ReviewsOil Filter Replacement Tool

Motivx Tools Oil Filter Removal Tool - Adjustable Wrench for 2.5" - 3.25" Small Diameter Spin-On Oil Filters

  • SECURELY GRIP AND REMOVE A WIDE RANGE OF FILTERS – The Motivx Tools MX2330 oil filter wrench removes small 2.5” - 3.25” diameter traditional spin-on or canister style oil filters. The wrench features a tooth style design for a secure grip that won't slip and lets you easily and safely remove the filter..
  • HEAVY DUTY CONSTRUCTION – This removal tool features a .050” captured spring as opposed to the flimsy .020” spring found on other wrenches. The jaws are built tough using nickel plated 4130 chromoly steel and attached to the 3/8” thick solid steel top plate. Low profile design gives you access to tight access spots..
  • EASY TO USE – Simply slide the jaws of the wrench over the filter while slightly rotating to the right (tighten). Once the wrench is seated in place on the filter, use a ratchet and 3/8" extension to begin ratcheting the wrench counter-clockwise (loosen). The jaws will grip the stuck filter tightly and begin loosening it..
  • PROFESSIONAL QUALITY - Motivx Tools is a specialty tool company located in the United States and we take great pride in our products. These oil filter wrenches are b....
Check Stock

Wittyware Universal Oil Filter Wrench 3 Jaw Adjustable Oil Filter Removal Tool, 2 Way Oil Filter Wrench for Removing Oil Filters from Diameters 2-1/2'' to 4-9/16'' Inches

  • This adjustable oil filter wrench can remove or tighten oil filters from 2-1/2'' to 4-9/16'' diameter (64 - 116mm).
  • The 3 Jaw oil filter wrench comes with a drive adapter, can be used with 1/2" or 3/8" square drive ratchet or wrenches.
  • The oil filter removal tool is gear-driven and heat-treated legs will handle high torque applications.
  • Get Your Stuck Oil Filter Off Easier- This oil filter wrench set is designed in adjustable 3 jaws, which to help you remover the stuck filters on your vehicle much more easier.
  • This oil filter tool is in 2 way design, can be Clockwise or Anti-clockwise operation. Increases its grip the more torque applied.
Check Stock

Mopar 82215366 Front End Cover Jeep Gladiator Wrangler W/ Diesel Engine

  • ... Engine Oil Filter - The engine oil filter is designed to protect and capture harmful contaminants like carbon, sand, dust, and bits of metal that circulates into your engine. It filters the oil to prolong its life and to provide long lasting engine protection..
  • Compatible Replacement for Jeep & Ram Diesel 3.0L Vehicles - 2021 Gladiator 3.0L | 2020-2021 Wrangler 3.0L | 2020-2021 1500 3.0L | It is important to have clean motor oil because dirty oil can wear the oil pump’s machined components and damage the bearing surfaces in the engine. The oil filter helps remove pollutants from your car engine’s oil that can accumulate over time..
  • Replaces Part# 68507598AA, 68498720AA commonly found on popular Gladiator, Wrangler or 1500 models including year models 20, 21. If you are experiencing acceleration problems, metallic noises under the hood or low oil pressure your oil filter might need to be replaced..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Oil filter should be replaced every time the oil is changed in yo....
Check Stock

Feoie 926-876 Aluminum Engine Oil Filter Housing with Oil Filter and Cooler Sensors Assembly Fit for 2011-2016 Chrysler 200 300, Dodge Charger, Jeep, Ram 1500, Promaster, 3.6L V6, 926-959 68105583AF

  • [ Perfect Replacement for Plastic Oil Filter Housing ] - The original plastic oil filter housing was prone to damage and leaks and allowed debris to enter the oil on a regular basis, which could damage engine components and clog the oil filter. Our upgraded oil filter housing is made entirely of aluminum to prevent leaks, cracks, and warping, which is a perfect replacement for plastic oil filter housings.
  • [ Fitment ] - Aluminum oil filter housing for 2014-2016 Jeep Grand Cherokee | 2014-2016 Jeep Cherokee | 2014-2016 Jeep Wrangler | 2011-2016 Dodge Journey | 2014-2016 Dodge Charger | 2011-2016 Dodge Challenger | 2011-2016 Dodge Durango | 2011-2016 Dodge Grand Caravan | 2011-2014 Dodge Avenger | 2013-2016 Ram 1500 | 2015 Ram C/V | 2014-2016 Ram Promaster 1500 | 2014-2016 Ram Promaster 2500 | 2014-2016 Ram Promaster 3500, 2011-2016 Chrysler 200 | 2011-2016 Chrysler 300 | 2011-2016 Chrysler Town Country.
  • [ Oil Cooler Replacement ] - 926-876 aluminum engine oil filter housing for 926-959 926-876 68105583AF engine oil cooler, 68105583AA 68105583AB 68105583AC 68105583AD 68105583AF 68105583AG, engine oil cooler 5184294AE.
Check Stock

