ReviewsOil Cooler Fitting

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

Robinair 16301 Low Side Tank Adapter - 1/2 Acme Female X Low Side R-134A Male Coupler, Gold

  • Robinair's VacuMaster Economy Vacuum Pump is designed for air conditioning and refrigeration service.
  • featuring a 2-stage rotary vane design, 7.5 ounce oil capacity, and non-skid feet.
  • 1/3 HP, 115V/60 Hz thermally protected motor.
  • Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life.
  • 1/4 inch MFL & 3/8 inch ACME inlet fittings, 3/8 inch FFL x 1/2 inch Acme adapter, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining.
Check Stock

Engine Oil Cooler And Filter Housing Adapter Kit EONLION Sensor Kit Replacement Compatible With 2014-2017 Chrysler 200/300 for Dodge Journey Jeep Wrangler Ram 3.6L Aluminium Silver 68105583AF

  • This is the most up-to-date version of the Genuine Ford OEM Engine Oil Cooler. Like ALL OEM Oil cooler this oil cooler comes with OEM gaskets & the oil cooler screen. All of our coolers do have the updated extra cooling layer..
  • If your EOT & ECT have more than a 20-25 degree variation, your oil cooler is on its way out. Replace it before it becomes an issues. If you replace your defective or failing oil cooler with anything other than the OEM Updated Oil Cooler, you are asking for trouble down the road..
  • This is a new Ford factory oil cooler built by International.
  • Compatible with all 2003-2007 Ford 6.0L Powerstroke diesel trucks.
Check Stock

6.0L Powerstroke Oil Cooler Flush Kit,Blue Anodize Adapter Flush Adapter for Ford 2003 2004 2005 2006 2007 2008 2009 2010 Diesel

  • Made of by high quality aluminum and Brass,prevent high oil temperature result in costly fuel systems and engine failure.Instead of spending a high price to replace the 6.0-liter oil cooler, it is more appropriate to spend a little free time to clean it. And our products can be used repeatedly..
  • With our 6.0L Power Stroke Oil Cooler Flush Kit, the oil cooler can be backflushed in less than an hour. By directing the water flow in the opposite direction of normal travel, contaminants are removed and, in most cases, the cooler is restored to new effectiveness..
  • No need to remove the plant cooling manifold. Coolant enters the cooler from the oil cooler, and when disturbed, the quick connection hose between the oil cooler and the cooler will usually start to leak, resulting in rewinding. Our device will not interfere with the original connection..
  • It is advisable to regularly monitor the Delta T (difference between oil temperature and coolant temperature) while operating the engine under load. If the temperature difference exceeds specification we recommend performing an oil cooler flush. Careful attention to this detail can prevent thousands of dollars of engine and fuel system damage. In the case of a cooling system that has experienced extreme neglec....
Check Stock

Derale 13950 Atomic-Cool Remote Cooler , Black

  • Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function:keep oil temperature low, help to improve the lubricating effect of engine oil, prevent parts damage ,or even seizure of the engine.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
  • Size:10AN 30Row oil cooler,oil capacity:0.74L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
  • Package Include:1pc 30row engine oil cooler.2pcs 10an female to 8an male fittings,2pcs 10an female to 6an male fittings.Can be used to connect 8AN / 6AN braided fuel line hose ends..
Check Stock

Transmission Torque Converter Oil Cooler Compatible with 2003-2009 Auto Heat Exchanger Base for Dodge Ram 2500 3500 Cummins Diesel 5.9L 6.7L Replaces OEM 68004317AA 5086946AA 5086946AB 4930582

  • TORQUE CONVERTER OIL COOLER - New replacement torque converter oil cooler for Cummins transmission torque converter cooler compatibility with....
  • HIGHLY PERFORMANCE - Replace a new oil cooler transmission can reduce the oil temperature, reduces oil consumption. Customers can find the....
  • FUNCTIONS - The transmission oil cooler is an essential component of every vehicle, helps the transmission stay cool, even when working harder than....
  • SYMPTOMS OF A FAILED TRANSMISSION OIL COOLER - The proper functioning of it is necessary for a healthy vehicle, and if it is worn, you could be in big....
  • KINDLY REMINDER - Kindly please refer to part number and fitment chart carefully before place order to avoid buying wrong. High quality OEM....
Check Stock

Engine Oil Cooler Kit - Compatible with Ford Trucks - Powerstroke 6.0L V8 F250, F-350, F450, F550 Super Duty, Excursion, E350, E-450 - Replaces Part 904-228, OCK388, 3C3Z 6A642 CA - Gasket Seal Kit

