  • Nut Drivers' full hollow shaft designed with Rare-Earth magnetic tips facilitate work on long bolt applications.
  • Tool Set contains Nut Driver Cat. Nos.: 630-3/16M, 630-1/4M, 630-5/16M, 630-11/32M, 630-3/8M, 630-7/16M, 630-1/2M.
  • Cushion Grip handles allow for greater torque and comfort and internal flanges provide solid, twist-resistant shaft anchor.
  • Tip-Ident quickly identifies nut driver hex orientation and size by color coding the handle ends so you can easily engage the nut driver with the fastener.
Check Stock

ABN Double Side Socket 4-Piece Impact Lug Nut Socket Set - 1/2 inch Drive Flip Sockets Thin Wall Tire Sockets

  • [Flip-Style Lug Nut Socket Set] Change tires, repair brakes, or replace ball joints and bushings easily with the ABN Double Sided Lug Nut Socket Locking Lug Nut Removal Tools.
  • Fits 6 of the most common lug nut sizes for removal and installation.
  • [Various Sizes to Meet Your Needs] Lug nut impact socket set includes a 19mm to 17mm socket, a 13/16-inch to 3/4-inch socket, a 7/8-inch to 21mm socket, and a 1/2-inch drive extension bar.
  • [Unique Design] Thin wall wheel sockets feature 6 point flank drive for a snug hold without damaging fastener corners.
  • 3-inch (7.6cm) extension bar and thinner walls ensure clearance into tight recessed wells.
  • [Built to Last] Drop forged, heat-treated chrome-molybdenum steel (CR-MO) provides maximum strength and durability while the black oxide finish resists corrosion.
  • [Convenient Storage] 5.5 x 5 x 2-inch (14 x 12.7 x 5.1cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • Each impact lug socket has laser-etched size labeling for easy identification.
Check Stock

ARES 70650 - 6-Piece SAE Magnetic Impact Nut Driver Bit Set - Impact Grade Nut Setters with Industrial Strength Magnets

  • ...EM SPECIFICATIONS: These 6-inch-long magnetic nut drivers are made from impact grade Chrome Vanadium steel and Manganese Phosphate coating to help prevent rust and corrosion. These impact nut drivers have a 1/4-inch hex shank that fits any standard quick connect drill chuck and an extra strength magnet for superior fastener retention. These drivers are built to last!.
  • THE QUALITY YOU NEED: Whether you're working on racks, mounting panels, or gears, these magnetic nut drivers come through every time and snap right into your impact driver. They are full length, impact grade and help you reach where your fingers can’t..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Magnetic Impact Nut Driver Set, simply contact customer service for troubleshooting help, parts, replacement, or refund..
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization..
Check Stock