ReviewsNylon Braided Hose

EVIL ENERGY 6AN 3/8 PTFE LS Swap EFI Fuel Line Fitting Kit E85 Nylon Braided Fuel Hose 25FT

PTFE nylon braided fuel line kit mostly used in EFI LS system and can be used as fuel injection hose, ls engine swap and EFI conversion fuel line,....
Inner Diameter: 5/16". Outside Diameter: 0.465inch. Please measure before purchase!(Includes: as shown in the picture.).
Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. AN-6 nylon braided....
PTFE fuel hose can be compatible with all automotive fuels, lubricants, and coolant..
PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

Check Stock

Eastman 41025 Stainless Steel Steam Dryer Installation Kit, 6 Ft Length, Silver

DIMENSIONS: Hose measures 6 Ft with the 90-degree elbow to allow closer installation to a wall.
72-inch X 3/4-inch FHT X 3/4-inch FHT fill hose.
BUILT FOR PRESSURE: The design of this high-pressure stainless steel hose prevents it from kinking and crimping.
(1) 6 ft fill hose with 3/4″ FHT connection and a 90-degree elbow, (1) 1 ft hookup hose with 3/4″ FHT connections, and (1) Y Adapter.
LONG-LASTING: This hose features a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior to withstand high-pressure and full-flow.
UNIVERSAL: This kit comes with all the necessary components to install your steam dryer to the water supply.

Check Stock

10FT 6 AN 3/8\ Nylon Stainless Steel Braided PTFE E85 Tube Fuel Line Fittings Kit with 6PCS Swivel Fuel Hose Fitting Adapters

【High Quality】This hose features an PTFE inner layer which is compatible with E85, wrapped by a single layer of stainless steel and nylon. These lines do not deteriorate or swell over time due to E85 use like non-PTFE fuel line. PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line..
【Application】The fuel line is widely used in fuel system, transmission system and cooler system and can be compatible with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel, and etc..
【Package Includes】The 6an nylon and stainless steel braided PTFE fuel line kit includes: 6pcs 6an PTFE hose ends (2pcs straight, 2pcs 45 degree, 2pcs 90 degree) and 3/8 PTFE braided fuel line (Length:10ft/3M)..
【Work Condition】The 6an PTFE hose working temperature range: -76℉ to 446℉ (-60℃ to 230℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 3000 psi. Bursting Pressure (psi): 10000psi..
【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..

Check Stock

Vinco s - OsteoSheath4 - 120 Tablets by Vinco

Package Including: 20 Ft Braided Fuel/Oil/Gas Line Kit(10pcs 6AN hose fitting + 20Ft AN6 Stainless Steel Oil line).
Universal Application: The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas....
Hose Material: Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
The fitting is made of T6061 Aluminum,high strength and good durability..
Working Temperature: -40 F to +248 F. Working Pressure:500 PSI.
Excellently Sealed,100% no leaking .Exchange or return if leak..

Check Stock

Beaquicy 4 Ft Washing Machine Hoses Burst Proof Braided Stainless Steel - Fit for ALL Washers - Red and Blue Washer Hoses(2 Packs)

.../4" NPT connections on either end are a perfect fit for your washer and supply tap.Extra-thick rubber washer can form a better seal at each connection point..
✅【SAFETY MATERIAL】- 4 ft washing machine hot and cold water hose is made of ultra-high tensile strength braided stainless steel, two layers of PVC core, reinforced nylon wire in the middle, ensures effective performance holding quality and is completely explosion-proof. It is built to withstand full flow, preventing water leaks kinking crimping and corrosion.This washer hoses can be used in high and low temperature environments..
✅【5 YEARS WARRANTY】- The product 4 Feet braided washer machine hoses supports 5 YAERS return and exchange.Our company attaches great importance to the shopping experience of each customer.Risk-free shopping, If you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve the problem. Customer satisfaction is our tireless pursuit..
✅【WIDE COMPATIBILITY】- The 4 Foot Braided Stainless Steel Water Supply Line Fit for ALL Washers for all washers, can be easily co....

Check Stock

Eastman 48378 Stainless Steel Braided Washing Machine Hoses with 90 Degree Elbow 3/4 inch FHT 6 Ft 2 Pack 6 Pair

✅BURST PROOF- Constructed of a heavy-duty PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 braided....
✅UNIVERSAL- Each braided washing machine hose measures 6 feet in length. Equipped with brass nuts that are nickel-plated with stainless steel....
✅COMPLETE- The washing machine hoses are equipped with 3/4 inch Female Hose Thread (FHT) x 3/4 inch Female Hose Thread (FHT) connections..
✅SAFETY and QUALITY- Features a working temperature of 15-degrees Fahrenheit to 158-degrees Fahrenheit. For residential use only. CSA certified and....
✅INSTALLATION- Equipped with 90-degree elbows for strain relief and easy installation in tight places..

