ReviewsOffice Chair Cylinder Replacement

YYS SJMJ Fix Sinking Office Chair Tools Stainless Steel Inner Threaded Pipe Support Chair Saver for Stop Sinking, Adjustable Height Office Chair Gas Lift Cylinder Saver fix kit with A Wrench

  • 【Product includes】- 2 x Metal chair sinking clamp, 2 x free hexagon wrench to tighten the screws, convenient and quick installation. The practical fixed sunken office chair fix makes it easy to adjust your seat height..
  • 【High-quality】- The office chair sink stopper is made of 304 stainless steel, which has strong load-bearing capacity and is not easy to break or crack compared to other plastic chair barrel fixation and replacement tools..
  • 【Easy to install】- It only takes a few minutes to install the office chair saver. Even if you pull the gas handle, the chair will not sink. Note: Please adjust the height of your office chair before installing the office chair clip..
  • 【Practical tools】- Office chair cylinder replacement kit can fix the sinking office chair, allowing you to concentrate on work or study. In addition, the chair sink fixing tool allows the chair to rotate smoothly, which can save the cost of buying a new chair..
  • 【Apply for】- Fixing sinking office chair are suitable for most office chairs, and the chair gas lift cylinder diameter is within 25-28mm ( 0.98-1.1 Inch)..
Check Stock

Sytopia Office Chair Base Replacement, Heavy Duty Office Chair Base 28 Inch, Chair Bottom Part(2200Lbs) Reinforced to Repair Chairs with Universal Caster and Gas Cylinder Size (Polished Steel)

  • ➤WHAT'S IN YOUR PACKAGE: 1 Set of Office Chair Base Replacement, Installation Tools, 1 Base Cap..
  • ➤SOLID BASE WITH HEAVY DUTY METAL: The office chair base is made of premium chrome and meet the Office Chair's highest industry standard. The stability and 2200 lbs load capacity of the base will ensure the safety and durability..
  • ➤AFFORDABLE & UNIVERSAL REPLACEMENT FOR MOST OFFICE CHAIRS: The office chair base with universal caster and gas cylinder size works perfectly with almost every office chair, gaming chair, desk chair, task chair and swivel chair on the market which helps with saving your budget..
  • ➤FULL SIZE DETAILS: Office Chair Base Size in Diameter: 28’’ (70 cm). Chrome Base Leg Length: 12.6’’ (32 cm). Standard Gas Cylinder Socket: 2’’ (5 cm). Standard Caster Sockets: 7/16’’ x 7/8’’ (11mm x 22mm). Height of the Chrome Base: 4’’ (10 cm).
  • ➤ CUSTOMER SATISFACTION GUARANTEED - It's easy to install by following our instrction. You can simply return it for a full refund if it doesn't fit your chair..
Check Stock

Sytopia Office Chair Base Replacement, Heavy Duty Office Chair Base 28 Inch, Chair Bottom Part(2200Lbs) Reinforced to Repair Chairs with Universal Caster and Gas Cylinder Size (Matte Black)

  • ➤WHAT'S IN YOUR PACKAGE: 1 Set of Office Chair Base Replacement, Installation Tools, 1 Base Cap..
  • ➤SOLID BASE WITH HEAVY DUTY METAL: The office chair base is made of premium chrome and meet the Office Chair's highest industry standard. The stability and 2200 lbs load capacity of the base will ensure the safety and durability..
  • ➤AFFORDABLE & UNIVERSAL REPLACEMENT FOR MOST OFFICE CHAIRS: The office chair base with universal caster and gas cylinder size works perfectly with almost every office chair, gaming chair, desk chair, task chair and swivel chair on the market which helps with saving your budget..
  • ➤FULL SIZE DETAILS: Office Chair Base Size in Diameter: 28’’ (70 cm). Chrome Base Leg Length: 12.6’’ (32 cm). Standard Gas Cylinder Socket: 2’’ (5 cm). Standard Caster Sockets: 7/16’’ x 7/8’’ (11mm x 22mm). Height of the Chrome Base: 4’’ (10 cm).
  • ➤ CUSTOMER SATISFACTION GUARANTEED - It's easy to install by following our instrction. You can simply return it for a full refund if it doesn't fit your chair..
Check Stock

