ReviewsOd Pipe

Rohn 25G Series 20' Basic Tower Kit

  • INCLUDES: (1) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *20' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

Anderson Metals 56120-0806 Brass Pipe Fitting, Adapter, 3/8' Male Pipe x 1/2' Female Pipe

  • Adapter for connecting pipes or fittings of different types.
  • Male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for connecting pipes with different ends. Please see NPT Thread - chart to determine the correct size required. Pipe Size and actual Thread OD are different. The Thread OD is larger than the Pipe Size..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

SYKRSS 2 inch Inlet Muffler Exhaust 2' to 3' Exhaust Muffler Resonator Tailpipe Tips 14.8' Length Tail Muffler with Blue Burnt Exhaust Tip Fit For Car Truck

  • Dimension: 2 inch inlet, 3 inch outlet, Overall Length: 14.8 inch. NOTE : Universal muffler fit 2" OD pipe, but Not fit 2" ID pipe. Please measure the OD of your exhaust pipe before ordering..
  • High Quality Material: SYKRSS exhaust tip built with mirror polished stainless steel & blue plating. Muffler is made of two layers of stainless steel and premium sound-absorbing cotton, which help reduce vibration and absorb sound, durable and Anti-corrosive, never Rusty. Perfectly decorate the exhaust pipe of your car..
  • 2 in 1 Design: This is a 2 inch muffler with blue burnt exhaust tip, design with thick wall straight cut and can be easily weld on the exhaust tip pipe..
  • Wide Application: Universal fits any 2.0" Outlet or 2.1" Inlet trucks car exhaust tail pipe. No instruction is included. Professional installation is highly recommended..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2" muffler, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible..
Check Stock

3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
  • Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check Stock

Portable, Progress Solar and Wind Powered Light Tower

  • Kit Includes (3) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *40' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • Features 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

Rohn 25G Series 50' Basic Tower Kit - Rohn 25G

  • INCLUDES: (4) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *50' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

Gas Flex 3/4 GAS Tubing Pipe KIT 33 Ft with 2 Fittings GasFlex Natural GAS Propane

  • FLEXIBLE ALUMINUM PIPE WITH INSIDE AND OUTSIDE PE COVER.
  • 3/4" Nominal Pipe size: 16mm ID x 20mm OD (0.625" ID x 0.787" OD).
  • CAPACITY: 220,000 BTUH FOR LPG APPLIANCES : 200,000 BTUH FOR NATURAL GAS APPLIANCES.
  • KIT arrives with the brass connectors hand tightened for ease of installation.
  • Comes with 2 fittings , the fittings are MALE NPT 3/4" both ends.
Check Stock

Gas Flex 3/4 GAS Tubing Pipe KIT 66 Ft with 2 Fittings GasFlex Natural GAS or Propane

  • FLEXIBLE ALUMINUM PIPE WITH INSIDE AND OUTSIDE PE COVER.
  • Comes with 2 fittings , the fittings are MALE 3/4" NPT thread.
  • CAPACITY: 150,000 BTUH LPG APPLIANCES, 140,000 BTUH FOR NATURAL GAS APPLIANCES.
  • KIT arrives with the brass connectors hand tightened for ease of installation.
  • 3/4" Nominal Pipe size: 16mm ID x 20mm OD (0.625" ID x 0.787" OD).
Check Stock

EVIL ENERGY 2.75 Inch 2 3/4 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Joins 2.75" OD pipe to 2.75" OD pipe. Butt joint band 2.75" exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components....
  • Exhaust coupler clamps are serviceable, durability and reusable. Aslo can be used to repair exhaust pipes. Wrap some exhaust heat tape on the exhaust....
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. No....
  • Material: 304 stainless steel band, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Note: There is a flat face and arc curved....
  • EVIL ENERGY provide stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

EVIL ENERGY V Band Clamp with Flange Male Female Stainless Steel 3.0 Inch

  • [Size] Joins 3.0" OD pipe to 3.0" OD pipe. T-Bolt thread size: M8*1.25..
  • [Advantage] V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even....
  • [Feature] Male female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation..
  • [Material] Stainless steel clamp and flanges.
  • [Application] Widely used in exhaust system, turbocharger, downpipe, muffler etc..
Check Stock

Beduan Reducer Tri Clamp Ferrule Stainless Steel 304 Sanitary Fitting 2\ Tube OD to 1-1/2\ Tube OD (Pack of 1)

  • Reducer sanitary fitting can be used to connect two pipes of different diameters that are along the same pipe axis..
  • High quality 304 stainless steel, having durable and long service life..
  • Tube OD: reducing 2" tube OD to 1.5" tube OD - (51mm to 38mm tube OD)..
  • Tri clamp size: reducing 2" Tri Clamp / Clover / Sanitary to 1.5" Tri Clamp / Clover / Sanitary - (64mm to 51mm Ferrule OD)..
  • Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access..
Check Stock