ReviewsOil Cooler Hose Fitting

Vinco s - OsteoSheath4 - 120 Tablets by Vinco

Package Including: 20 Ft Braided Fuel/Oil/Gas Line Kit(10pcs 6AN hose fitting + 20Ft AN6 Stainless Steel Oil line).
Universal Application: The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas....
Hose Material: Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
The fitting is made of T6061 Aluminum,high strength and good durability..
Working Temperature: -40 F to +248 F. Working Pressure:500 PSI.
Excellently Sealed,100% no leaking .Exchange or return if leak..

Check Stock

3Ft 6AN 3/8" Fuel Line Hose Braided Stainless Steel W/2pcs AN6 Hose Fitting Kit Blue & Red Universal for Racing Fuel, Gas, Coolant etc

Stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas ,vacuum, hydraulic fluid, lube, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line..
Braided Steel Fuel Line Maximum Working Pressure (psi): 1000 psi. Bursting Pressure(psi): 6000psi. Working Temperature Range: -40℉ to 257℉(-40℃ to 125℃). Please make sure the pressure and temperature range is suitable for your application before purchase..
Include a universal 3Ft fuel hose and 2pcs swivel hose ends.
Inner Diameter: AN-6 (3/8") - Outer Diameter: AN-9 (9/16").
Double stainless steel braid cover for excellent flexibility and resistance to abrasion. This hose is perfect for extreme environments where there is extra heat or where chaffing might occur..
Professional installation is highly recommended. Warranty: CarBole offers 3-month warranty for the steel braided hose..

Check Stock

Mophorn 8AN Fuel Line, 20 Pcs 8AN Fuel Hose Kit, 32.8Ft BK Nylon Stainless Steel Braided Oil Line Hose, NBR CPE Synthetic Rubber AN8 Gas Line, 8AN Universal Fitting Adapter Set with Aluminum Hose End

... to 350℉. It is compatible with nearly every substance or agent used. Oil fuel line length: 10 m/ 32.8 ft..
20 Pics Hose End Kit: Each nylon and stainless steel braided oil fuel line kit included 20pcs 8an hose ends (8pcs straight, 4pcs 45 degrees, 4pcs 90 degrees, 4pcs 180 degrees) and 32.8ft braided fuel line. Fitting professionally to manifest its best performance..
Suit for Various Uses: Fuel line widely used in the fuel system, transmission system, cooler system, and pump. It can be worked with racing fuel, pump gas, fuels with ethanol, alcohol-based fuels, motor oil & coolant, etc..

Check Stock

Medoon 10ft 10AN Black Nylon And Stainless Steel Braided Fuel Oil Hose Fuel Line 10pcs 10AN Hose Fitting Kit 6pcs 10AN Hose Separator Clamp 2pcs 10AN to 10AN Male Coupler Adapter Straight Fitting

100% QUALITY MATERIAL:Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
The fitting made of T6061 Aluminum,high strength and good durability.The material of union adapter is lightweight aluminum..
EFFECTIVELY:The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas or antifreeze.10an hose separator clamp is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on..
USEFUL:Inner core CPE has excellent corrosion resistance. It is maintenance free and precision engineered to increase life.Working Temperature: -40 F to 257 F(-40°C to +125°C) under most operating. Working Pressure:500 PSI.
Package Including:10pcs 10AN hose fitting + 10Ft AN10 Stainless Steel Oil line + 6pcs 10AN Hose Separator Clamp + 2pcs 10AN male coupler.
100% SATISFACTION:If you are not satisfied with our fuel oil hose end fitting kit,please conntect us,we will try our best to solve your problem..

Check Stock

Brass Barb Reducer Fittings LIONMAX 1 to 3/4 Barb Hose ID Hose Barb Splicer Mender with 4 Hose Clamps for Air/Water/Fuel 2 PCS

【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..

Check Stock

6.0L Powerstroke Oil Cooler Flush Kit,Blue Anodize Adapter Flush Adapter for Ford 2003 2004 2005 2006 2007 2008 2009 2010 Diesel

Made of by high quality aluminum and Brass,prevent high oil temperature result in costly fuel systems and engine failure.Instead of spending a high price to replace the 6.0-liter oil cooler, it is more appropriate to spend a little free time to clean it. And our products can be used repeatedly..
With our 6.0L Power Stroke Oil Cooler Flush Kit, the oil cooler can be backflushed in less than an hour. By directing the water flow in the opposite direction of normal travel, contaminants are removed and, in most cases, the cooler is restored to new effectiveness..
No need to remove the plant cooling manifold. Coolant enters the cooler from the oil cooler, and when disturbed, the quick connection hose between the oil cooler and the cooler will usually start to leak, resulting in rewinding. Our device will not interfere with the original connection..
It is advisable to regularly monitor the Delta T (difference between oil temperature and coolant temperature) while operating the engine under load. If the temperature difference exceeds specification we recommend performing an oil cooler flush. Careful attention to this detail can prevent thousands of dollars of engine and fuel system damage. In the case of a cooling system that has experienced extreme neglec....

