ReviewsNut Thread Rod

uxcell 10 PCS M3 3.0xL15mm Lever Steering Linkage Tie Rod End Ball Head End for RC Helicopter

FEATURES: Center Hole Diameter: 3.0mm/0.12 inch, Bottom Hole Diameter: 2.8mm/0.11 inch, Total Length : 15mm/0.59 inch, Fit Rod Thread: M3.
SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
PACKAGE CONTENT: 10 Pcs x Ball Head Holder Tie Rod End(with Screws and Nut).

FEATURES: Center Hole Diameter: 2.0mm/0.08 inch, Bottom Hole Diameter: 1.65mm/0.065 inch, Total Length : 19mm/0.75 inch, Fit Rod Thread: M2.
SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
PACKAGE CONTENT: 10 Pcs x Ball Head Holder Tie Rod End(with Screws and Nut).

【Dimension】Screw Thread Specification: M6 x 50mm.
【Good Quality】Made of quality carbon steel material,spraying treatment,sturdy and anti-rust, easy to bind, install and remove, can use repeatedly, good tightness..
【Easy to Use】Easily applied with standard screwdriver. Threaded post lets you open and re-attach piece where needed..
【Instructions】Make a hole larger than 0.5mm than the diameter of the nut rod, put screws and nuts on both sides of the locked object, and select the appropriate tool to lock it..
【Wide Application】Especially suit for leather handicrafts decoration, bookbinding, document, book, album, DIY crafts, etc..

【Dimension】Screw Thread Specification: M6 x 45mm.
【Good Quality】-Made of quality carbon steel material, zinc plated surface, sturdy and anti-rust, easy to bind, install and remove, can use repeatedly, good tightness..
【Easy to Use】Easily applied with standard screwdriver. Threaded post lets you open and re-attach piece where needed..
【Instructions】Make a hole larger than 0.5mm than the diameter of the nut rod, put screws and nuts on both sides of the locked object, and select the appropriate tool to lock it..
【Wide Application】Especially suit for leather handicrafts decoration, bookbinding, document, book, album, DIY crafts, etc..

【Dimension】Screw Thread Specification: M6 x 20mm.
【Good Quality】-Made of quality carbon steel material, zinc plated surface, sturdy and anti-rust, easy to bind, install and remove, can use repeatedly, good tightness..
【Easy to Use】Easily applied with standard screwdriver. Threaded post lets you open and re-attach piece where needed..
【Instructions】Make a hole larger than 0.5mm than the diameter of the nut rod, put screws and nuts on both sides of the locked object, and select the appropriate tool to lock it..
【Wide Application】Especially suit for leather handicrafts decoration, bookbinding, document, book, album, DIY crafts, etc..

FEATURES: Center Hole Diameter: 2.0mm/0.08 inch, Bottom Hole Diameter: 1.8mm/0.07 inch, Total Length : 19mm/0.75 inch, Fit Rod Thread: M2.
SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
PACKAGE CONTENT: 10 Pcs x Ball Head Holder Tie Rod End(with Screws and Nut).

FEATURES: Center Hole Diameter: 3.0mm/0.12 inch, Bottom Hole Diameter: 2.8mm/0.11 inch, Total Length : 29mm/1.14 inch, Fit Rod Thread: M3.
SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
PACKAGE CONTENT: 10 Pcs x Ball Head Holder Tie Rod End(with Screws and Nut).

The handheld equipment includes an aluminum-made mount, a rough thread rod, a solid steel nut, 2 pieces of lever handles and a 3-piece aluminum brick mold..
The Internal dimension of the 3-piece brick square maker : 2.47"(width) x 4.36" (Length) x 1.75" (Depth), we do not recommend putting the paper inside of the maker..
The equipment is very easy to use by hands, just insert the press handle to the doube-side holes of the press and insert another handle to the hole on the thread rod, and then twist two handles hardly..
The press made of 6061 aluminum that is capable of being heated, preheat the maker or put the press inside of the hot water..
Well noted, the aluminum maker only works with the thread press, please do not pair it with other equipment to protect it from damage but the thread press works with 2x4" or cylinder prepress, the dimension of the base: 5"L x 3.1"W x 4.3" ( Max Height )..

Size - Applicable Hole Dia: 5/16 inch(8mm).
Nut Head Diameter: 13mm, Thread Pitch: 1mm..
Materials - Made of carbon steel material, galvanized, the screws are strong and durable for use..
Easily use: Easily applied with standard tool. Threaded post lets you open and re-attach piece where needed..
Notice - The thickness of the object which is locked, at least 3mm less than the length of the screw rod + nut rod, otherwise, it will not be able to tighten..
Application - Widely used in DIY projects, clothing making, leather crafts and furniture installation. Can be use for leather belts, leather bags, helmets, etc.They are ideal replacement parts for your bed frames, tables, chairs, cabinets, workbench, wood boards, wardrobes and so on..