ReviewsOil Filter Element

1 NPT SUPER DUTY Industrial Grade Filter Regulator Coalescing Desiccant Dryer System For Compressed Air Lines Metal Bowls Great For Paint Spray And Plasma Cutter AUTO DRAIN

PLEASE NOTE: 1" NPT MEASURES 1.315" OUTSIDE THREAD DIAMETER IN INCHES. 1" NPT, Industrial Rated 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And Internal Float Drain (AUTO DRAIN) STAGE 1.
175 PSI Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Then Finally Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer.
STAGE 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. Regulator Adjusts Pressure From 7 To 175 PSI. 11oz Metal Bowl With Visible Sight Glass..
STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 11oz Metal Bowl With Visible Sight Glass..
STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 11oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 4 Bags Desiccant Beads..

Check Stock

NANPU 3/4 NPT Industrial Grade 3 Stage Air Drying System - Particulate Filter Coalescing Filter Desiccant Dryer & Air Regulator Metal Bowl Auto Drain Suitable for Paint Spray＆ Plasma Cutter

...ressure Resistance】Works Perfectly in the Pressure Environment of 30-175 psi.
【High Degree of Safety】Excellent Metal Bowl w/ Visible Sight Glass in Every Stage Protect You and the System throughout the Entire Process..
【Stage 1: Filter & Regulator】Compressed Air Water Trap Filter Equipped with 5 Micron Element, which has Excellent Filtering Performance, Much Longer Life and Reuse Feasibility, Remove Most of Moisture and Particles in the Air Line.
Pressure Regulator Accurately Adjust and Stabilize the Air Pressure..
【Stage 2: Coalescing Filter】The Coalescing Filter is Equipped with a 0.01 Micron Element that can Remove 99.9% of Moisture, Smaller Particles and Oil, which Pass Through Stage 1 Combo. When the Filter Element needs to be Replaced, the Red Indicator will Pop Up..
【Stage 3: Desiccant Air Dryer】The Desiccant Air Dryer allows the Air to be Thoroughly Dried and Cleaned before it Enters your Pneumatic Tools. The Desiccant Beads need to be Added to the Metal Bowl. When it needs to be Replaced, the Beads will Change from Blue to Pink..
【Accessories】2 x 5 Micron Element(One of Them is Installed in the Product), 2 x 0.01 Micron Element (Same as Above), 4x 3.5oz (100g) Desiccant Beads Bag. 2 x 3/4" NPT Fittings, 1 x Thread ....

Check Stock

NANPU 1/2 NPT Industrial Grade 3 Stage Air Drying System - Particulate Filter Coalescing Filter Desiccant Dryer & Air Regulator Metal Bowl Auto Drain Suitable for Paint Spray＆ Plasma Cutter

...ressure Resistance】Works Perfectly in the Pressure Environment of 30-175 psi.
【High Degree of Safety】Excellent Metal Bowl w/ Visible Sight Glass in Every Stage Protect You and the System throughout the Entire Process..
【Stage 1: Filter & Regulator】Compressed Air Water Trap Filter Equipped with 5 Micron Element, which has Excellent Filtering Performance, Much Longer Life and Reuse Feasibility, Remove Most of Moisture and Particles in the Air Line.
Pressure Regulator Accurately Adjust and Stabilize the Air Pressure..
【Stage 2: Coalescing Filter】The Coalescing Filter is Equipped with a 0.01 Micron Element that can Remove 99.9% of Moisture, Smaller Particles and Oil, which Pass Through Stage 1 Combo. When the Filter Element needs to be Replaced, the Red Indicator will Pop Up..
【Stage 3: Desiccant Air Dryer】The Desiccant Air Dryer allows the Air to be Thoroughly Dried and Cleaned before it Enters your Pneumatic Tools. The Desiccant Beads need to be Added to the Metal Bowl. When it needs to be Replaced, the Beads will Change from Blue to Pink..
【Accessories】2 x 5 Micron Element(One of Them is Installed in the Product), 2 x 0.01 Micron Element (Same as Above), 4x 3.5oz (100g) Desiccant Beads Bag. 2 x 1/2" NPT Fitings, 1 x Thread S....

Check Stock

3/4 NPT SUPER DUTY Industrial Grade 4 Stages Filter Coalescing Desiccant Dryer Regulator System For Compressed Air Lines Metal Bowls Great For Paint Spray And Plasma Cutter AUTO DRAIN

PLEASE NOTE: 3/4" NPT MEASURES 1.050" OUTSIDE THREAD DIAMETER IN INCHES. 3/4" NPT, Industrial Rated 4 Stage Combo Water Filter/ Coalescing Filter/ Desiccant Dryer/ Pressure Regulator System, With Wall Mounting Bracket And Internal Float Drain (AUTO DRAIN) STAGE 1.
175 PSI Max Input. This Unit Will Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer, Then Finally Regulator Your Outgoing Air Pressure.
STAGE 1: Water Trap Filter. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. 11oz Metal Bowl With Visible Sight Glass..
STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 11oz Metal Bowl With Visible Sight Glass..
STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 11oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 4 Bags Desiccant Beads. STAGE4: Pressure Regulator, Regulator Adjusts Output Pressure From 7 To 175 PSI..

