ReviewsOil Pipe Fitting

boost/vacuum gauge silicone coupler adapter - Car Turbocharger Pipe Fitting Universal Turbocharger Silicone Boost Pipe Hose Nipple Turbo Vacuum VAC Gauge Fitting TDI

Wide Application---The turbocharger pipe fitting is suitable for a 4mm inner diameter pipe. 100% brand new aftermarket Boost Pipe Fitting that has never been used.
For Boost Gauge---This boost hose nipple fitting allows you to fit a boost gauge or any other type of instrument where vacuum or boost pressure is required.
Superior Quality Aluminum Alloy---The turbo boost pipe hose nipple is made of high quality aluminum alloy and durable to use. The manufacture of the fitting meets the strict quality requirements.
Easy Installation---The turbocharger mounting kit is easy to install, simply drill a 8mm hole in your silicone boost pipe and push the nipple through the hole (from the inside), put on the sealing o-ring, washer and tighten down with the nut.
Quality Assurance---As a professional seller, we provide high quality products and considerate services. Every product must go through strict inspection to ensure reliable quality. Please rest assured to buy our products, hope you have a pleasant shopping experience.

Check Stock

Brass Barb Union Fittings LIONMAX Barb Splicer Mender Hose Fittings 4 PCS 1/4 Inch to 1/4 Inch Barb Hose ID with 8 Hose Clamps for Air/Water/Fuel/Oil

【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
【PACKAGE CONTAINS】1/4'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
【TIGHT CONNECTION】1/4 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 1/4'' hose ID hose barb fittings. Meet your multiple needs..

Check Stock

Oatey 30863 Heavy Duty Solvent Cement, 8 Oz, Can, Liquid, Clear

Heavy duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12” diameter with interference fit, up to 18” for non-pressure.
Low-VOC solvent cement meets California South coast air quality management district (SCAQMD) 1168/316a or baaqmd method 40 and various environmental requirements.
Heavy Duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12î diameter with interference fit, up to 18î for non-pressure.
Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD).
Thick formula fills gaps in large diameter pipe and loose fitting joints.
Recommended for potable water, pressure pipe, conduit and DWV.
Recommended application temperature 40°F to 110°F / 4°C to 43°C.

Check Stock

Medoon 10ft 10AN Black Nylon And Stainless Steel Braided Fuel Oil Hose Fuel Line 10pcs 10AN Hose Fitting Kit 6pcs 10AN Hose Separator Clamp 2pcs 10AN to 10AN Male Coupler Adapter Straight Fitting

100% QUALITY MATERIAL:Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
The fitting made of T6061 Aluminum,high strength and good durability.The material of union adapter is lightweight aluminum..
EFFECTIVELY:The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas or antifreeze.10an hose separator clamp is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on..
USEFUL:Inner core CPE has excellent corrosion resistance. It is maintenance free and precision engineered to increase life.Working Temperature: -40 F to 257 F(-40°C to +125°C) under most operating. Working Pressure:500 PSI.
Package Including:10pcs 10AN hose fitting + 10Ft AN10 Stainless Steel Oil line + 6pcs 10AN Hose Separator Clamp + 2pcs 10AN male coupler.
100% SATISFACTION:If you are not satisfied with our fuel oil hose end fitting kit,please conntect us,we will try our best to solve your problem..

Check Stock

TAISHER 2PCS Forging of 304 Stainless Steel Compression Tube Pipe Fitting Connector 1/4 Tube OD x 1/4 NPT Male Straight Adapter

Widely used ——This pipe fitting is suitable for fuel/air/liquid/oil/gas/vacuum pipelines, with good air tightness, pressure resistance, and not easy to trip.
Product Material —— Forging of 304 stainless steel strength and resistance to corrosion..
Working Temperature —— Temperature range from -868 to 1472 degrees F/-500 to 800 degrees c..
Maximum Pressure —— Maximum working pressure is 2800PSI..
Function —— Fittings for connecting and extending stainless steel, copper, rigid and semi-rigid plastic pipes of the same diameter, hex nut construction creates a tight seal, one end is connected to the pipe and the other end is an NPT male connector.NPT thread size is not the actual diameter, it is only the nominal pipe size..

