ReviewsNylon Mounting Bolt

Peck Slither and Slide

Compatible with deck heights of 53 to 60 inches.
Mounting lumber not included - Required 5/8 x 3/8 x 20 3/8 inches.
Mounting hardware not included - Rounded Head 5/16” Bolt x 1 ¼” long with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work. ).
One-piece construction for easy assembly.
Shipping dimensions -118” x 17” x 26”.
Limited Lifetime against cracking and fading.
Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. is applicable for intended use only..

Check Stock

SuperATV Black Ops 6000 lb Winch with Winch Mounting Plate for 2020+ Polaris RZR PRO XP/RZR PRO XP 4 | Complete RZR Winch Kit Ready to Install!

【 Fits】2020+ Polaris RZR PRO XP / RZR PRO XP 4 | Please Note: Not compatible with Polaris front high coverage bumper, part # 2883749 / not compatible with winches using a 76mm x 124mm (3" x 4 7/8") mounting bolt pattern..
【Complete, Bolt-On Ready Winch Kit】Ready to make sure you are not stranded on the trail? This kit is exactly what you need. It includes our Black Ops 6000 lb winch and a winch mounting kit specifically made to fit perfectly on your Polaris RZR. A strong mount is just as important as a strong winch—don’t get caught with a mount that can’t take the weight of your machine..
【6000 lb SuperATV Winch】100% waterproof Polaris RZR winch | Powerful permanent magnet 12V 1.9 Hp Dc Motor | 6000 lb. rated line pull synthetic 50' rope | 266:1 Gear ratio | Winch dimensions (Lxwxh) = 14.56” X 4.41” X 4.86” | Mounting holes: 76mm x 169mm (3" x 6 5/8") | Fairlead bolt pattern: 152mm (5.98").
【Machine Specific Mounting Plate】Mount made specifically to fit your PRO XP | Made with 3/16” steel plating | UV-r....

Check Stock

Elephant Anchors [50 Sets+ Drill Bit] - TV mounting Bolts for TV Mount into Drywall & TV Mount into Metal Studs Dual Use Drywall Anchors When no Studs or anchoring into Metal Studs

DUAL USE : NO STUD OR METAL STUD : Mount your TV anywhere, Use when no studs align to the tv mount holes or when mounting on metal stud walls. Best anchors for mounting TV with Tilt or Fixed TV Mounts. Mount up to 90lbs TVs. 50 anchors, screws , washer and drill bit are included..
A Revolution in Mounting - Our drywall anchors can be pre-installed without using a bolt and don't fall behind the wall when the bolt is removed. The Elephant anchor provides a secure hold from within various hollow materials 3/8" to 3" thick including drywall, MDF, sheetrock, plasterboard, sheet rock, gypsum board, buster board, and custard board..
Heavy Duty Mounting - Perfect for TV mounting and hanging curtain rods, lamps, photo frames, coat racks, flat panel TVs, lighting fixtures, hand rails, grab bars, ADA hardware, shelves, cabinets, barn doors, solar panels, garage doors, sinks, brackets, a shower door, and so much more!.
Quality Construction for Quality Construction - Each anchor consists of a corrosion-resistant zinc-plated metal channel.
plastic straps attached to the channel that position it into place.
and a plastic flange that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material..

Check Stock

POROHOM 12 PCS Trampoline Screws, Long Screw Trampoline Replacement Parts,Anti-Loose Trampoline Bolts and Nuts,Trampoline Accessories Trampoline Stability Tool- 3 in

Application: The trampoline screws are compatible with many different trampoline brands. The installation of long screws on the trampoline can make the trampoline more stable and not easy to shake..
Package Includes: 12 x Trampoline Screws, 1 x open wrench. Important note, Nylon lock nuts are used in our trampoline screws kits, and Nylon Lock Nuts Use the matching wrench to tool to screw in..
Nylon Insert Lock Nuts are also known as stop nuts. Lock nuts are used for fastening to a bolt when mechanically joining materials together. The bolt threads into the nylon material are located at the top of the nut. The purpose of the nylon insert is to prevent backing off or loosening from vibration..
Compared with the bolt heads of other brands of trampoline screws, the square shoulder underneath the rounded head is unique because this design can resist rotation when the nut is removed or tightened..
Wide Range Of Uses:The 12-piece bolt and nut set can be widely used in trampolines, cribs, bunk beds, chairs, cabinets, workbenches and other furniture.
it can also be well connected to wood, headboards and cabinets..

Check Stock

MDLUU Leveling Machine Casters with Rubber Pad FM-60F Plate Mounted Retractable Workbench Caster Leveling Feet Wheels Loading Capacity 551lbs/Per Pack of 4

MATERIAL: These leveling casters are made of solid metal , NBR pad and nylon wheel.
SIZE: Top plate is 2.87"× 2.87" (L×W), Mounting hole diameter is 0.27", Bolt holes distance is 2.28"× 2.28" (L×W), Wheel diameter is 2", Overall....
LOAD CAPACITY: Each leveling caster loads up to 551 lbs, 4 packs casters easy to hold 2204 lbs heavy duty machine.
PERFECT SOLUTION: Leveling casters can freely move the heavy duty items and put in one position by manual adjust NBR pad.
GREAT FOR: Mounting on the carpenter workbench, equipment cabinets, vending Machine ,bank operating devices and other heavy duty items.