Check Stock

Motivx Tools 2pc Adjustable Oil Filter Wrench Set for Removing 2.5" - 4.15" Diameter Spin-On Oil Filters

...o – These oil filter tools remove 2.5" - 4.15" diameter traditional spin-off style oil filters. These tools are for oil filter removal only, not for installation. Not for use on chrome plated oil filters or cartridge style filters where you have to remove a plastic or metal cap to expose the filter element..
Better Design – Both wrenches feature a .050” captured spring as opposed to the flimsy .020” spring found on other wrenches. The oil filter contact surface has a tooth style design for a better grip and less slip..
Quality Materials – The jaws are built tough using nickel plated 4130 chromoly steel and attached to the 3/8” thick solid steel top plate..
Professional Quality - Motivx Tools is a family owned and operated specialty tool company located in the United States and we take great pride in our products. These oil filter wrenches are backed by a limited lifetime warranty and excellent customer service..
Purchase With Confidence - Buy our Motivx Tools universal oil filter wrench knowing it's a perfect fit, excellent quality, built to last, an....

Check Stock

SCHULZ REFRIGERATED AIR DRYER FOR AIR COMPRESSOR COMPRESSED AIR SYSTEMS 20 CFM GOOD FOR 5HP COMPRESSORS MAX WITH PRE-FILTERS

NEW 20-25 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR + OIL REMOVING COALESCING FILTER.
THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR (COMPRESSED AIR PIPING NOT INCLUDED).
DRYER: 20 CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
STAGE 1: WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.

Check Stock

SCHULZ REFRIGERATED AIR DRYER FOR AIR COMPRESSOR COMPRESSED AIR SYSTEMS 50 CFM GOOD FOR 10HP & 15HP COMPRESSORS WITH PRE-FILTERS

NEW 50 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR + OIL REMOVING COALESCING FILTER.
THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR ( COMPRESSED AIR PIPING NOT INCLUDED).
DRYER: 50 CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
STAGE 1: WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.

Check Stock

SCHULZ REFRIGERATED AIR DRYER FOR AIR COMPRESSOR COMPRESSED AIR SYSTEMS 75 CFM GOOD FOR 15HP & 20HP COMPRESSORS WITH PRE-FILTERS

NEW 75 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR + OIL REMOVING COALESCING FILTER.
THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR (COMPRESSED AIR PIPING NOT INCLUDED).
DRYER: 75 CFM @ 100 PSI / 1" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
STAGE 1: WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN) 11oz METAL BOWL.
STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES 99.98% REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH 11oz METAL BOWL AND INTERNAL FLOAT DRAIN (AUTO DRAIN).

Check Stock

HOODELL 52 050 02 Oil Filter with Gloves, Pro Performance Compatible with Kohler 52 050 02 S, Cub Cadet LTX 1040, Lawn Mower/Tractor Extend Life Series Oil Filter

✅Pro Performance Parts: Exactly replacement for Kohler oil filter KH-52 050 02, KH-52 050 02-S, fit CH11 - CH15, CV11 - CV22, M18 - M20, MV16 - MV20, K582, 15 - 27 HP engine..
✅Premium Maintenance Element: Replace Kohler engine OEM oil filter, exact size and perfect fit. Made of quality material, thick and sturdy case, stout gasket seal without leaks, capture fine particles down to 27 micron. Protecting engine like a guard..
✅Wide Use Kit: Compatible for Kohler kt745 kt735, Cub Cadet lt1045 lt1050 ltx 1045 ltx 1050, Husqvarna yth21k46 lgt2654, Onan p218 lawn mower / tractor oil filter..
✅Extra Capacity and Extend Life: Much higher than other shorter filters, almost twice the volume, filtration area and cooling time. So, capture more harmful debris with the same flow as genuine filter. Keep oil clean and lubrication well. Extend life and save a lot..
✅What You Get: 1 pair gloves + 1 pack oil filter ( height 3-1/8.

Check Stock

Schulz Refrigerated Air Dryer for Air Compressor Compressed Air Systems 35 cfm Good for 7.5hp & 10hp Air Compressors with Regulator Pre-Filter

NEW 35 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR/PRESSURE REGULATOR + OIL REMOVING COALESCING FILTER.
THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR ( COMPRESSED AIR PIPING NOT INCLUDED).
DRYER: 35CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
STAGE 1: ADJUSTABLE 7 - 175 PSI PRESSURE REGULATOR + GAUGE / WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.

Check Stock

Auto Car Heater Fan Plug in Defogger & Defroster 12V 150W 360 Degree Rotation Portable Car Electric Fast Heating Cooling Fan Car Windshield Defroster for All Cars

NEW 50 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED AIR PRESSURE REGULATOR / WATER SEPARATOR + OIL REMOVING COALESCING FILTER.
THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR (COMPRESSED AIR PIPING NOT INCLUDED).
DRYER: 50 CFM @ 100 PSI / 1/2″ FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
STAGE 1: AIR PRESSURE REGULATOR ADUSTABLE 7 – 175 PSI / WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.

Check Stock