ReviewsO ring Fittings

MaxLine RapidAir M8040 1' In Line Ball Valve For 1 Inch Max Line Air Tubing

This is a Maxline Part Number M8040 - 1" in-line shut off ball valve for Rapidair MaxLine 1" tubing..
This is a solid brass valve that is nickel plated to resist corrosion..
This ball valve has a 175 PSI max working pressure and features a double o-ring sealed compression style fittings on each end specifically designed to be used only with the 1" MaxLine air system tubing..

Back Pullout design for service without disturbing piping.
Two compartment motor for access to wiring and replaceable components.
Nozzle clean out plug in Shallow well adapter, premium O-RING design fittings need only be hand tight to seal.
Corrosion resistant, plastic tubing and fittings are easily removed for cleaning.

Applications: 90-93 Honda Accord DX, LX, SE, EX F22 and.
Applications: 92-01 Honda Prelude S, Si, Si VTEC F22, H23 and H22.
O.E. fuel pressure regulator or AEM adjustable fuel pressure regulator mounts directly to rail with no modifications.
Comprehensive installation instructions, hardware, fittings and injector O-rings included.
No additional parts required for installation.

Drainzit oil hoses make changing oil easier and cleaner. Drainzit is easy to install, simple to use and requires no engine modification. For use on nearly all equipment powered by small engines: pressure washers, generators, pumps/sprayers, compressors, lawn mowers and more. Fits most briggs and stratton, tecumseh engines with 3/8 in. pipe thread oil drain port, Kohler command and OHC 16 and 18 HP Fittings convert to SAE wrench sizes Efficient - custom made metric fittings seal kit to.
Fits most briggs and stratton, tecumseh engines with 3/8 in. pipe thread oil drain port, Kohler command and OHC 16 and 18 HP.
Efficient - custom made metric fittings seal kit to engine with O-ring.
Rubber retainer loop holds kit in place when not in use.

[Application] Universal fuel filter, includes an6, an8, an10 adapters for different size applications..
[Material] Aluminum alloy fuel filter can and stainless steel filter element..
[O-ring] The o-ring provides a tight seal for fittings and end caps..
[Function] Can be used for filtering gasoline, diesel, E85, etc. Captures contaminant particles of 10 micron and above to protect the fuel system of the vehicle..
[Feature] Removable design, easy to clean or replace filter element at regular time..

Back Pullout design for service without disturbing piping.
Two compartment motor for access to wiring and replaceable components.
Nozzle clean out plug in Shallow well adapter, premium O-RING design fittings need only be hand tight to seal.
Corrosion resistant, plastic tubing and fittings are easily removed for cleaning.

100% bolt-on unit replaces the factory oil bypass cover, just above the oil filter, and makes for easy installation of an oil cooler on any rear sump GM LS family engine. No oil filter relocation is required.
Slim design provides maximum clearance for aftermarket headers.
Features two 1/8” NPT ports for oil sensors or a turbo oil supply line.
6061-T6 billet aluminum construction and black anodized finish. Female -8AN O-ring boss threads. Includes two black anodized aluminum fittings with Viton O-rings for -10AN lines.
Made in USA. Lifetime manufacturer's warranty.

This listing is for eight (8) double stud fittings with a RATED CAPACITY* of 5,000 lbs. The W.L.L.** (working load limit) is a 1,666 lb. capacity. This fitting fits all aluminum track that is similar to the track shown in the secondary image above. We refer to the track as aluminum load track. It is also commonly referred to as airplane track, seat or simply S track..
RATED CAPACITY: Also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new. **W.L.L. The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity..
The fitting is SPRING LOADED to permit simple attach and detach operation. To detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases. To attach, rest the fitting in the load track, then push down on the base and push forward..
Double stud refers to the number of "fingers" that it captures when attached to the aluminum track. Base measures 2-1/2" long x 7/8" wide. 1/4" thick steel "O" ring measures 2" in diameter, large enough and plenty strong enough ....

2 rubber cones ends for quick check (no need to thread into head).
3″ Gauge has dual color scale with 0-300 PSI, 0-20 kPa.
Fittings: M10, M12, M14, M18 (Male, With “O” Ring), Includes 14mm and 18mm spark plug adapters.
Gauge will hold pressure values and has quick push button release valve.
Comes with 1/2″ diameter x 18″ extension hose, straight and angled fittings, rubberized gauge protector and a blow mold case..

> [COMPATIBLE]: Replacement Part for Soft Nose O-Ring on Propane P.O.L. Fittings. Suitable for propane adapters, pipe connectors, elbow sealing....
> [EASY INSTALL]: If your adapter O-ring is defective or has been used for a long time, it is easy to repair. It is recommended to lubricate them with....
> [FEATURE]: Gasket can avoid leakage of thread seal. If the sealing ring is worn, aged or compressed, it will cause leakage of dangerous gas. As long....
> [PREMIUM QUALITY]: Strict quality control standards to Build and test. Pretty easy to snap into place. Not OEM but fits OEM Standards, the quality....
> [Guarantee and Service]: The Propane Gas Patio Heaters kit completed with a One-year Warranty. Save much money off dealer prices. If the kit once....

The inline fuel filter are designed for use in both carbureted and EFI fuel systems. Protects your vehicle’s fuel system from contaminants, such as dirt, rust, and paint particles. Traps contaminants before they enter the fuel delivery system for improved engine performance.
The filters are constructed from anodized aluminum for a corrosion resistant, durable and sturdy, and feature a reusable 100 micron stainless steel mesh element. Great for Gasoline, E85 Ethanol Fuel and Diesel.
The AN push lock fitting featured a 37-degree mating angle which provided superior sealing. The o-ring seals do a good job sealing the fittings and end caps.
8AN inline fuel filter kit with 2 pcs bulkhead adapters, 2 pcs push lock fittings, 1 Pc fuel pump filter bracket, 4 pcs adjustable hose clamps and 2 pcs o-ring seals.
SYKRSS value your shopping experience, if you encounter any problems in installing the fuel filter, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.