Check Stock

MOTAFAR 6AN 45 Degree Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

6AN 45 degree hose end fitting is suitable for all oil/ fuel/ water/ fluid/ air line, fit all stainless braided and nylon braided hose, can't fit PTFE fuel line and rubber fuel line.
Max working pressure is 1000psi, working temperature range is -65℉ to 252℉ (-53℃ to 122℃).
Designed for smooth flow, easy assembly, completely reusable, just disassemble and put onto another hose.
No leakage under high pressure and temperature.
Black anodized for durability, great appearance, and anti-corrosion.

Check Stock

6AN 3/8 Fuel Line Hose Nylon Stainless Steel Braided CPE Oil Gas Automotive Replacement Fuel Hoses 10FT(3m) Shineyoo

Safety performance: Excellent flame retardant, Outer braided has long service life, excellent inflaming and safer to use, to Ensure reduce the possibility of hose burst..
Upgrade Material: Using high-quality nylon fiber and stainless steel wire materials to replace the ordinary, More Flexible and More Wear-resistant..
Universal Application: Can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel..
Product Specification: inner hose: CPE synthetic rubber.
The middle layer: 304 stainless steel wire mesh sleeve.
The outer layer: High quality braided nylon,Working Temperature: -40 ℃ to +148.9 ℃.
Warming Notes: AN6, Length: 3m/ 10ft, Outside Diameter:0.55inch (14.22mm), Inner Diameter: 0.34inch (8.71mm). Please double check the hose size before bidding, and Professional installation is highly recommended..

Check Stock

Master Airbrush Premium 6 Foot Nylon Braided Airbrush Hose with Standard 1/8 Size Fitting on One End and a 1/4 Size Fitting on The Other End Hose Color May Vary

Master Airbrush Brand Premium 6 Foot Nylon Braided Airbrush Hose.
Fits Iwata, Devilbiss and Master Airbrush Brands, as well as many other popular brands.
Connections: 1/8" BSP Female and 1/4" BSP Female.

Check Stock

8AN 20FT Fuel Line Hose Kit with End Fittings Nylon Stainless Steel Braid Black 1/2' - 11.12mm ID (AN8)

【Includes】The 8AN nylon and stainless steel braided CPE fuel line kit includes: 10pcs 8an CPE hose ends (4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends) and 1/2 CPE braided fuel line (Length:20ft/6M).
【Materials】The 8AN CPE fuel line Hose mostly used in cooler system and pump, fuel system, transmission system, Can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, coolant, fuel, and etc, but not applicable to E85..
【Lifetime】The 8AN CPE hose working temperature range: -40℉ to 257℉ (-40℃ to 125℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi..
【CPE Hose】The 8an CPE hose fitting is reused, just replaced a new olive/ferrule when reusing fittings with CPE hose. CPE tube is constructed with a seamless extruded CPE resin inner tube..
【Warranty】Three months limited warranty & Free lifetime technical support..

Check Stock

98 Inch Shower Hose Extra Long | Shower Head Hose | Handheld Showerhead Hose| Long Shower Hose Extension | Shower Pipe for Bathroom, Toilet, Hand Held Shower Hose Extension (98 inches, Chrome)

✅SAVE $$$ – HIGHLY DISCOUNTED INTRODUCTORY OFFER FOR A LIMITED TIME! For a limited time, get our extra long shower hose for 40% OFF!.
✅ENJOY A LUXURY SHOWER EXPERIENCE – WHAT MAKES OUR SHOWER HOSE DIFFERENT? Our long shower hose is the only hose on the market that is nylon braided. We have used our experience in this market to carefully select our nylon braided hose to ensure that it is explosion and leak proof. We also include extra washers in case you ever need them.
✅NO MORE TWISTED HOSE – Our innovative structural design keeps your shower head hose kink-free. It’s also very sturdy and comes in a nice brushed nickel finish. The external tube of our shower pipe is made of 100% high density 304 stainless steel, and it has two solid BRASS connectors. This means it will last and not pollute your water – you will have a better bathing environment and also protect your skin.
✅FITS YOUR HOME’S SHOWER SYSTEM & PLENTY OF LENGTH TO ENJOY A COMFORTABLE SHOWER – Our shower hose connectors are 1/2″ US Standard threads size, fitting more than 99.9% of US shower systems. Please note that the thread for the hose is international G thread standard and not US NPT thread standard which may be on some o....

Check Stock