ReviewsOil Filter Cutter 14 Inches

HOODELL 4 Pack 52 050 02-S Oil Filter Fits Kohler Engine, Professional 52 050 02 5205002S 52 050 02-S1 Oil Filter, Extra Capacity Lawn Mower Oil Filter

  • Pro Parts: Professional and reliable oil filter capture fine particles down to 27 micron. Exactly for Cub Cadet LT1045, Husqvarna Craftsman Kohler 52-050-02-S KH-52-050-02 KH-52-050-02-S 25 050 25 S 5205002-S 25 050 27 oil filter..
  • Perfect Fit: Premium oil filter for Kohler SV600 SV610 SV620 SV730 SV830, MV18 MV20, KT17 KT19, CH11 CH13 CH14 CH730 CH740, CV11 CV16S CV20S CV490 CV730 CV740 LV560 engine lawn mower tractor oil filter..
  • Extra Capacity: Much higher than other shorter oil filters, almost twice the volume, filter area and cooling time. Effectively prevent damaging against harmful debris, keep oil clean and lubricate well, extend working life..
  • Well Made: Factory oil filter, select high-quality materials, thick and sturdy case, good seal without leaks, provide reliable protection. The same performance as OEM parts but far less costly. 4 pack oil filters for back up is a good deal..
  • What You Get: 4 pack oil filters, our friendly and prompt customer service. [ Size: height 3-1/8.
Check Stock

Caldera Oil Filter Wrench For 1.8Liter Toyota, Lexus, and Scion Vehicles - Compatible with 64mm Oil Filter Cartridges and Caps On Corolla, Prius, Matrix, CT200h, iQ, and XD

  • This 64mm oil filter wrench fits Toyota, Lexus, and Scion vehicles with 1.8 liter engines and cartridge style oil filters.
  • Compatible with Toyota Corolla, Prius, Prius V, Matrix, Scion iQ, xD, and the Lexus CT200h.
  • Crafted from high strength aluminum, this oil filter wrench is designed to withstand high amounts of torque when removing tough oil filter caps.
  • The 14 flute design of this oil filter tool ensures a tight no-play, non-slip grip on 64mm Toyota, Lexus, and Scion oil filter housings.
  • The 1.8 liter oil filter wrench can be used with both a 3/8 inch drive ratchet and a 27mm socket. Use 3/8 inch drive for tightening, and 27mm socket for loosening.
Check Stock

Engine Oil Cooler Filter Housing Kit with Gaskets, Cap & Seals - Replaces 55566784, 88179-91400 - Compatible with Buick & Chevy 1.4L Vehicles - Encore, Cruze, Cruze Limited, Sonic, Trax

  • Replacement Engine Oil Cooler & Filter Housing Assembly - With Gaskets, Cap & ACM Seals - Keeps the engine oil clean and cool as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation. If you are experiencing oil leaks above the transmission or near the cooler housing where the oil filter is then you may have a problem with your oil cooler and filter housing..
  • Compatible Replacement for Buick & Chevrolet Vehicles with 1.4L L4 Engine - 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Encore | 2011-2015 Cruze | 2016 Cruze Limited | 2012-2018 Sonic | 2013-2021 Trax |. The oil filter housing can easily be located above the engine and can be accessed by removing the intake manifold..
  • Replaces Part# 55566784, 918-428, 650039, 88179-91400, 55593189, 55594651, 55565385, 55565388 usually found on popular Encore, Cruze, Cruze Limited, Sonic Trax including year models 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21. It is best and practical to replace the whole housing rather than waste time trying to find where the leak is as it can be from the cracks on the housing or seals..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM....
Check Stock

OEMTOOLS 25323 10” Master Oil Filter Locking Pliers, Universal Fit, Locking Grip, Heavy Duty Adjustable Wrench for Easy Oil Filter Removal

