ReviewsOil Filter Socket Set

Heavy Duty 36mm 6-Point Socket For BMW,Ford,Mercedes,Mini,VW,Audi,Volvo,Porsche Vehicles and All With 36mm Oil Filter Caps, Low Profile Oil Filter Wrench，3/8' Drive Oil Filter Removal Tool

  • FIT FOR: Ibetter 36mm 6-PT socket fit for BMW, Ford, Mercedes, Mini, VW, Audi, Volvo, Porsche Vehicles and all with a 36mm oil filter cap. Certanly, anywhere the 36mm 6-point socket fit for..
  • SUPER DURABLE: Ibetter 36mm oil filter wrench made from super durable chrome vanadium steel that doesn’t crack lifetime..
  • NEVER RUST OR CORROSION: The 36mm oil filter removal tool is finished in matte chrome which can resist rust and corrosion forever..
Check Stock

Yoursme Fuel Filter Oil Filter Socket 24mm / 36mm Fuel Filter Cap Remover and Installer for 2003-2010 6.0L / 6.4L Ford Powerstroke Diesel

  • Our Diesel Fuel Filter Socket works for 2003 - 2010 Ford Trucks and Vans. 24mm / 36mm reversible (also works on 35mm applications), fits many other 24/35/36mm filter applications!.
  • All you need is one socket to service both the upper and lower fuel filters and the oil filter..
  • Low Profile Design provides clearance for servicing the primary fuel filter..
  • Designed to Remove and Install Filters on 6.0L / 6.4L FORD POWERSTROKE. This Socket will make the job more efficient, saving your time!.
  • Combine with your stubby (1.5 inch works perfect) 3/8th's extension and 3/8th's ratchet and you are ready to get to work..
Check Stock

Keadic 2 Pcs Universal Oil Filter Wrench Set with Adjustable 3 Leg Oil Filter Remover Tools from 2-1/8 to 4-1/2’’ 54-115mm and 3/8 72 Tooth Quick Release Ratchet Torque Spanner Mechanical Tools

  • 【High Value Oil Filter Wrench Kit】You will get 1 pcs 3 jaws adjustable filter wrench and 3/8" drive 72 tooth quick release ratchet. The ratchet....
  • 【Durable Material & Long Service Time】Compared with other oil filter wrench on market, our oil filter removal tools are made of 45# carbon steel....
  • 【Oil filter Claw 】The 3-Jaw 2-Way Oil Filter Wrench could be adjusted to fit most oil filters from 2-1/2 to 4.5 inches (65 to 110 mm) in diameter.....
  • 【72-Tooth Drive Socket Wrench】Required Only a 5 degree swing arc. Precision ratchet design for increased productivity；Ergonomic TPR handle for a....
  • 【Universal Application】Compact structure and fits in tight spaces. Perfect remover the filters from 2-1/8 To 4-1/2 inch in all kinds of vehicles....
Check Stock

Shonee 36mm 6-Point Steel Socket Wrench For Mercedes,BMW,Audi,Ford,Mini,VW,Volvo,Porsche Vehicles and All With 36mm Oil Filter Caps, Low Profile Oil Filter Wrench，3/8' Drive Oil Filter Removal Tool

  • FIT FOR: Shonee 36mm 6-PT steel socket fit for Mercedes Benz, BMW, Audi,VW, Ford, Mini, Volvo, Porsche Vehicles and all with a 36mm oil filter cap. Certanly, anywhere the 36mm 6-point socket fit..
  • SUPER DURABLE: Shonee 36mm steel oil filter wrench is made from super durable chrome vanadium steel that doesn’t crack lifetime..
  • NEVER RUST OR CORROSION: Shonee 36mm oil filter removal tool is finished in matte chrome which can resist rust and corrosion forever..
  • LIFETIME WARRANTY - shonee is a brand specializing in the production and management of automotive supplies. Our products undergo strict product quality monitoring before sales. DRIVE - 3/8-inch drive.
Check Stock

Oil Filter Cap Removal Tool Aluminum Cup Wrench 64mm 14 Flute for Toyota Lexus Scion 2.5L to 5.7L Engines with Cartridge Style Oil Filter Housings Fits Camry, RAV4, Highlander, Sienna, Tundra and More

  • This aluminum cup wrench is a perfect removal tool for Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge-style engine oil filter housing, while it does not fit the 1.8L engine or vehicles that use disposable spin-on style oil filters.
  • This extended life oil filter wrench is forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight Toyota oil filter caps.
  • The surface of this oil filter wrench is treated with high quality black anodized finish to prevent corrosion.
  • There are 4 slots on the bottom edge, which are mated perfectly with the tabs on the Toyota 15620-31060 oil filter cover and helps prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner.
  • What you will get are 1 metal cup wrench for removing oil filter and 100% satisfaction customer care.
Check Stock

GUGUGI 10 Pack Automotive Vinyl Wrap Felt Squeegee Soft Scraper Car Wrapping Tool Kits with Micro Fiber Felt for Auto Vinyl Wrap, Window Tint, Wallpaper Installation, 5Inch

