ReviewsOil Drain Plug Socket

10Pcs M16 Oil Drain Plug Gasket Crush Washer Fit for Subaru Outback Legacy Impreza Forester BRZ XV Crosstrek Replaces 803916010

  • This Oil Drain Plug Crush Washer Gasket Seal Rings is fit for Subaru Outback Legacy Impreza Forester BRZ XV Crosstrek..
  • Direct replacement for the part# 803916010, package including 10 pcs washers..
  • O.D.(outside diameter): 21 mm / 0.83 inch, I.D.(inside diameter): 16 mm / 0.63 inch , Thickness: 2.5 mm / 0.1 inch.
  • This 16 mm / 0.63 inch oil drain plug gaskets crush washers is needed for every oil change, it helps to seal the drain plug and oil pan surfaces..
  • Package: 10pcs oil drain crush washers. What you will get is exactly as pictures shows, pls check size information carefully before ordering..
Check Stock

Dorman 095-156CD Aluminum With Rubber Coating Drain Plug Gasket, Fits M12 Compatible with Select Lexus / Scion / Toyota Models, 2 Pack

  • Abundant oil plug washer set: you will receive 48 pieces of oil drain plug washers, designed in blue, sufficient for your long-term using needs in daily life, you can also share some of them with your families or friends, bringing them lots of convenience.
  • Reliable workmanship: these crush washers for oil plugs are made of quality aluminum, compact and sturdy, not easy to wear or deform, having nice rust prevention performance, which can well replace your worn-out gaskets, providing you with a satisfied using experience.
  • Appropriate size: the outer diameter of the oil pan drain plug gasket is approx. 0.82 inch and its inner diameter is approx. 0.47 inch, besides, it is approx. 0.07 inch in thickness, which is suitable for many kinds of cars.
  • Convenient to apply: these oil drain bolt gaskets are convenient for you to install, you can easily install them on your drain plugs by hand, not occupying too much energy and time, which can reduce the risk of oil spilling.
  • A variety of applications: these drain plug washers can be applied to many kinds of automobiles, specifically, they are compatible with most types of cars of Toyota, such as Prius, Tundra, Sienna, Highlanda, Lexus, Avaron, Camry, Tacoma, 4Runner, RAV4, Scion TC, FJ, and Cruiser, improving yo....
Check Stock

Tyfrozn (20Pcs) Oil Drain Plug Gaskets fit for Toyota Lexus Scion Crush Washer Seals Replaces# 9043012031

  • NO TOOLS, NO MESS, FAST DRAIN. Quit searching for that misplaced socket or ratchet. Eliminate stripped oil pans. No more mopping up messes. Drain oil in 10 minutes or less with the Quick Twist Oil Valve from ValvoMax. Follow an EASY 3-step process: remove cap, insert drain tool, watch the oil drain! It's so easy, anyone could do it..
  • 100% STAINLESS CONSTRUCTION. Constructed of ROCK SOLID 304 Stainless Steel, the valve is sure to outlast any vehicle. Includes a STEEL CAP with a rubber seal inside for added protection against leaks. Nothing comes close to the durability offered. Material you can TRUST!.
  • WAVE SPRING TECHNOLOGY. SAVE TIME with FAST oil changes. By using a proprietary wave spring, the oil is able to travel quickly! Use a ValvoMax Drain Bag (sold separately) for added convenience of disposal. Get back to doing what matters most..
  • DRAIN OIL WITH EASE. Includes EZ Drain Tool with ergonomic hand grip for easy oil changing. The actuator pushes upward on a steel ball to release the flow of oil. Oil drains through the attached tube into your container! A simple twist of the wrist begins oil flowing. Drain oil HOT for faster changes..
  • ONE-TIME INSTALLATION. Install it once and forget about it. Discover the EASE of simpler oil changes and make messes ....
Check Stock

X AUTOHAUX 15pcs M20 Silver Tone Oil Drain Plug Gasket Replacement for Subaru 11126AA000

  • NO TOOLS, NO MESS, FAST DRAIN. Quit searching for that misplaced socket or ratchet. Eliminate stripped oil pans. No more mopping up messes. Drain oil in 10 minutes or less with the Quick Twist Oil Valve from ValvoMax. Follow an EASY 3-step process: remove cap, insert drain tool, watch the oil drain! It's so easy, anyone could do it..
  • 100% STAINLESS CONSTRUCTION. Constructed of ROCK SOLID 304 Stainless Steel, the valve is sure to outlast any vehicle. Includes a STEEL CAP with a rubber seal inside for added protection against leaks. Nothing comes close to the durability offered. Material you can TRUST!.
  • WAVE SPRING TECHNOLOGY. SAVE TIME with FAST oil changes. By using a proprietary wave spring, the oil is able to travel quickly! Use a ValvoMax Drain Bag (sold separately) for added convenience of disposal. Get back to doing what matters most..
  • DRAIN OIL WITH EASE. Includes EZ Drain Tool with ergonomic hand grip for easy oil changing. The actuator pushes upward on a steel ball to release the flow of oil. Oil drains through the attached tube into your container! A simple twist of the wrist begins oil flowing. Drain oil HOT for faster changes..
  • ONE-TIME INSTALLATION. Install it once and forget about it. Discover the EASE of simpler oil changes and make messes ....
Check Stock

VIVOHOME 5000W 20.7 Qt Electric Deep Fryer with 2 x 6.35 QT Removable Baskets and Temperature Limiter for Commercial and Home Use