SimPure Y6 PP+CTO Filter Replacement Cartridge Only Applicable to Y6 System 6-12 Months Replacement Cartridge 1 Pack

  • SimPure Y6 PP+CTO Filter Replacement Cartridge (Only applicable to Y6 System), 6-12 Months Replacement Cartridge (1 Pack).
  • STAGE 1&2: PP + CTO composile filter to effectively remove rust, sand, soil, pesticides, pesticide residues, odors, organic matter in water, residual....
  • Compatible Replacement Filters for SimPure Y6 countertop reverse osmosis water filter system with UV Sterilization (ASIN B07YRLHTFR)..
  • It is commended to replace the Y6 PP+CTO Filter EVERY 6-12 MONTHS to ensure the quality of the water.And the Maintenance Indicator Light will light up....
  • QUICK CHANGE & TOOL FREE: The twist-in filter system makes the filter replacement a breeze and no tools required. The tool-free replacement save your....
Check Stock

XtremepowerUS 2-1/2 to 4 Two Way 3 Leg Oil Filter Wrench Remover

  • Wide Application - The oil filter wrench can be adjust to remover the filters from 2-1/2 inch to 4 inch filters. Fits 1/2 and 3/8 inch square drive....
  • Special Design - The oil filter wrench is specially designed with three jaws. These three jaws will catch the filter more tightly..
  • Function Type -The oil filter wrench is a universal tool to remove the filters on your vehicles. Sometimes the filters are very tough. Then you need a....
  • High Quality - The oil filter wrench is made of 45# carbon steel. This kind of material is much stronger than the normal materials. With the shinning....
  • Easy to use - This Oil Filter Wrench is used to remove the oil filter from cars and trucks. It is adjustable simply adjust it on the filter by turning....
Check Stock

Replacement Engine Oil Filter - Compatible with Jeep Gladiator, Wrangler & Ram 1500 3.0L Vehicles - Replaces 68507598AA, 68498720AA - 2020, 2021 - 3 Liter Diesel Engines

  • ... Engine Oil Filter - The engine oil filter is designed to protect and capture harmful contaminants like carbon, sand, dust, and bits of metal that circulates into your engine. It filters the oil to prolong its life and to provide long lasting engine protection..
  • Compatible Replacement for Jeep & Ram Diesel 3.0L Vehicles - 2021 Gladiator 3.0L | 2020-2021 Wrangler 3.0L | 2020-2021 1500 3.0L | It is important to have clean motor oil because dirty oil can wear the oil pump’s machined components and damage the bearing surfaces in the engine. The oil filter helps remove pollutants from your car engine’s oil that can accumulate over time..
  • Replaces Part# 68507598AA, 68498720AA commonly found on popular Gladiator, Wrangler or 1500 models including year models 20, 21. If you are experiencing acceleration problems, metallic noises under the hood or low oil pressure your oil filter might need to be replaced..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Oil filter should be replaced every time the oil is changed in yo....
Check Stock

OEMTOOLS 25101 3-Jaw Adjustable Magnetic Oil Filter Wrench, Oil Filter Wrench Small, Oil Filter Wrench Adjustable, Black and Green

  • APPLICATIONS GALORE: This adjustable oil filter wrench removes oil filters on many domestic and foreign light trucks and passenger vehicles, as well as motorcycles and lawnmowers.
  • EXTRA GRIP: Our oil filter puller includes a magnetic base attachment that keeps the oil filter remover securely in place while you remove filter caps.
  • VERSATILE: This auto adjustable oil filter wrench fits filter sizes between 2.4 to 3.6 inches (60MM to 93MM).
  • HOLD ON TIGHT: Our adjustable filter wrench features spring-loaded jaws for a more secure grip than the average oil filter claw wrench.
  • DON'T GET STUCK: Working in tight areas is hard enough without stuck on filters.
  • This compact adjustable oil filter removal tool removes tough filters in tight spaces.
Check Stock