PHARMEE Replacement - Heavy Duty Office Chair Tilt Control 6.7X 5.5Inch,Fixed Sunken Office Chair- for Desk Chair Computer Chair Parts

  • 【Material】Made Of 2.2mm Thickened Steel Bracket, Durable And Replaceable Chair Tilt Mechanism. It Is Important To Measure Your Mounting Hole Size Before Ordering..
  • 【Tilt Mechanism】Office Chair Replacement Parts Desk Base Mechanism Swivel Tilt Control Chair Replacement Heavy Duty Lifting Execution Hardware, Bring Maximum Load Capacity And Safety..
  • 【Easy Installation】Remove The Original Cylinder From The Wheelbase. This Seat Mount Fits Directly Into The Original Mounting Bolt Pattern. Just Screw It In Properly, Pressing The Entire Seat Down On The Cylinder..
  • 【Advanced Replacement】This Tilt Control And Swivel Caster Gives Your Chair A New Look, Stable To Use, Quick And Easy To Replace, Much Cheaper Than Replacing The Whole Chair, It Fits Like A Glove..
  • 【100% Risk-Free Shopping】 Our Goal Is To Provide You With Quality Office Chair Accessories,Office Chair Parts, And If They Don'T Meet Your Expectations Or Appear Damaged, We Offer A Free 30-Day Return/Exchange Service, Three-year warranty,Let Us Know If You Have Any Questions!.
Check Stock

Fixing Sinking Office Chair Office Chair Cylinder Replacement to Prevent Sinking Adjustable Height Office Chair Gas Lift Cylinder Saver fix kit with A Wrench

  • Apply For - Fixing Sinking Office Chair is suitable for most office chairs that the diameter of chair gas lift cylinder is within 25-28mm ( 0.98-1.1....
  • Office Chair Fix Kit - Metal chair sinking clamp comes with a free hexagon wrench to tighten the screws for quick installation. Practical fix sinking....
  • High Quality- Office chair sinking stop is made of 304 Stainless Steel material, has strong load bearing capacity, not easy to break or crack....
  • Practical Function- Office chair cylinder replacement kit can fix a sinking office chair so that you can concentrate on working or learning. Moreover,....
  • Easy To Install- Install the Office chair saver just in several minutes. The chair will not sink even if you pull the gas handle. Attention: please....
Check Stock

Gas Cylinder Heavy Duty for Herman Miller Classic Aeron Chair as Replacement

  • Listing is for a brand new never used CLASS 4, office chair seat height adjustment pneumatic gas lift cylinder. 4.5" stroke (seat travel from lowest....
  • Exceeds ANSI/BIFMA5.1-2011 standards, based on the specs of this cylinder, it's load capacity is 350 pounds..
  • Length Compressed: 11.5" Fully Extended: 16" Travel: 4.5", Cylinder Diameter: 28mm (1.1") Column Diameter: 50mm (approx 2").
  • After install, If the chair can't lift normally. Two screws located near where the cable attaches need to be adjusted, see photo 2..
  • Cylinder for Aeron Chair Size A, B and C, offer 5 years replacement warranty.Only For Aeron chair made between 1996-2012..
Check Stock

New Foam Pad Replacement for Herman Miller Classic Aeron Chair Posturefit Lumbar Graphite/Black.

  • Listing is for a brand new never used CLASS 4 WITH 400N, office chair seat height adjustment pneumatic gas lift cylinder. 6.0" stroke (seat travel....
  • Exceeds ANSI/BIFMA5.1-2011 standards, based on the specs of this cylinder, it's load capacity is 350 pounds..
  • Cylinder Diameter: 28mm (1.1") Column Diameter: 50mm (approx 2")..
  • Cylinder for Size A, B and C Aeron Chair. offer 5 years replacement warranty..
  • Only Available for Aeron chair made between 1996-2012..
Check Stock

18' to 28' Long Adjustable Gas Lift Cylinder Tube for Bar Stool Drafting Chair Replacement Parts,Heavy Duty Hydraulic Pneumatic Cylinder Shock Piston