  • Adjustable Oil Filter Removal Tool: Jaw capacity to fit spin-on filters between 2 1/8 Inches to 4 1/2 inches or 55-120 millimeters.
  • Intelligently Designed: The design of locking pliers secures its grip on the oil filter, so you can focus entirely on applying pressure and torque to remove the filter.
  • Secure Grip: The machined jaw teeth of the locking pliers provide a sure grip and easy removal without damaging filters.
  • Unlock mechanism makes it easy to disengage.
  • Precise Application: Adjust and lock in the grip of the pliers to remove any margin for error during the oil filter removal process.
  • Built to Last: This heavy-duty oil filter adjustable wrench is made of high-quality steel.
Check Stock

VEVOR Mobile Fryer Filter 44LB. Capacity Oil Filtration System 300W Fryer Filter Frying Oil Filtering System 110v/60Hz (Oil Capacity 22L/5.8 Gallon)

  • 【Large capacity】The item features a large oil capacity: 22L (5.8 gallon).
  • item dimension：450 x 330 x 350mm / 19" x 14" x 14.5".
  • 【High quality Material】The oil hose is made of silica gel, stainless steel mesh, Teflon three-layer material. The Humanized anti-scalding handle is made of polymer material, The food grade 304 stainless steel body, anti-scalding handle and food grade silicone gasket, to ensure the excellent quality of the machine. Good thermal insulation and corrosion resistance, ensure you can easily enjoy a variety of cuisine..
  • 【Thermostatic controls】the Mobile Fryer Filter also has an advanced oil temperature Heating system which provide the ideal frying temper ature to help seal the food's exterior for minimal oil absorption and healthier fried food. Allows you to adjust temperatures between 248℉-356℉ (120°c - 180°c), for perfect frying results..
  • 【Upgrade fryer filter】1. 5M tube length and swivel Joint design to prevent hose twisting, compatible with various small fryers. Overload, circuit breakers, fuses, triple protection to ensure the safety of machines and operators. Aviation outlet design, easy to store, mounted on 4 (2 locking) s....
Check Stock

THIKPO 3/8 inch 64mm 14 Flute Oil Filter Wrench for 2.5-5.7L Engines with Toyota's Cartridge Style Oil Filter System, Oil Filter Cap Removal Socket Tool for Toyota, Lexus, Scion

  • This 3/8" 64mm 14 flute Toyota oil filter cap removal tool is made of premimum 6065 aluminum alloy, which make it tough enough to provide great power to rotate and replace the extremely tight original oil filter cap..
  • Surface of the oil filter wrench is treated with a high quality black anodized finish to prevent corrosion. It greatly increases friction and durability of the tool, and will highly extend the serves life..
  • This THIKPO oil filter wrench is used for vehicles that use 15620-31060, 15620-36010, 15620-36020 oil filter housing cap and 04152-YZZA1, 04152-YZZA4, and 04152-YZZA5 Toyota oil filter system, including the new 2GRFKS 3.5L Tacoma and 8AR-FTS 2.0L in the NX200t and RC200t..
  • The oil filter cap removal tool perfect fit most of vehicles equipped with 2.5L to 5.7L engines, such as Toyota, Lexus , Scion RAV4, Camry, Tundra, Highlander, Sienna, 4Runner, Avalon, Tacoma, IS250, RX350and others which use Toyota's cartridge style oil filter system..
  • WARRANTY from THIKPO - This is NOT a genuine part, it's a aftermarket replacement part. Please feel free to contact us if you have any questions about our products or serves, we will try the best to help you..
Check Stock

Engine Oil Cooler and Filter Housing Adapter Kit - Replaces 68105583AF, 68105583AE - Compatible with Chrysler, Dodge & Jeep 3.6L V6 Vehicles - 200, Town & Country, Grand Caravan, Wrangler, Ram

  • Replacement Engine Oil Cooler & Filter Housing Adapter Kit - With Intake Manifold Plenum Gasket Set - Keeps the engine oil clean as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation. If you are experiencing oil leaks above the transmission or near the cooler housing where the oil filter is then you may have a problem with your oil filter housing adapter..
  • Compatible Replacement for Dodge, Chrysler & Jeep Vehicles With 3.6L Pentastar V6 Engine - 2014 - 2017 200 | 2014 - 2017 300 | 2014 - 2016 Town & Country | 2014 Avenger | 2014 - 2017 Challenger | 2014 - 2017 Charger | 2014 - 2015 Durango | 2014 - 2016 Grand Caravan | 2014 - 2016 Cherokee 3.2L | 2014 - 2015 Grand Cherokee | 2014 - 2017 Ram 1500 | & more. See below for full vehicle list..
  • Replaces Part# 68105583AF, 68105583AE, 68105583AA, 68105583AB, 68105583AC, 68105583AD usually found on popular , Journey, Wrangler, Ram Promaster 1500, 2500, 3500 including year models 14, 15, 16, 17. The oil filter housing can easily be located above the engine and can be accessed by removing the intake manifold. It is best and practical to replace the whole housing rather than waste time....
Check Stock