Yoursme Oil Filter Drain Hose Tool for Toyota, Lexus, Scion 2.0L - 5.7L Engines

  • FUNCTION: This tool fits Toyota 2.0L to 5.7L engines that use the cartridge style oil filter system. It makes the oil change process much cleaner by draining the filter housing prior to removal preventing oil spills..
  • FITMENT: Works on many late model Sienna, Tundra, Highlander, Camry, RAV4, Tacoma, Sequoia, Avalon, Corolla, FJ Cruiser and Venza Toyota vehicles..
  • SIMPLE TO USE: Simply screw the tool into the drain valve on the oil filter housing, and then tighten the knurled nut to drain the housing. Once the housing is drained it can be removed to replace the filter without the usual mess..
  • FEATURE: The 3 piece all metal body connects to a 30” long drain hose that allows you to direct the oil into your oil disposal container..
  • 100% SATISFACTION GUARANTEE: Yoursme aims to provide the best service for our customer, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days, no questions asked money back guarantee with 12 months’ warranty..
Check Stock

Xtensi Engine Oil Cooler and Oil Filter Housing Adapter Assembly Compatible With 2011-2013 Jeep, Chrysler 200/300,Dodge Journey Charger Caravan 3.6L Aluminium, Replaces 5184294AE

  • Oil Filter Housing Adapter is not a genuine part, it is a direct replacement and will fit, work and look exactly like the factory part. Replace Part Number: 5184294AE. Please check the part number before purchase..
  • Only for 3.6L 6 cyl engine. Compatible with 6 cyl 3.6L engine 2011-2013 Chrysler 200, 2011-2013 Chrysler 300 V6 3.6L, 2011-2013 Chrysler Town and Country V6 3.6L, 2011-2013 Avenger V6 3.6L, 2011-2013 Challenger V6 3.6L, 2011-2013 Charger V6 3.6L, 2011-2013 Journey V6 3.6L, 2011-2013 Caravan V6 3.6L, 2011-2013 Durango V6 3.6L, 2011-2013 Grand Cherokee V6 3.6L, 2012-2013 Wrangler V6 3.6L, 2013 Ram 1500 V6 3.6L, 2012-2013 Ram C/V Base V6 3.6L..
  • Advantage: Keep the engine oil clean and cool. This replacement oil cooler housing comes with a new pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean. Beside that, it also cool down the oil that enters the engine. Direct replacement. Fluorocarbon and HNBR sealing rings are resistant to oil, abrasion and temperature..
  • The oil cooler is made of lightweight aluminum alloy, has 16-plate (8 plate thick and 8 plate thin), can be better cooling. Oil filter housing adapter oil cooler kit comes with a complete set of ....
Check Stock

Kohler 52 050 02-S Engine Oil Filter Extra Capacity for CH11 - CH15, CV11 - CV22, M18 - M20, MV16 - MV20 and K582, 2 Pack

  • ... FrontMount 618, 718K, 620T, 623T, 723KH2, 723T, 725KT, 727T 727K, 727T6 & 727T EFI Models Grasshopper MidMount 120K, 125V, 225V-Gr, 227V-G4 EFI, 329G4, 333G5, 218, 220, 223, 225, 227, 327 EFI OEM spin-on oil filter..
  • GENUINE OEM PARTS: Protect your investment and ensure peak performance by trusting only genuine OEM replacement parts and supplies to maintain your engine. These parts are manufactured to meet ultra-precise engineering specifications, and can help you maximize performance and significantly extend the life of your machine..
  • OIL FILTER REPLACEMENT: This item replaces the following oil filter parts: Ariens 20715100, Husqvarna 531307392, Kohler 25 050 27, 25 050 27-S, 25 050 33-S, 25 050 34-S, 52 050 02, 52 050 02-S, 52 050 02-S1..
  • KOHLER ENGINE COMPATIBILITY: A genuine replacement engine oil filter for your Kohler engine, this part fits the following Kohler engine models: CH11-CH25, CV11-CV22, M18-M20, MV16-MV20 and K582..
  • FILTER SPECIFICATIONS: This oil filter 2-pack measures 8.54 x 3.66 x 3.27 inches and weighs 0.95 pounds. Thread 3/4"-16 OD 3" Height 3 7/16" Micron 29. 8-11 psi pressure relief valve anti-drain valve..
Check Stock