ReviewsOil Pressure Switch Solenoid

mistcooling Misting Fan Kit-18” Fan with 1500 PSI Misting System-Residential, Restaurant and Industrial Misting Pump – High Pressure (White Color) (6 Fans 18\ White)

  • Base Fan Mist Kit Includes: 1 - 18'' High velocity 3 Speed Fan with 4 Nozzle Stainless Steel Ring 1- 1500PSI High Pressure Pump with Solenoid, Pressure Switch and Filtration 1- 25ft Roll of Flexible HP Tubing 1/4'' 4- Ultrafine, Anti-drip Brass/Stainless Steel Misting Nozzles - Stainless Steel Mounting Clamps and All necessary fittings for easy DIY installation..
  • - 110v AC (Available in 12vdc and 220v on request).
  • - Supports up to 8 Fans FAN Features: - UL 507 certified for outdoor us e - High Velocity (Air throw up to 20 feet) - Corrosion resistant finish – 9ft pre-wired 3-prong plug for 120VAC - 6400 CFM, 1/10HP,.
  • 1.4 Amps - Quiet operation - Totally enclosed, maintenance free high-performance motor with thermal overload protection - Stainless Steel 4 Nozzle Mist Ring, all kits come with Black color tubing (we also offer White and Grey Color Tubing) contact us if you wish to get a different color tubing..
Check Stock

Misting Fan Kit - 18 Inch Outdoor Fan with 250 PSI Misting Pump - Stainless Steel Misting Fan Ring (3 White Color Fans)

  • 250 PSI Misting Pump features: 110v AC (Available in 12vdc and 220v on request).
  • Max Output capacity of 250 PSI Supports up to 40 nozzles Easy to hook with any Garden Hose or Faucet.
  • Built in 5 Micron Filtration Built in Inlet Solenoid and Thermal Safety Switch Outdoor compatible fan cooled enclosure with on/off switch.
  • Compatible with variety of timers and controls Powered by Totally Enclosed Pump head and Motor that is MADE IN USA.
Check Stock

AEM 30-3511 Infinity 6/8h Plug in Play Jumper Harness for 2003-2005 Mitsubishi Lancer Evolution / EVO 8 VIII

  • AEM’s Plug & Play harness for Mitsubishi Evo engines includes a Wideband O2 connector, AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, oil temperature and ethanol content sensor..
  • The expansion port also includes a sensor ground, 5v reference, 12v power from relay and high side output for activating a relay or solenoid, a low side output for boost control and analog inputs for mode switch and no-lift shift..
Check Stock

HFS 110v Ac Electric Solenoid Valve Water Air Gas Fuels N/c - 1/2IN NPT Available 110V AC 1/2IN NPT

  • [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
  • [SIZE]: 102mm*62mm (4.016" * 2.44"), thread diameter: 20mm (0.787"), interface pipe diameter: 1 / 2" NPT thread, flow diameter: 16mm (0.63").
  • [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
  • [WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
  • [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 1.2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..
Check Stock

HFS (R) 12v Dc Electric Solenoid Valve Water Air Gas, Fuels N/c - 1/2IN NPT Available (12V DC 1/2IN NPT)

  • [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
  • [SIZE]: 102mm*62mm (4.016 '' * 2.44 ''), thread diameter: 20mm (0.787 ''), interface pipe diameter: 1 / 2 '' NPT thread, flow diameter: 16mm (0.63 '').
  • [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
  • [WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
  • [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..
Check Stock

HFS (R) 12v Dc Electric Solenoid Valve Water Air Gas, Fuels N/c - 1/4IN NPT Available (12V DC 1/4IN NPT)

  • [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
  • [SIZE]: 74mm * 39mm (2.91 '' * 1.535 ''), thread diameter: 12mm (0.47 ''), interface pipe diameter: 1 / 4 '' NPT thread, flow diameter: 2.5mm (0.098 '').
  • [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
  • [WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
  • [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..
Check Stock

FAERSI 2 PCS VANOS Engine Variable Timing Oil Control Valve Solenoid VVT 11367585425 Replacement for BMW VANOS 328i 328xi 323i 325i 330i 528i 530i 335i 525xi 535i 540i X3 Z4 2.0L 2.5L 2.8L 3.0L

  • ..., 11367516293, TS1046, Direct Replacement for the factory camshaft position actuator solenoid, easy to install.
  • Variable Valve Timing Solenoids locates on the cylinder head to control the position of the camshafts, move the Intake or Exhaust camshafts to an advanced or retarded position by changing the supply of oil pressure to the camshaft, depending on the speed and load of the engine.
  • This Oil Control Valve Solenoid ( OCV Solenoids) can FIX /TURN OFF Check Engine Light (CEL) error codes P0010, P0013, P0011 & P0014, Improve Poor Fuel Economy, Realize Superior Emissions Control, Better Power Delivery for Everyday Needs.
  • Variable Camshaft Timing VCT Solenoid Fit 00 01 02 03 04 05 06 07 08 09 2010 2011 2012 2013 BMW w/ Vanos Engne, Meets or Exceeds OE Specifications, Meets OEM specifications, Easy to Install and Clean, Fast Response, High durability. Buy with confidence, If you have any question,Please simply contact us for a replacement.
Check Stock