FRAM HM3600 High Mileage Oil Filter

  • VEHICLE APPLICATIONS: 2002-2008 Dodge 3.7L.
  • 1994-2009 Ford Edge/Mustang (3.5L, 3.8L, 3.9L).
  • 1997-2008 Ford F150/F250 (4.2L, 4.6L, 5.4L).
  • 1986-2007 Ford Taurus (3.0L, 3.2L, 3.4L, 3.5L, 3.8L).
  • CONSTRUCTION: The Castrol oil filter comes with synthetic media, a silicone anit-drainback valve, and metal endcaps to meet your performance filter needs when paired with either conventional, semi-synthetic, or synthetic motor oil..
  • PERFORMANCE: This Castrol oil filter is designed for peak performance for up to 20,000 miles when paired with an equivalent 20,000-mile motor oil..
  • This product is proudly MADE IN THE USA!.
Check Stock

Oil Filter Wrench and Drain Tool Set for Toyota Lexus Scion 2.0L to 5.7L Engines with Cartridge Style Oil Filter System Housings Fits Camry, RAV4, Highlander A7716F

  • High Quality: A ABIGAIL Toyota oil filter wrenches are forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight Toyota oil filter caps. and the surface is treated with a high quality black anodized finish to prevent corrosion..
  • Design: There are 4 slots on the bottom edge, which are mated perfectly with the tabs on the Toyota 15620-31060 oil filter cover and helps prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner..
  • Application: This 64mm 14 flute oil filter wrench fits all Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system while it does not fit the 1.8L engine or vehicles that use disposable spin-on style oil filters..
  • Installation Instruction: Install the wrench on the filter cap indexing the tabs and unscrew it using either a 27mm socket or 3/8” drive ratchet. If the cap is severely over tightened we recommend using only a 27mm socket to avoid breakage..
  • Service: 100% satisfaction guarantee, If you have any issues with the oil filter wrench, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you s....
Check Stock

The Mower Shop 22 in Recycler Tune-Up Kit for XT675 (Serial Number Above 315000001)

  • Fits 22 IN Recycler with XT675 engines (blue and white air filter).
  • Air Filter ( 14 083 22-S) with Spark Plug ( 14 132 11-S).
  • 22” Blade (Toro Part 131-4547-03 (Replaces 108-9764-03)).
  • Toro Premium Oil 18 FL. OZ SAE30 Oil (Toro Part 38916).
  • The Mower Shop Decal to record date of service.
Check Stock

Heavy Duty Oil Filter Wrench for Toyota,Lexus,RAV4,Camry,Tundra,Highlander,Sienna and More-Cup Style Oil Filter Cap Removal Socket Tool for 2.5-5.7L Engine with 64mm Cartridge Style Oil Filter Housing

  • High Quality: A ABIGAIL Toyota oil filter wrenches are forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight Toyota oil filter caps. and the surface is treated with a high quality black anodized finish to prevent corrosion..
  • Design: There are 4 slots on the bottom edge, which are mated perfectly with the tabs on the Toyota 15620-31060 oil filter cover and helps prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner..
  • Application: This 64mm 14 flute oil filter wrench fits all Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system while it does not fit the 1.8L engine or vehicles that use disposable spin-on style oil filters..
  • Installation Instruction: Install the wrench on the filter cap indexing the tabs and unscrew it using either a 27mm socket or 3/8” drive ratchet. If the cap is severely over tightened we recommend using only a 27mm socket to avoid breakage..
  • Service: 100% satisfaction guarantee, If you have any issues with the oil filter wrench, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you s....
Check Stock