ReviewsOak Fancy Plywood

Andis Blade Care Plus Jar

  • Professional Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use..
  • INDUSTRIAL QUALITY UPCUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool’s cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Up to 2.5X longer life compared to uncoated bits..
  • The 1/4-Inch flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp..
  • The spiral router bit suit for CNC router and any plunge routers with 1/4″ collet..
Check Stock

KAKURI Japanese Woodworking Tool Set Professional Carpentry Tool Kit 8 Pcs Japanese Pull Saws Hammer Chisels Plane Auger Square Japanese Red Oak Made in JAPAN

  • ...ain direction. It will allow any craftsman to tackle a wide range of carpentry. [2. Japanese Pull Saw (Hardwood 8")] It cut effortlessly not only general hardwood (oak, sandalwood, mahogany, maple, walnut, and pine) but also solid materials such as ipe and ebony. It also cuts old wood materials, laminated wood, and plywood..
  • [3. Japanese Woodworking Hammer] [4. Japanese Block Plane] [5. Japanese Woodworking Auger] [4. Japanese Woodworking Square] These are traditional Japanese tools used for various kinds of woodworking, such as nailing, chiseling, finishing wood surface, chamfering, making a pilot hole, drilling, and measuring..
  • COMFORT WOODEN TOOLS: The handle, grip, plane's body are made of Japanese high-quality red oak with an oil finish. It fits in your hand and supports your comfortable woodworking work. The hard and durable oak, which is hand-finished by craftsmen, fits in your hand, the more you use it..
  • EASY INTERCHANGEABLE BLADE: The saw blade is replaceable and compatible with all blades and handles in the same series. It is possible to combine the blade and handle as you want. To change the blades, simply lift the locking mechanism, slide the blade in, close the mechanism, and you are ready to start the project. It does not require screws or....
Check Stock

Liberty Furniture Industries Magnolia Manor Gathering Table, W60 x D35 x H36, White

  • Poplar Solids w/ Cathedral White Oak Veneer.
Check Stock

Sunset Trading Shades of Gray China Cabinet, Weathered Grey

  • ✔ feet carry the recessed channel to Complement the table | crafted from kiln-dried solid oak and Birch veneer | French Dovetailed drawer fronts | English Dovetailed drawers open smoothly on waxed wood Glides with drawer stops for safety | dust cover on bottom of case.
  • ✔ stained Luan Mahogany plywood back that recesses into the case securely with screws | drawers constructed of seven-ply furniture grade plywood, Sanded and lacquered | Anti-tipping device provides safety for your loved ones and pets | each cabinet has one non-adjustable 1.8” Smooth edged Glass shelf with solid wood support divider between | factory installed Glass door inserts with rubber gaskets.
  • ✔ Dimensions: overall: 62"h x 19"D x 52"W | drawers (4): 9"H x 14.75"D x 18.25"W | cabinet interior (without shelf): 29.5”H x 16.75”D x 47.5”W | bottom cabinet area: 14.25”H x 16.75”D x 47.5”W | Top cabinet area: 15.25”H x 16.75”D x 47.5”W | Glass doors (2): 28.5"H x 1"D x 21"W | nouveau-style square turned and tiered solid wood bun feet: 5.5"H x 2-4.5"D x 2-4.5"W | weight: 142 lbs..
Check Stock

Spetool 90 Degree Carbide V Bits with Tiain Coated 4 Flutes Chamfer End Mill for Caving V Groove and Sign

  • Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length..
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
  • V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..
Check Stock

Unique Wooden Walking Cane for Men - Lion King - Carved Wood Canes Unusual Walking Stick

  • Unique design! Lion head was designed by the famous jeweler, it's very detailed.
  • Hand-carved from top-quality solid oak wood.
  • Finished with hypoallergenic high-quality Italian coatings.
  • The total length is 36" but you can cut the cane down if you need to make it shorter.
Check Stock

Craftmade GD52ABZ5C Grandeur Unipack Triple Mount 52\ Ceiling Fan with 240 Watts Light Kit, 5 Plywood Blades, Aged Bronze

  • GRANDEUR CEILING FAN WITH LIGHT: Includes (4) 60 Watt Candelabra Base Light Kit, 240 Total Watts.
  • Height: 20.77" (From Ceiling to Bottom of Fan Light, Includes 4" Downrod).
  • FAN BLADES: 5 Dark Oak / Mahogany Plywood Blades (52" Span / 12° Blade Pitch).
  • FAN CONTROL: Includes 3 Fan Speed Pull Chain with Reversing Function.
  • INSTALLATION: Triple Mount (Flat Ceiling or Sloped Ceiling Downrod Mount, or Semi-Flush mount).
Check Stock

SpeTool Tapered Ball Nose Spiral Router Bit 1.0mm Tip Diameter (0.5mm Radius) 4.82 Deg for CNC Milling Engraver Carving Bits

  • Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 0.5mm tip diameter, 4.82Deg, TiAlN coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock

SpeTool Carbide Chamfer End Mill V Groove Router Bit 60 Degree, 4 Flutes 1/4 inch Shank for CNC Carving and Chamfering

  • Chamfer End Mill With 60 Degree, 1/4" Shank Diameter, 2" Overall Length..
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
  • V Groove Router Bits Can Be Used in CNC, X carve, 3D carving, Router Hand And Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..
Check Stock

SpeTool Carbide Ball Nose Router Bit 2.0mm Diamter Tip (1.0mm Radius) Woodwork Metal CNC Engrave Carving Machine Tools 1/4 Shank TiAlN Coat

  • Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 2.0mm tip diameter, 3.92Deg, TiAlN coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock

SpeTool 12501 2 Flutes Carbide CNC End Mill For Aluminum (1/4 Shank, 2.5 inch Long) Router Bit Spiral Mill

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The EndMill With Flat Top, 2-Flutes, Large Chip Pocket, Easy Chip Removal..
  • For Aluminum, Non-ferrous Metal, Plastics, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Slot Machining, Side Face Machining, Hole Machining. Please Adjust the Speed, Feed and Cutting Depth According to Actual Cutting Conditions..
Check Stock