Exhaust Camshaft Position Actuator Solenoid - Variable Valve Timing Solenoid | Replaces# 12615873 12602516 | for Chevy Trailblazer Colorado GMC Envoy Canyon Buick Rainier Isuzu & more

  • OEM FIT: The cam solenoid is manufactured as an OE product to ensure proper alignment of mounting brackets and verify electrical connectors fit....
  • PREMIUM QUALITY: This exhaust solenoid valve utilizes aluminum valve bodies and spool valves that are surface-treated to create micro finished sliding....
  • FITS: With 4.2L, 3.7L, 3.5L, 2.9L or 2.8L engines| 2002-2009 Chevy Trailblazer, 04-12 Colorado | 2004-2012 GMC Canyon, 02-09 Envoy | 2003-2008 Isuzu....
  • REPLACE OEM PART NUMBER: 12615873, 12602516, 12568078, 12576768, 12597025, 8125680780, 8125767680, 8125970250, 8126025160, 8126158730, 917-010. Fixes....
  • 12-MONTH WARRANTY: Oil flow rate, pressure and leakage are tested on every unit to guarantee long-term dependability. If the vvt control solenoid....
Check Stock

mistcooling High Pressure Misting System 1500 PSI - Flexible (60 Feet - 20 Nozzles)

  • Features: Base 20 Nozzle Kit Contains: - 1 - Max1500 psi High pressure pump with built-in water on/off valve, low water cut off switch, pressure bypass, commercial 5-micron filtration, Outdoor Rust Proof Enclosure with on/off Switch.
  • - 60ft 1/4" Nylon Tubing-Black - 20 - HP Push Lock Misting Tees.
  • - 20- Stainless Steel Orifice Nozzles (0.006") - 1 - Push Lock End Plug - 2- Nozzle plugs - 2- Replacement Nozzles - 1- Drain Valve Assembly - Stainless Steel Mounting Clamps.
  • Specs:1500 PSI Misting Pump: 0.15 & 0.30 GPM - For up to 40 Misting Nozzles - Pressure Adjustment Valve to allow increase or decrease of the outlet water pressure. - Pump pre-set for ideal working - Solenoid Valve – controls flow of water in the misting pump - Pressure Switch or no cut off water switch will turn pump off, if no water supply - Thermal Safety Swithc - Maximum Speed 1800 rpm - Full load Amps. (0.15/ 0.30 gpm.) 1.38/ 2.00 Amps - Noise level: 75 DB - Maximum Inlet Pressure–100psi.
  • Filter: - 5 Micron Filter - Filter in the package comes with 3/8 inch inlet- outlet fitting. - Standard pump comes with ¼ inch push lock type fitting.
  • However, it is placed on 3/8 inch male and ¼ inch female adapter. - Outlet comes with ¼ inch fitting as standard.
Check Stock

MPC Train Truck Air Horns Dual Loud Locomotive Complete Kit

  • ✅ Oversized Dual Chrome Train Horns (17" & 13" Trumpet Length) w/ 12v Solenoid.
  • ✅ 120 PSI Sealed Air Compressor w/ Remote Intake (Dimensions: 7.5" x 2" x 4.5").
  • ✅ 1 gallon Air Tank w/ 5 x 1/4" NPT ports (Dimensions: 7.75" x 5.75" x 8").
  • ✅ Kit includes a pressure switch (90 PSI on/120 PSI off), 12 ft of 1/4" air line, push button switch, all necessary tank fittings and mounting....
Check Stock

ZRDR Co2 Generator System 2L with Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Aquarium Plants，Stable Output Sent Steel Bottle Base

  • [Professional Factory]We are a manufacturer specializing in aquarium co2 systems. Our co2 generator for aquarium plants is made of 304 stainless steel, far better than a simple plastic bottle generator, more durable, stable, safe, and high pressure resistant.
  • [Safety First]Automatic pressure relief valve, when the pressure of the inside co2 steel bottle exceeds 30KG will automatically release pressure. 12V Waterproof solenoid valve，Keep away from the danger of water leakage from the solenoid valve, protect your safety.
  • [Refine The Bubbles]Our co2 aquarium kit is equipped with the atomizer, refine the bubbles and make them easy to dissolve in water and be absorbed by plants, keeping your aquarium full of vitality. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • [Low Cost]You only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the bottle runs out, you only need to purchase the material again.
  • [Complete Accessories]Steel bottle, Stainless steel pressur....
Check Stock