Check Stock

Backyard Discovery 10 Foot Wave Slide, Easy One Piece Installation, Yellow

10' (118" actual length) Wave slide is compatible with deck heights of 53 to 60 inches high.
Age Range: 3 to 10 - Supports up to 250lbs.
Super deep wave slide (actual depth is 10") ensures children remain safe while sliding.
Mounting lumber not included - Recommended 5/8 x 1 3/8 x 20 3/8 inches.
Mounting hardware not included - Recommended rounded head 5/16” bolt with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work.).
Strong one piece construction with 3 bolt installation.
Limited Lifetime Warranty against cracking and fading.
Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. Warranty is applicable for intended use only..
Assembled dimensions-118" x 23.5" x 18" - Shipping dimensions -118” x 17” x 26”.

Check Stock

Otis Technology B.O.N.E. Tool, 7.62mm

16-in-1 multitool to scrape and eliminate carbon fouling from multiple surfaces, including bolt and bolt carrier group.
12 precision cut non-hardened surfaces scrape all 4 major parts of the bolt without marring or scratching.
Replaceable, nylon/phosphor bronze detailing brush, 360 degree phosphor bronze brush, cotter pin puller, and a pin punch.
Ballistic nylon protective sheath with carry strap provides for easy transport to the field, the range, or at the workbench.

Check Stock

Backyard Discovery 10 Foot Wave Slide, Easy One Piece Installation, Green

Compatible with deck heights of 53 to 60 inches.
Mounting lumber not included - Required 5/8 x 3/8 x 20 3/8 inches.
Mounting hardware not included - Rounded Head 5/16” Bolt x 1 ¼” long with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work. ).
One-piece construction for easy assembly.
Shipping dimensions -118” x 17” x 26”.
Limited Lifetime against cracking and fading.
Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. is applicable for intended use only..

Check Stock

Otis B.O.N.E.® Tool (7.62MM) FG-276

16-in-1 multitool to scrape and eliminate carbon fouling from multiple surfaces, including bolt and bolt carrier group.
12 precision cut non-hardened surfaces scrape all 4 major parts of the bolt without marring or scratching.
Replaceable, nylon/phosphor bronze detailing brush, 360 degree phosphor bronze brush, cotter pin puller, and a pin punch.
Ballistic nylon protective sheath with carry strap provides for easy transport to the field, the range, or at the workbench.

Check Stock

SENSHINE Tow Strap JDM Racing Tow Strap for Front or Rear Front Bumper Trailer Hook Traction Rope Modification JDM Accessories Decorative Trailer Belt with Chinese Slogan 2-pc Set (Blue)

【Chinese Slogan】Chinese Slogan meaning: Good luck and Safe wherever you go..
【JDM Stylish Design】Multi-color nylon tow straps are available to choose, match with Chinese slogans in white fonts. Enrich your car's style and make your car more recognizable, also convenient for you to drag your car away..
【Material】The tow racing straps are made of high quality nylon and steel materials, durable and not easy to fade, resistant, rust or corrode , supporting a long term service..
【How to Install】Screw mounting: install them on the tow hook with the bolt and the nut, you may need to drill your bumper to install it if the screw is not suitable. Nylon ties: you just need to tie them to the grille with nylon ties, it is more convenient..
【Package Include】2 PCS tow straps, 2 PCS bolts, 2 PCS nuts, 8 PCS cable ties. If you have any problem,please contact SENSHINE service team first, we will deal with you within 24 hours..

Check Stock

NEW 55-57 CHEVY FACTORY REPLACEMENT CLUTCH PEDAL CROSS SHAFT BOLT AND BUSHING KIT PUSH ROD TRI-5 1955 1956 1957 150 210 BEL AIR NOMAD SEDAN DELIVERY DEL RAY

Brand New Southwest Speed Factory Replacement Clutch Pedal Cross Shaft Bolt and Bushing Kit that fits 1955-1957 Tri-Five Chevy's with Manual....
This Southwest Speed clutch pedal cross shaft bolt and bushing kit are a reproduction of the original clutch pedal push rod bolt and bushing used on....
This kit includes a steel shoulder bolt, two delrin bushings, 3 flat washers, and an nylon locking nut > The shoulder bolt and bushings will look,....
Features: > Steel shoulder bolt with black oxide finish > Factory reproduction > Corrosion-resistant lock nut with nylon insert > Required for....
Applications: > 1955-1957 Chevy Bel Air > 1955-1957 Chevy 150 > 1955-1957 Chevy 210 > 1957 Chevy Del Ray > 1955-1957 Chevy Nomad > 1955-1957 Chevy....

Check Stock