ReviewsOffset Flashlight Rail Mount

UTG Angled Offset Low Profile Ring Mount for Light Devices

  • UTG New Gen Tactical Flashlight Ring with 45 Degree Offset Angle for Optimal Low Profile Center Bore Alignment.
  • Offset Angle Designed to Support Modern Shooting Techniques, Allows Clearance Of Most Front Sight Post While Mounted On a Top Picatinny Rail.
  • Light Weight, Precision Machined Aluminum with Anodized Black Matte Finish.
  • Integral Max Strength Twist-lock Mount to Fit on any Picatinny/Weaver Rail.
  • Complete with 2 Spacers to Accept 27mm, 25.4mm(1"), or 20mm Tube Light Device.
Check Stock

Fidragon Ultralight 45 Degree Offset Rail Mount 5 Slots Picatinny Weaver Rail for Flashlights Laser Red Dot Sight Optics 2 Pcs in Pack

  • This 45 degree offset rail allows the attachment of laser flashlight mounts for picatinny rail.
  • Very lightweight and great low profile!!! Black anodized matte finish for superior anti-corrosion performance.
  • Easy install!This 45 Degree Offset rail mount is fixed on position with 2 screws and can be installed in one of eight different clock positions. Holds well, and placed at both a good angle and drop point.
  • This is one perfect choice for keltec sub2000, your equipment is able to fold all the way when you put on this mount and install some sight models.
  • Perfect for canted BUIS. You’ll be all setup for the distant shot as well as the close quarters shot when putting if get your pop up sights on it and optic sight with magnification on the upper rail.
Check Stock

Weltool Tactical Offset Picatinny Rail Mount for Flashlight (MIL-STD-1913, STANAG 2324,STANAG 4694) - Offset Side 45 Degree Professional Holder for All Standard 1 inch Flashlight

  • 【1" Dia. Tube 】1 inch in diameter for use with standard 1 inch diameter tube tactical flashlights.
  • 【Multi-usage】Offset rail mount for mounting flashlights, Sight, Night Scope Tactical light Red dot diopter to rail equipped rifles.
  • 【45°Offset Side Fits Rails】Offset Side 45 Degree, Mounts to any standard Picatinny1913 rail system(STANAG 2324,STANAG 4694), with the flashlight offset to the side so it doesn't interfere with vertical grips or hand guards.
  • 【Easy and Quick Installation】 Thumb Nuts and Locking Plate.
  • 【Solid Aluminum Alloy, Matte Black Finish】Made of solid lightweight aluminum alloy to withstand shock and recoil, Matte Black Finish offer durable performance in the field..
Check Stock

ALONEFIRE Full Metal Weapon Light Mount Offset Picatinny Rail Mount for Guns Weapons Tactical Flashlight LED Torch with Quick Release and Grommet for Sports Outdoors Hunting Fishing Shooting Airsoft

  • Gun mount constructed of aluminum with a black anodized finish for long lasting performance..
  • Weapon light mount designed to be compatible with all weaver picatinny style rails..
  • Offset flashlight mount work great and come with a variety of screw sizes to accommodate various sizes flash lights..
  • Attaches and detaches quickly and easily via integrated quick release mechanism,without additional tools or tightening..
  • Offset design for easier access to tailcap switch,great for use mounting flashlight to handgun with accessory rail..
Check Stock

XLENTGEN IR Flashlight 940nm IR Illuminator Flashlight Single Mode Infrared Light Night Vision Flashlight for Hunting – Includes Pressure Switch & Offset Mount

  • No Standalone lithium batteries are sold with the product.
  • ✅【PERFECT FOR NIGHT ACTIVITIES】: The single mode IR flashlight is designed for night activities and easy to operate. Ideal for night fishing, camping, caving and night photography. Our Night Vision Infrared Torch Kits are available right out of the box, no need to buy extra batteries.
  • ✅【INVISIBLE IR LIGHT】: IR flashlights emit light with a wavelength of 940nm that the human eye cannot see directly. Therefore, the infrared light needs to be used with night vision goggles, night vision monoculars and goggles (Note: When the LED light bead emits a small and faint red light, it indicates that the flashlight is turned on.).
  • ✅【ZOOMABLE & LONG RANGE】: The infrared flashlight uses a 38mm thick optical convex lens to make the beam more concentrated. Turn the head to adjust the flashlight focal length for a wide-ranging flood beam or a spot beam up to 150 meters away.
  • ✅【HUNTING LIGHT KIT】: Equipped with a dual control pressure switch and offset rail mount, the infrared light night vision flashlight Kit can be mounted on hunting equipment fitted with a 20mm standard rail, ideal for hunting coyotes, predators or white-tailed deer, etc.
  • ✅【WORRY-FREE AFTER-SALES】: This infrared fla....
Check Stock

FAZee Offset Flashlight Mount, Suit for 1.18” and 1” Tactical Flashlights, with QD Quick Release, Compatible for 20mm Picatinny Rail Mount (2 Mounts)