  • 5PCS SET -- You will get 16mm & 17mm Engine Mount Socket Wrench, 18mm & 21mm Rear Camber Adjusting Wrench, 24mm Oil Filter Removal Wrench, all marked with the number. 12 point, tilt angle design, used with 3/8'' drive..
  • WHY NEED IT -- 1) 16mm/17mm wrench used for removing nuts from engine fixing screw. 2) Offset 18mm/21mm wrench for adjusting rear axle camber. 3) 24mm oil filter removal wrench for models with common rail engines with DSG gearboxes, help you change oil without removing the battery..
  • 1) 16MM & 17MM Engine Fixing Screws Wrench compatible with Mercedes Benz W124 W126 W140 W170 W201 W202 W203 W204 W210 W211 W219 W220 W221 models..
Check Stock

WYNNsky Oxygen Sensor Remover Set, Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set, 7 Pieces O2 Sensor Socket Set

  • Application: This socket set is designed for the removal inspection or replacement of heated and non-heated oxygen sensors fitted to the following vehicle Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda. These sockets feature cut-away sections allow some sockets to fit over wiring harnesses, complete with the black phosphate finish for a durable design..
  • 3/8’’ Drive × 7/8’’ ×1/2’’ Oxygen Sensor Socket/Vacuum Switch Socket removes and installs vacuum switch with a 7/8’’ hex and some oxygen sensors.
  • 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
  • 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
  • 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
  • 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
  • 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.
Check Stock

BETOOLL 23pcs Aluminum Alloy Cup Type Oil Filter Cap Wrench Socket Removal Tool Set 1/2'dr. with a Storage Case

  • Adapter allows use with 1/2" square drive wrenches.
  • Designed to grip like socket reducing the possibility of crushing filter.
  • 23pcs Aluminum Alloy Cup Type Oil Filter Cap Wrench Socket.
Check Stock

8MILELAKE 10pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Socket Set

  • 10Pcs Sensor Oil Pressure Sending Unit Socket Set Oxygen Injection Tool Set Remove Oxygen.
  • Sensors, Injectors, Oil Pressure Sending Units And Vacuum Switches. Heat-treated Chrome.
  • Vanadium And Chrome Molybdenum Steel With Black Oxide Finish Accepts Either 3/8 Or 1/2"".
  • Drive Ratchet Depending On The Size of The Socket 10Pc Oxygen Sensor & Diesel Injection Oil.
  • Pressure Unit Vacuum Switches Socket Set Heat Treated Chrome Vanadium & Chrome Molybdenu.
Check Stock

Motivx Tools Oil Filter Wrench for Toyota Camry, Tundra, Tacoma, 4Runner, RAV4 and More - 64mm 14 Flute Precision CNC Machined Aluminum Oil Filter Removal Tool

  • COMPATIBLE WITH ALL TOYOTA CARTRIDGE STYLE OIL FILTERS - The Motivx Tools 64.3mm 14 flute oil filter wrench is compatible with all Toyota and Lexus cartridge style oil filter caps from 1.8L - 5.7L engines. This includes popular models like Camry, Tundra, Tacoma, 4Runner, RAV4, Corolla, Highlander, Prius and more that use a cartridge style filter where you remove a plastic cap to expose the paper filter element inside..
  • WILL NOT BREAK TABS ON FILTER - This patent pending second generation filter removal tool features a “notch-less” design which securely grips the fluted plastic portion of the oil filter cap without engaging the tabs like older wrench designs. This prevents the tabs from cracking or breaking off which can lead to serious oil leaks..
  • FITS A WIDE RANGE OF FILTERS - Outdated filter wrenches have limited fitment and only work with filters for either 1.8L or 2.5-5.7L engines. The Motivx Tools MX2320-US wrench works with all Toyota cartridge style filters and is compatible with Toyota spin-on style oil filters 90915-YZZF1, 90915-YZZN1, 90915-10009, and 90118-WBA40. Also works with select 14 flute spin-on filters from Honda, Bosch, Mobil 1, Purolator and Hiflofiltero..
  • MADE IN USA - This oil filter wrench is proudly made in the USA....
Check Stock

Motivx Tools MX2324-US 84mm 14 Flute Precision CNC Machined Aluminum Oil Filter Wrench Compatible with Mercedes Dodge and Jeep 3.0L Diesel Engines

  • This 84.4mm 14 flute oil filter wrench is compatible with Mercedes, Dodge, and Jeep 3.0L diesel engines equipped with plastic oil filter caps which must be removed to expose the filter element..
  • This oil filter wrench is proudly made in the USA. It is precision CNC machined from solid aluminum and includes a manufacturers lifetime warranty..
  • The main body of the wrench is made from 6061-T6 aluminum and anodized grey while the drive hub is made from 7075-T6 aircraft aluminum for ultimate strength and anodized red for better visibility..
  • The wrench can be operated with a 3/8” drive ratchet or extension, or a 24mm socket..
Check Stock