ReviewsOctave Shift

Red Panda Tensor Pedal

A full-fledged studio-grade preamplifier, EQ, and distortion generator with multi-instrument and microphone compatibility.
The Gain section controls the overall volume of the unit, the amount of gain between the two internal gain stages, and the gain of each preamp stage in five stages.
Using the new Hi/Lo switch, get ultra clean sounds without breakup when distortion is not needed or achieve a broad spectrum of overdrive, distortion, and fuzz sounds.
A -20dB pad switch on the right side of the unit tame the volume for high output microphones when in XLR input mode.
The new Shift knobs in the EQ section adjust the range of frequencies that the Treble, Middle, and Bass knobs control to give you precision control over the EQ.
The Hi-Pass section spans from 60Hz to 800Hz with a 6dB per octave slope.
Offers 100% clean signal even on acoustic guitar, silent switching to eliminate "switch-pop", and passing phantom power to condenser mics.

Features: 5-channel car amplifier, 50 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms / 100 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms / 150 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms, Class D amp technology.
Tuning Controls: front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) / Variable low-pass filter (50-5,000 Hz, 24 dB/octave) / Bandpass filter engages both.
Subwoofer channel: Variable subsonic filter (10-80 Hz, 24 dB/octave) / Variable low-pass filter (50-500 Hz, 24 dB/octave) / Variable bass boost (0-18 dB at 45 Hz).
Other Features: Optional wireless remote subwoofer level control available, Preamp inputs, Speaker-level inputs (require speaker wire to RCA adapters), Hinged magnetic cover plate conceals top-mounted controls, 7 color selectable LED logo, 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier, No onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line Fuse between the distribution block and this amplifier is.

The Fuzz on the ultimate octave is a brilliantly thick snarling beast..
Fuzz tones along with optional Octave switch. Normal or mid cut switch option..
Add the brilliant Octave Up effect to the Fuzz and you're in 'White Stripes' territory. The Octave Up adds a whole new dimension to your riffs making....
Excellent tone electric guitar effect pedal with true bypass provide transparent tone,minimize the tone loss to keep the best tone quality..
Whole aluminium-alloy housing classic stoving varnish finish, stable and strong, with small LED flash indicator shows the working state..

Rate: Controls the speed of the waveform’s motion. The pulse width of these waveforms is produced by the onboard VCO being kept in a state of flux.
Tune: Sets the fine tuning of the synth voices.
Sub: Adds an additional voice one octave down from the input signal.
Octave: Drops the entire synth sound down an additional octave.
Shape: Changes the waveform from a sawtooth to a square wave, or vice versa.

Compatible models: YTS-23 YTS-25 YTS-200AD TS-100.
The octave system (connection of the new neck octave key to the main body octave lever) should be adjusted to work properly..

JOYO Voodoo Octave guitar pedal, Take your tone an octave up and add some fuzz too! A mid-cut switch gives you control over your tone..
The Fuzz on the octave is a brilliantly thick snarling beast, add the brilliant Octave Up effect to the Fuzz and you're in 'White Stripes' territory,....
True Bypass provide transparent tone to keep the best tone quality, aluminium-alloy housing classic stoving varnish finish, stable and strong..
JOYO is over decade of brand reputation, with the most popular budget pedals, amplifiers, wireless systems, controllers, metronomes, tuners winning....
Before playing, please make sure the guitar is fully connected with the pedal. in order to make JOYO pedals work properly and avoiding unexpected....

...mote allows adjustments to bass frequencies from the control which can be mounted anywhere in the vehicle. Specifications: Class: Class D.
Total Channels: 1. Power @ 1 Ohm (ch x watts): 1 x 2400. Power @ 2 Ohms (ch x watts): 1 x 1200. Power @ 4 Ohms (ch x watts): 1 x 600. Crossover: Variable Electronic 12dB Per Octave. Variable Low Pass Crossover 12dB per Octave: 40Hz-300Hz. Tone Control/Parametric EQ: Built-in bass control. Bass Boost: 0-9dB. Subsonic Filter: 10Hz-40Hz. Phase Shift: 0-180 Degrees. Variable Voltage: .2 to 6V. Frequency Response: 10Hz-500Hz. Total Harmonic Distortion (THD): < 0.10%. Speaker Level Audio Inputs: Yes.

65 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms) | 200 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode).
Front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) | Variable low-pass filter (50-5,000 Hz, 24 dB/octave) | Bandpass filter engages both.
Variable bass boost (0-18 dB at 45 Hz) on front and rear channels.
Dimensions: 10-15/16″W x 2-1/4″H x 8-1/4″D.

Features our popular Hoof and Tone Reaper fuzz pedals in one handy enclosure with the added bonus of an old school analog octave up.
Originally released as a special limited run item back in 2010, demand was so high that we decided to reintroduce it back into our line.
Capable of creating everything from subtle octave-up overtones through crushing octave squalls that simulate exploding stacks of amps.
Each effect can be used individually as well as in series but the order of effects is preset for optimum performance.
Made with care by human hands in Akron, Ohio.