ReviewsOil Gate Valve

Valterra 7301 ABS Gate Valve, Black, 3\ Slip

• APPLICATIONS: Ideal for low pressure and vacuum applications as a quick shut-off valve - Can be used with air or clean, gray or waste water - See description for specific applications.
• KEY FEATURES: Unrestricted flow - Full port - 304 Stainless Steel shaft/paddle and handle.
• SPECIFICATIONS: Maximum Pressure 6psi Open/10psi Closed - PVC with female Slip/Hub fittings which receive 6" PVC pipe.
• REPAIRS: Bolted assembly allows for replacement of valve body and gate seals - Handle can be replaced by removing C-clip.

Gate Hinges | Hardware Double Acting Gravity Oil Rubbed Bronze Finish

• Double Action Hinges Allow gate to swing open and self return to center.
• Oil Rubbed Bronze Finish- Load Rating for Gates less than 30 lbs.
• Includes lock open feature (If doors are open 125 degrees).

Genuine OEM Toyota Oil Filter 90915-YZZD3 (4PK) with DIINGO Plug Oil Drain Gasket 90430-12031 (4PK) Fit for 4Runner FJ Cruiser Land Cruiser Sequoia Tacoma Tundra

• The Pressure Release Valve: Oil filters clog when exposed to excess contaminants. This clogging can restrict the flow of oil to the engine causing severe damage. The Pressure Relief Valve of a Genuine Toyota Oil Filter opens only when the filter is clogged allowing oil to flow to the engine. The valve on some non-genuine Toyota oil filters open at lower pressures, allowing unfiltered oil to the engine even when the filter is not clogged..
• The Filter Element: The Toyota approved element effectively filters contaminants while meeting all Toyota Parts specifications for oil flow. By comparison, a lesser quality element may clog over time, which could lead to engine seizure or other potential engine problems. Some non-genuine Toyota oil filters do not meet Toyota’s stringent specifications..
• The Anti-Drainback Valve: Genuine Toyota Oil Filters feature an Anti-Drainback Valve that prevents oil from draining out of the engine and into the oil pan. This helps protect your engine from increased wear during cold-starts..

Superslick AlphaSynth Light Viscosity Valve & Rotor Oil Trumpet Clear Synthetic

Goplus Portable Oil Drain Pan with Pump 17 Gallon Low Profile Oil Change Pan for Truck Car with 8 Hose Black

• 【High Practicability】This oil drain pan is ideal for draining oil or antifreeze where a pit or hoist is not available with a unique no-spill....
• 【Heavy-Duty】 This oil drain pan could hold oil up to 17 gallon, which is perfect for large jobs..
• 【4" Swivel Casters and a Mesh Gate】This oil drain pan features with four 4" swivel casters for easy maneuverability. And the mesh gate could....
• 【Durable Tank】The tank is made from high-impact polypropylene, which is lightweight for easy movement yet durable for long-term using..
• 【T-Handle Folds】Long-reach T-handle makes drain easy to position under vehicles. And it is also great for convenient storage, movement and....

Mamiko 04152-YZZA1 Oil Filter Kit (3Pcs) and 90430-12031 Oil Drain Plug Gaskets (10 Pcs) Compatible with Toyota Avalon Camry RAV4 Sienna Lexus ES300h ES350 IS200t RX350 RX450h Replacement

• The Pressure Release Valve: Oil filters clog when exposed to excess contaminants. This clogging can restrict the flow of oil to the engine causing severe damage. The Pressure Relief Valve of a Genuine Toyota Oil Filter opens only when the filter is clogged allowing oil to flow to the engine. The valve on some non-genuine Toyota oil filters open at lower pressures, allowing unfiltered oil to the engine even when the filter is not clogged..
• The Filter Element: The Toyota approved element effectively filters contaminants while meeting all Toyota Parts specifications for oil flow. By comparison, a lesser quality element may clog over time, which could lead to engine seizure or other potential engine problems. Some non-genuine Toyota oil filters do not meet Toyota’s stringent specifications..
• The Anti-Drainback Valve: Genuine Toyota Oil Filters feature an Anti-Drainback Valve that prevents oil from draining out of the engine and into the oil pan. This helps protect your engine from increased wear during cold-starts..