  • 【Fit for 30mm & 25.4mm Flashlight Tube】Each flashlight mount enabled with circular hard gasket, effectively switch the ring diameter from 30mm/1.18 inch to 25.4mm/1 inch, perfectly meet your different size needs! --- Note: For 1 inch diameter flashlight tube, gaskets need to be installed.
  • For 1.18 inch flashlight, no gasket is required..
  • 【Rail Size Requirement】Compatible with any standard 20mm-22mm standard picatinny rails..
  • 【Ergonomic Design】Offset side 45 degree design gives easy access to switch for flashlights. --- Keeps flashlight to the side so it doesn't interfere with vertical grips or hand guards..
  • 【Solid & Durable Aluminum】Precision machining from aircraft grade aluminum alloy with black matte anodizing finish. Sturdy & durable, compact construction offer stable durable performance..
  • 【Easy to Install & Remove】Easy to mount and release via QD quick release design, come with hex wrench to mount your flashlight conveniently..
Check Stock

WINDFIRE Waterproof CREE Green Light LED Coyote Hog Hunting Light Lamp Tactical Flashlight Torch with Pressure Switch and Rail Rifle Mount for Picatinny

  • 【Green Flashlight for Hunting】tactical flashlight rifle, Cree LED green light output .Great tool for coyote hog pig varmint predator hunting. Animals are not sensitive to green light and will not be frightened. So it’s very helpful to find animals at night and observe them.
  • 【Durable/ Military Material】 Rifle light with pressure switch adopts 6061T aluminium alloy, durable and hard. 150 yards bright green hunting light and focused beam, 250 lumens unfiltered green light output. Water-resistant design, can use it in rainy day.
  • 【Two Switch Modes】Remote pressure switch/Tactical Tail Switch. Using high-quality copper circuit boards, energy efficient. 2 modes for pressure switch: press to light up, press again to switch off.
  • 【Easy to Install】Picatinny offset rail mount perfectly fits for all 20mm standard picatinny/ weaver rail, can be quickly attached or detached structure in seconds.
  • 【What you can get】1 x WF-501B Tactical green light flashlight, 1 x Picatinny rail mount, 1 x Remote pressure switch, 1 x Charger, Battery included. Please feel free contact us if you have any questions..
Check Stock

Professional Tactical Flashlight for Rifle - 1200 Lumen Matte Black LED Weapon Light with Picatinny Mount and Pressure Switch - CISNO L2

  • Matt black Tactical Flashlight - blinding brightness: A virtually indestructible, recoil-proof LED generates 1000 lumens of blinding white light and....
  • The Flashlight mian body Material: 6061T Aluminium..
  • CSINO weapon light With 2 Modes pressure switch: tactical momentary-on/constant-on..
  • Come with 20mm Quick Release O-Ring Scope Offset rail mount, fit for picatinny rail..
  • IPX7 Waterproof, Power by 1x 3.7V 18650 battery (Not included)..
Check Stock

TPO 1" Offset Picatinny 45 Degree Rail Mount for Flashlights/Scope Mount 1 Pack

  • * Insured by precision CNC machining to exacting tolerances from Made 6061-T6 aluminum.
  • * Black anodized matte finish for long lasting performance.
  • * Offset design allows easier access to flashlight tail cap button switch..
  • * Professional picatinny rail mount for flashlight/ night sight/ tactical light/ LED torch..
Check Stock

Ouesen LED Tactical Flashlights with Picatinny Mount, 1600LM Bright 5 Modes Opreated Flashlight with USB Charging Cable, Remote Pressure Switch, for Camping Biking (CREE XML-L2 LED)

  • [Blinding Brightness] - Brightness of 1600 lumens via CREE XML-L2 LED and long run-time for 6 hours, beam distance up to 300 meters. Ideal for someone who spends a lot of time in survivalist environments, or camping trips in the wilderness.
  • [5 Lighting Modes] – This flashlight kit has 5 working modes meet your all needs: High, Medium, Low beam, Strobe and SOS for emergency.With red, green and blue filters, multi-mode dimming makes it good for various lighting needs such as emergency lighting, night fishing, running, cycling, rock climbing.
  • [2 Types of Switches] - This high lumen spotlight comes with a regular button switch with rope and a momentary on pressure switch for different tactical need. The provided smart remote pressure switch is easy to Install and so on(PS: If the pressure switch does not work properly, first press the switch on the flashlight).
  • [1 Offset Picatinny Rail Mount] - Professional picatinny rail mount (MIL-STD 1913) can be quickly attached or detached structure in seconds. The allen wrench and 4 screws to mount your led flashlight conveniently are also included,will not increase weight to your equipment at all.
  • [Excellent Design] - The body was made of high quality 6061T aluminum and IP65 anti-abrasive coating which makes the fla....
Check Stock

Opvms Offset Scout Light / Optic Picatinny Rail Mount, Compatible with DBAL PEQ 15 M300 M600 Tactical Flashlight Weapons Light, Fit for Mlok / Keymod Rail

  • 【3 Slot Sections】This scout light mount with 3 slots, allowing you quickly add on any standard picatinny accessories. The allows for the direct attachment of the M300/600 series of scout lights or other MIL-STD-1913 light and optic mounts such as DBAL PEQ15..
  • 【Offset Design】 Its 45 degree offset mount design allows for more flexible hand or accessory placement without obstruction of flashlight beam..
  • 【Suitability and Package】Suitable for Mlok / Keymod Rail.Package includes screw nut set and wrench for installation.Using the included wrench, the tactical light mount can be easily installed on the rail..
  • 【Metal Material】Made of aircraft grade aluminum alloy, solid & durable, lightweight & compact, without adding too much useless weight and bulk when hunting..
  • 【Details Design】Beveled ends and corners to reduce snagging and sharp edges. Better protection for your tactical flashlights and other equipment..
Check Stock