Check Stock

PATIKIL Hose Barb Fitting Elbow 8mm Barbed M14x1.5 Male Thread 2 Pack Carbon Steel Pipe Adapters Connectors for Air Water Fuel Oil Gold

Overall Size: 46 x 35mm / 1.81 x 1.38 inch (L*W).
Advantage: Carbon steel material features high strength, high pressure, and high-temperature resistance. Leakproof comes with 2 washers for good sealing performance.
Instruction: The thread-to-barb pipe fitting is commonly used to connect pipes such as air, gas, water, oil, and fuel in a quick and simple way..
Application: The thread-to-barb pipe fitting is a coupling for joining 2 diameter sizes pipes in different directions. Can be used with PE, nylon and PU tubing in industrial environments, for many fluids.
Notice: Please confirm the correct size before ordering. You can dip the end of the tubing/hose in hot water for a while for push-on installation easily.

Check Stock

iCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass Push Fit, Push-to-Connect Fittings

CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 1/2 in., 3/4 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe.
CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar.
Compact design with wide grip handles. One-handed operation. Quick and easy disassembly.
To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations.
The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors.

Check Stock

Permatex 80632 Thread Sealant with PTFE, 4 oz. , White

Economical general-purpose fitting sealant.
Seals and resists pressure in air, oil, diesel fuel and hydraulic systems.
Remains pliable at higher and lower temperatures.
Suggested Applications: Air conditioning fittings, temperature sending fittings, hydraulic fittings.

Check Stock

High Flow Gasoline Siphon Hose, Manual Oil Water Fuel Transfer Pump, Siphoning Kit for Fish Tank Brewing, Portable Widely Use Hand Fuel Pump, No clamps needed (6.56FT/2M)

Multi-purpose siphon hand pump : With L2m D21mm durable extended and thickened transparent PVC pipe, oil resistant, high temperature resistant, corrosion resistant, making this pump transfer faster, pump 10L/MIN..
High quality rubber : Rubber hand pump with extended hose to start siphoning liquid flow quickly. Siphon hand pump is suitable for gasoline, oil, air, water and other common liquids. Equipped with 6.56FT/9.84FT flexible and durable PVC hose..
Easy to use: Built-in outlet and inlet valves to prevent backflow, direct extraction, and liquid flow in 5 seconds. Arrows indicate the direction of flow..
High-flow manual siphon pump. With L2m D21mm durable long and thick transparent PVC pipe, oil resistant, high temperature resistant, corrosion resistant, making this pump faster transmission speed, pump 10L/MIN..
Note: The liquid you want to extract must be higher than the inlet bucket. The fitting must remain inside the liquid, not just on the surface..

Check Stock

3/8 Hose Barb to 1/2 Male NPT 90 Degree Elbow Brass Hose ID to Pipe Threaded L Right Angle Fitting Fuel/Air/Water/Gas/Oil WOG 2 Pack

✅ CONTENTS: Two 3/8-inch barb to 1/2-inch NPT male 90-degree brass elbows, use it to change the flow direction from vertical pipe to horizontal hose or the opposite way.
✅ APPLICATIONS: Suitable for use in home, automotive, nautical, industrial, and commercial applications. Brass elbows are perfect to made air, water, fuel, coolant, gas and oil connections. NOT RECOMMENDED FOR POTABLE WATER USE. Please Note: NPT Size DOES NOT directly correspond to actual dimensions of the thread. 1/2 NPT nominal size works with a 0.84" outside diameter pipe.
✅ HIGH-QUALITY HEAVY-DUTY BRASS: Made completely of solid, durable CA377 forged, machined brass that is barbed from a solid brass stock using the CNC machine center. High quality deep threads will prevent leaks and corrosion. These pieces are ultrasonically cleaned before leaving the factory, so their surfaces do not have any metal shavings and dust, and no organic oil adheres to the surface. This pipe fitting provides full and secure flow and withstands high pressure..
✅ 100% MONEYBACK GUARANTEE: We offer 100% money back guarantee with no questions asked. This great product also comes with 10-year warranty for quality related issues. Purchase with confidence and enjoy our risk-free offer.

Check Stock

IBOSAD Copper Tube Fittings Hydraulic Pipe Crimping Tools with 1/2 inch,3/4 inch and 1 inch Jaw Copper Pipe Propress Crimpers Pressing Pliers,Suit for Narrow Space and Tee Fitting

The body made of aluinum alloy,Effectively prevent oil leakage.
The head can be 350 degrees Rotatable,be Portable Use.
Compatible with Viega Copper,Pro-Press,Elkhart,Conex Pipe Fittings.

Check Stock