  • Replacement Engine Oil Cooler With Gasket Seals & O-Rings - Is a heat-exchanger which is commonly a radiator type of cooler which cools engine oil from the engine. It removes excess heat from the oil using the engine coolant that flows around as the engine oil passes through the cooler. The engine oil cooler can be located under the intake above the engine..
  • Compatible Replacement for Ford Vehicles - 2004 - 2005 E-350 Club Wagon | 2004 - 2010 E-350 Super Duty | 2004 - 2007 E-450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F-250 Super Duty | 2003 - 2007 F-350 Super Duty | 2003 - 2007 F-450 Super Duty | 2003 - 2007 F-550 Super Duty |..
  • Replaces Part# 3C3Z 6A642 CA, 904228, 904-228, 015339, OCK388, 3C3Z-6A642-CA, 3C3Z6A642CA - If you are noticing engine oil in your coolant system, oil or coolant leaking from the oil cooler or engine coolant mixed with your engine oil then your oil cooler might need to be looked at or replaced. This engine oil cooler kit also includes viton gasket seals needed for the proper service on your vehicle..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and it will fit and work exactly like the factory part. This part is commonly found on popular Powerstroke 6.0 V8 models....
Check Stock

Transmission Cooler LPD47391 Trans Cooler 40,000 GVW Transmission Cooler Kit with Mounting Hardware Transmission Oil Cooler With Cooler Hose

  • 1.[ Transmission Cooler That Provides The Best Protection for Cars ]: When your vehicle needs an auxiliary transmission oil cooler, it can provide you with the best protection. The trans cooler can be used to cool the engine crankcase, clutch, valve assembly, etc. It is an essential tool for heavy-duty applications..
  • 2.[ Highly Compatible Trans Cooler ]: The transmission cooler kit is suitable for advanced cooling protection and traction applications of cars, vans, light trucks, R.V. below 40,000GVW..
  • 3.[ Part Number For Transmission Oil Cooler ]: LPD47391.
  • 4.[ Transmission Performance Oil Cooler Made of High-quality Materials ]: This transmission cooler is made of high-quality materials. The brazed aluminum structure is characterized by its high temperature resistance, corrosion resistance and long service life. The improved fin spacing is more precise, which can achieve efficient airflow and cooling..
  • 5.[ Transmission Cooler Kit With Complete Accessories ]: This kit includes transmission cooler, bolts, nuts, washers and steel mounting straps, brass fittings, high-quality cooler hoses and hose clamps..
Check Stock

DEWALT DXCMV5048055 Two-Stage Cast Iron Industrial Air Compressor, 80-Gallon

  • The DEWALT 2 stage air compressor is built with a 5-HP TOPS motor to provide long life and quiet operation, Air Compressor Voltage: 230.
  • The integrated control panel has a tank and pressure gauge and 2 quick-connects for convenient control, Air Delivery SCFM @ 175PSI (CFM): 17.
  • This compressor delivers plenty of air to run multiple tools at the same time to get the job done faster, Air Delivery SCFM @ 100PSI (CFM): 17.9.
  • The thermal overload protection system motor protects the motor from voltage fluctuations, Nozzle Fitting Size: 3/4-in, Horsepower: 5.
  • This air compressor comes from the factory with synthetic blended oil already installed, Height (Inches): 80, Length (Inches): 31.5, Width (Inches): 34.7.
  • Built to perform with a patented pump design that provides longer life by running cooler, Pump Type: Oil-lubricated.
Check Stock

EVIL ENERGY 10 Row AN10 Oil Cooler Kit Universal 10AN Engine Transmission Aluminium Alloy Black

  • Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function:keep low oil temperature, help to improve the lubricating effect of engine oil, prevent parts damage and prolong engine life.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
  • Size:10AN 10Row oil cooler,Oil Capacity:0.24L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
  • EVIL ENERGY provide this product have 3-month warranty. Any problem you might have ,please feel free to contact us via Amazon message..
Check Stock

EVIL ENERGY 15 Row AN10-10AN Oil Cooler Kit Universal Engine Transmission Aluminium Alloy Black

  • Universal: universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location: choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function: keep low oil temperature, help to improve the lubricating effect of engine oil, prevent parts damage and prolong engine life.This stacked-plate oil cooler can be used to cool down engine,transmission, and rear-differentials..
  • Size: 10AN 15Row oil cooler,Oil Capacity:0.8L.Test Pressure: 116psi,Burst Pressure:232psi.Material:aluminium alloy..
  • Please measure before purchase.EVIL ENERGY provide this product have 3-month warranty. Any problem you might have ,please feel free to contact us via Amazon message..
Check Stock