  • ...il from splattering or spilling everywhere.
  • An installed guard plate effectively balances oil temperatures and ensures food is fried evenly.
  • The anti-slip feet ensure stability and reduce sliding during operation.
  • NOTE - To avoid sudden power failure, it is recommended that the fryer should be plugged in a wall socket rather than a wiring plate type socket and the two plugs are not allowed to plug in the same socket plate.
Check Stock

ValvoMax Oil Drain Valve - No Tools, No Mess, Fast Drain - for M16-1.50 - Stainless Drain Hose Attachment

  • PREMIUM QUALITY - Our Votex drain plugs are MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plug is an aluminum crush washer.
  • HIGH TEMPERATURE NEODYMIUM MAGNET – Our plug uses a rare earth high strength neodymium magnet, rated specifically to function in high temperature environments extracting unwanted ferrous particles from your vehicles engine. Neodymium magnets are one of the strongest magnets available on the planet, giving the strength to hold weights over 2.2lbs. This empowers our plug with enormous strength to effectively pull these unwanted metals out of your motor oil resulting in longer engine life..
  • PREMIUM STAINLESS STEEL – The drain plug market has a plethora of options which are constructed of aluminum. Aluminum is an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. Our goal is to provide plugs of th....
Check Stock

Votex - M14 x 1.5MM Stainless Steel Engine Magnetic Oil Drain Plug with Neodymium Magnet - Made In USA - Part Number DP001

  • IMPORTANT: Use confirm fitment at top of page to make sure this is the correct plug for your vehicle. - EASY TO INSTALL - Our plug will install in place of your current drain plug. It will arrive with an aluminum crush washer which is recommend to be replaced with every oil change. Simply wipe the magnet clean of debris during oil change. USES 17MM WRENCH. FOR REPLACEMENT WASHERS SEARCH PART # B07ZQP2M94.
  • PREMIUM QUALITY - Our Votex drain plugs are MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plug is an aluminum crush washer..
  • HIGH TEMPERATURE NEODYMIUM MAGNET – Our plug uses a rare earth high strength neodymium magnet, rated specifically to function in high temperature environments extracting unwanted ferrous particles from your vehicles engine. Neodymium magnets are one of the strongest magnets available on the planet, giving the strength to hold weights over 2.2lbs. This empowers our plug with eno....
Check Stock

Votex - M16 X 1.5 MM Stainless Steel Engine Magnetic Oil Drain Plug with Neodymium Magnet - Made In USA - Part Number DP009

  • PREMIUM QUALITY - Our Votex drain plugs are MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plug is an aluminum crush washer.
  • HIGH TEMPERATURE NEODYMIUM MAGNET – Our plug uses a rare earth high strength neodymium magnet, rated specifically to function in high temperature environments extracting unwanted ferrous particles from your vehicles engine. Neodymium magnets are one of the strongest magnets available on the planet, giving the strength to hold weights over 2.2lbs. This empowers our plug with enormous strength to effectively pull these unwanted metals out of your motor oil resulting in longer engine life..
  • PREMIUM 304 STAINLESS STEEL – The drain plug market has a plethora of options which are constructed of aluminum. Aluminum is an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. Our goal is to provide plugs o....
Check Stock

12 Pack M16 Engine Oil Drain Plug Sealing Washers/Crush Gaskets 803916010 Fit Replacement for Subaru Outback Crosstrek Forester WRX BRZ Impreza Engine Oil Seals Rings Silver

  • Made to specific sizes and standards to ensure a proper fit/Designed and constructed to strict engineering quality standards.
  • Direct replacement gaskets and some universal gaskets available. Proper fit with the drain plug ensures a tight seal.
  • Easy to install, save your money. Leak free, great value for 12 pack. Spec: ID 16mm/ OD 21mm/ Thickness 2.5 mm.
  • This 16 mm / 0.63 inch oil drain plug gaskets crush washers is needed for every oil change, it helps to seal the drain plug and oil pan surfaces.
  • This oil drain plug gaskets crush washers is for Subaru Outback Legacy Impreza Forester BRZ XV Crosstrek, see more vehicle details in the description part.
Check Stock

Eapmic 12 Liter Dual Tanks Commercial Stainless Steel Deep Fryer High Capacity Professional Gas Countertop Kitchen Frying Machine for French Fry Restaurants Supermarkets Fast Food Stands

  • ...il from splattering or spilling everywhere.
  • An installed guard plate effectively balances oil temperatures and ensures food is fried evenly.
  • The anti-slip feet ensure stability and reduce sliding during operation.
  • NOTE - To avoid sudden power failure, it is recommended that the fryer should be plugged in a wall socket rather than a wiring plate type socket and the two plugs are not allowed to plug in the same socket plate.
Check Stock

UTSAUTO 90471-PX4-000 Transmission Fluid Drain Plug Crush Washer Oil Crush Washers/Drain Plug Gaskets Replacement for Honda Accord Acura Civic Ridgeline Odyssey CRV CR-V Pilot Fit Element (25Pcs)

  • PERFECT REPLACEMENT: UTSAUTO oil crush washers / drain plug gaskets are a perfect replacement for Honda OEM washer / gasket. Ideal for oil changes and oil filter replacements.
  • High Quality: Our oil drain plug gaskets are made with high quality materials, design and produced by the original washers ,can directly fits your cars.
  • Part Number: 90471-PX4-000, 90471PX4000.Size: Outside Diameter: 25.5 mm / 1 inch, Inside diameter: 18 mm / 0.71 inch..
  • This is the rear differential fill and drain plug gaskets for Honda Accord Acura Civic Ridgeline Odyssey CRV CR-V Pilot Fit Elemen.
  • Package Include:25pcs 90471-PX4-000 Transmission Fluid Drain Plug Crush Washer.
Check Stock