Engine Valve Cover with Gaskets, Bolts & Oil Filler Cap Compatible with 2011-2020 Chevy Cruze Sonic Trax Volt | Cadillac ELR | Buick Encore 1.4L Turbo Replace# 55573746 25198498 264-968 25198874

• ✅【 REPLACeMENT WITH FRONEZER VALVE COVER】 The valve cover seals the top of your cylinder head to keep debris out of the oil and prevent damage to the valves. Plastic valve covers can warp or crack from heat over time. Valve covers can also warp or bend if the bolts holding them down are over-tightened. If you notice that oil is leaking, your oil is often low, or you smell gas when your engine is running, our quality valve cover can perfectly resolve these problems..
• ✅【FITMENT】 Compatible with 2011-2015 Chevy Cruze 1.4L | 2012-2019 Chevy Sonic 1.4L | 2015-2019 Chevy Trax 1.4L | 2011-2015 Chevy Volt 1.4L | 2014-2016 Cadillac ELR 1.4L | 2013-2019 Buick Encore 1.4L.
• ✅【REPLACES PART NUMBERS】 264-968, SK510A05, 25198498, 25198874, 25198877, 25203036, 55573746.
• ✅【COMPLETE SOLUTION】This valve cover kit comes with 1 * new Valve Cover, 1 * new Oil Filler Cap , 1 * new Valve Cover Gasket and new Bolts. The pcv valve is pre-installed on the valve cover. This valve cover kit is a complete solution for your replacement..
• ✅【TWO YEARS WARRANTY】 This vavle cover kit has undergone a rigorous end-of-line testing for reliability So we offter TWO Years Warranty. If you're not 100% satisfied with our products, simply return it for a full ref....

Spears P106 Series PVC DWV Pipe Fitting, Cleanout Plug, 8' NPT Male

• APPLICATIONS: Ideal for low pressure and vacuum applications as a quick shut-off valve - Can be used with air or clean, gray or waste water - See description for specific applications.
• KEY FEATURES: Unrestricted flow - Full port - 304 Stainless Steel shaft/paddle and handle.
• SPECIFICATIONS: Maximum Pressure 6psi Open/10psi Closed - PVC with female Slip/Hub fittings which receive 8" PVC pipe.
• REPAIRS: Bolted assembly allows for replacement of valve body and gate seals - Handle can be replaced by removing C-clip.

ValvoMax Quick Twist Oil Drain Valve – the Fastest, Easiest, Cleanest Way to Change Oil at Home – No Tools, No Mess, No Cleanup – for M12-1.75 - Stainless Drain Hose Attachment

• CHANGE YOUR OIL AT HOME IN 10 MINUTES OR LESS WITH NO MESS. The fastest, easiest, and cleanest way to change your oil at home with the ValvoMax Quick Twist Oil Drain Valve. Replaces your drain bolt. Find your vehicle using the Amazon Confirmed Fit search tool. Free returns, no oil leaks guaranteed, lifetime warranty, 100% satisfaction, made in USA, veteran owned..
• THE COMPLETE SOLUTION. Includes Quick Twist valve, steel cap with embedded rubber seal, drain tube assembly, and washer for installation. Eliminate the need for extra tools, no stripped or frozen drain plugs, avoid hot oil burns, and drain oil hot. Prevent spills, eliminate injuries, promote sustainability, controlled sampling, lower cost, reduce time, and more!.
• PREMIUM BUILD. Features rugged Stainless-Steel construction that’s built to last, wave spring technology allows for FAST oil drain, premium VITON O-rings, safety cap with embedded rubber seal. Nothing comes close to the durability offered. Material you can TRUST! Designed with 3 redundancies in mind to eliminate any chance of leak..
• NO LEAKS GUARANTEED. The Quick Twist valve has 3 backup mechanisms to p....

Valterra 10" PVC Gate Valve - Slip Hub Fittings with Stainless Steel Paddle

• APPLICATIONS: Ideal for low pressure and vacuum applications as a quick shut-off valve - Can be used with air or clean, gray or waste water - See description for specific applications.
• KEY FEATURES: Unrestricted flow - Full port - 304 Stainless Steel shaft/paddle and handle.
• SPECIFICATIONS: Maximum Pressure 6psi Open/8psi Closed - PVC with female Slip/Hub fittings which receive 10" PVC pipe.
• REPAIRS: Bolted assembly allows for replacement of valve body and gate seals - Handle can be replaced by removing C-clip.

Enhon 2 Set Tub Spout Diverter Repair Kit, Includes 2 x Diverter Valve Stems, 2 x Cup Seals and 2 x Gates, Bathroom Shower Bathtub Leaky Faucet Repair Replacement Parts Replace

• ...take our shower tub spout diverter gate and place the cap seal into the spout gate.
• Third, put the bath diverter gate with the rubber washer into the tub spout.
• Last, place the lift rod into original place.
• Package Includes: the tub spout diverter kit includes 2 x diverter valve stems, 2 x diverter gates and 2 x diverter cup seals totally.
• When you pull on the diverter knob that is supposed to stop the water from flowing on the top spout and instead divert the water flow up to and the shower head.