Check Stock

Brass Barb T Fittings LIONMAX 3 Way Union Barb Tee Fitting 3/16 x 3/16 x 3/16 ID Hose Barb 3 PCS for Water/Fuel/Air

【SOLID BRASS MATERIAL】3/16'' × 3/16'' × 3/16'' ID Hose barb tee fitting is made of brass. Strong and durable, not easy to rust and corrode. NOTE: Brass barb tee fitting is not suitable for potable water..
【-65~250°F 150PSI】Brass barb 3 way union fitting has strong temperature resistance and good pressure resistance. So barb T fitting is often used for water, fuel, oil delivery..
【SPECIFICATION】3/16'' ID Hose barb tee fitting is suitable for 3/16 inch ID hose. The package contains brass barb tee 3 PCS..
【WIDE APPLICATION】Barb tee is suitable for pipe repair. Various hoses can be connected to this 3/16 inch ID hose barb tee fitting. Meet your multiple needs..
【TIGHT CONNECTION】This hose barbed T fitting is smooth overall without burrs. Size meets the standard. The strong barb make the 3 way union fitting not easy to leak during the connection process..

Check Stock

Transmission Cooler LPD47391 Trans Cooler 40,000 GVW Transmission Cooler Kit with Mounting Hardware Transmission Oil Cooler With Cooler Hose

1.[ Transmission Cooler That Provides The Best Protection for Cars ]: When your vehicle needs an auxiliary transmission oil cooler, it can provide you with the best protection. The trans cooler can be used to cool the engine crankcase, clutch, valve assembly, etc. It is an essential tool for heavy-duty applications..
2.[ Highly Compatible Trans Cooler ]: The transmission cooler kit is suitable for advanced cooling protection and traction applications of cars, vans, light trucks, R.V. below 40,000GVW..
3.[ Part Number For Transmission Oil Cooler ]: LPD47391.
4.[ Transmission Performance Oil Cooler Made of High-quality Materials ]: This transmission cooler is made of high-quality materials. The brazed aluminum structure is characterized by its high temperature resistance, corrosion resistance and long service life. The improved fin spacing is more precise, which can achieve efficient airflow and cooling..
5.[ Transmission Cooler Kit With Complete Accessories ]: This kit includes transmission cooler, bolts, nuts, washers and steel mounting straps, brass fittings, high-quality cooler hoses and hose clamps..

Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

...line. All the an fittings feature a reusable spin-lock connector.
Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
No Worry To Buy: Excellently Sealed, no leaking. We offer 3-month after-sale service for the 6an 3/8 fuel hose fittings kit. Any problem you have, contact us directly by amazon message. Please Noted: Professional installation and....

Check Stock

JoyTube 5 Pcs Hose Barb Fittings 3/8 Barb to 1/2 NPT Male Thread Brass Metals Adapter Connector with Hose Clamp

Brass barbed hose fitting is for connecting 3/8" barb hoses, NPT male end used to connect 1/2" NPT female pipes fitting..
Made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, low magnetic permeability, ductility at high temperatures, which can withstand up to -40 to +160 degrees F..
When used with a hose clamp or crimp sleeve or ferrule, the hose barb fitting can creates a better tight seal..
Brass barbed fitting kits can be used with PVC, PU, Rubber hose or tubing, Which can apply to water, gas, oil and fuel as well as air tools..

Check Stock

YuanTenhwy 3 PCS 3/8 10mm Brass Hose Barb Tee Fittings With 9 PCS Stainless Steel Clamps For Air/Water Hose Splicer 3-Way-T…

【Size】: The outer diameter of Hose barb fitting is 3/8 inch (10mm).
【Packing list】: 3 PCS of 3-way(Type T) Hose barbs fitting with 9 PCS of stainless steel hose clamp.
【Material】: The hose barbs fitting is made of brass, and the hose clamp is made of stainless steel.
【Features】: corrosion resistance, dimensions in line with standards, and overall smooth without burrs.
The solid barb and hose clamp ensure that the hose and the Hose barb fittings are well sealed during connection, and are not easy to leak.
【Application Scenarios】：It is applicable to pipeline installation and maintenance, and is often used to assist in the transportation of gas, water or oil. However, federal laws do not allow the installation of these fittings for drinking water in the United States and its territories..

Check Stock