  • Study & Heavy Duty: Certified by SGS test (USA) & Higher Standard LGA test (GER), use of high quality materials and thickened outer steel, this gas lift cylinder is of really high quality and durability, weight capacity: 450 lbs..
  • Universal size: 10 stroke cylinder piston tube,the lowest height is 17.7", the highest height is 27.7", which means this hydraulic lift has a height range of 10 inches..
  • Longer service life:These high standard office chair cylinder are more reliable and you get a free replacement for any non-human quality problem within 5 years..
  • Chair replacement parts: Suitable for bar stool ,drafting chair,high stool,smooth rise and fall, and supports 360 degrees of rotation..
  • Easy to Install: Usually you will need to use a hammer to remove the old gas lift cylinder from the chair base and replace it with a new one. (We recommend that you search for "gas lift replacement" on YouTube).
Check Stock

VILLCASE 1pc Plate Adjustable Stool Conting Tool Parts Bar Executive for Base Rotating Hardware Turntable Swivel Mount Duty Lift Heavy Desk Chair Office Tilt Mechanism Gas Control

  • Ball Bearing Turntable: Made of sturdy and iron material, it is not easy to be deformed or damaged..
  • Chair Swivel Tilt Control Base: This is an efficient and professional office chair tilt control base, which can play a good replacement and maintenance effect..
  • Gaming Chair Replacement Parts: Chair Adjustable Base-- The simple and practical iron art tilt control base can play a good adjustment effect and bring you a better experience..
  • Office Chair Cylinder Replacement: Made of sturdy and iron material, not easy to be deformed or damaged. Office Chair Mechanism.
  • Tilt Control Mechanism: 【Easy Assemble】Suitable for replacing your old base of office chair, easy to assembly, just a little minutes, done and get an updated chair..
Check Stock

Dowinx Office Replacement Cylinder,Gas Lift Cylinder Universal Size Fits Most Chair,Class 4 Hydraulic Pneumatic Piston Heavy Duty 450Lbs

  • [INDUSTRY STANDARD SIZE] Fits Most Chairs: The office chair replacement cylinder is an international standard size, suitable for most chairs, such as office chairs, gaming chairs, executive chairs, etc. Save even more money by repairing lift function by replacing gas cyliners..
  • [Premium Quality] Our heavy duty pneumatic piston is the industry's highest grade class 4. And it passed the top-level test of BIFMA and TUV certification by lifting up and down 120,000 times without fail. This replacement cylinder can be used longer..
  • [Safe and Explosion-Proof] Our hydraulic cylinder built with high-quality solid steel that can support maximum weight up to 1000 lbs. The safety decompression structure design will be more secure than most gas lift cylinder and also have the explosion-proof..
  • [Size Information] Outer Cylinder : 2 inches.
  • The height of fully expanded: 16.9 inches.
  • The adjustable height: 5.5 inches. Please confirm the measurement before ordering..
  • [One Year Free Warranty] We will provide instruction service for removing and installing cylinder replacement. And we also provide 1 year free warranty service: when the cylinder fails, leaks, sinks, we will reissue a new cylinder for free..
Check Stock

The Office Oasis Chair Cylinder Replacement with Removal Tool, Standard Size

  • ★ EASY REMOVAL & INSTALLATION - The only chair cylinder replacement on Amazon to offer a cylinder removal tool. No more struggling and spending hours trying to remove your chairs old broken cylinder with tools you don't have. We will also make sure to help guide you through the entire process from start to finish..
  • ★ SAVE MONEY. REVIVE YOUR CHAIR - Fix your sinking office chair by replacing the cylinder instead of spending money on a brand new computer chair. We'll send you the highest quality cylinder on the market, our exclusive cylinder removal tool, detailed step-by-step installation instructions, gloves, and our money-back guarantee. You have nothing to lose!.
  • ★ INDUSTRY STANDARD SIZE - This pneumatic piston cylinder will fit almost every office chair on the market including herman miller aeron. If it doesn't fit your specific chair, return it for a full refund and we'll even cover the cost of shipping for you..
  • ★ EXTRA HEAVY DUTY - Our desk chair cylinders are all Class 4, which are known as the most durable, longest lasting, & highest quality hydraulic gas lift cylinders. Cheaper options can start sinking within the first few months of use. Our's don't. They can even support up to 1000 lbs without fail..
Check Stock