ReviewsOil Pump Adapter

How to build a HUGE STEEL COCK: The BEST and MOST COMPLETE ENGLISH GUIDE.

  • Robinair's VacuMaster Economy Vacuum Pump is designed for air conditioning and refrigeration service.
  • featuring a 2-stage rotary vane design, 7.5 ounce oil capacity, and non-skid feet.
  • 1/3 HP, 115V/60 Hz thermally protected motor.
  • Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life.
  • 1/4 inch MFL & 3/8 inch ACME inlet fittings, 3/8 inch FFL x 1/2 inch Acme adapter, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining.
Check Stock

OEMTOOLS 24937 1.5 Gallon 6 Liter Pneumatic and Manual Fluid Extractor Manual and Pneumatic Oil Extractor Fluid Vacuum Extractor Vacuum Evacuator

  • Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid....
  • Double Duty: For pneumatic extraction, insert the suction hose in the engine oil extractor receiving hole.
  • Manually suction fluid with the engine oil....
  • Don’t Cry Over Spilled Oil: The 1.5 gallon reservoir is a solid one-piece tank that can't leak out the bottom.
  • Time Flies: Draining oil from beneath a vehicle takes eons.
  • The oil pump extractor's 5 foot hose and dipstick adapter extracts automotive fluid....
  • Under Pressure: Change transmission fluid anytime with the pneumatic and manual pumping options.
  • This fluid extractor pump works at 85 PSI and a max....
Check Stock

Qwix Mix Windshield Washer Fluid Concentrate, 1 Gallon Makes 500 Gallons - 100% Biodegradable Grime & Dirt Remover, Superior Commercial Grade Glass Cleaner, Single…

  • 6AN to 12mm Banjo fitting - Hose end adapter ( M12-AN6).
  • Compatible with 3/8 regular or 6AN braided hose.
  • Suitable for all fluids - Fuel, oil, coolant, water, air, etc...
  • Adapter for fuel rail, fuel filter, fuel pump, oil coolers, etc....
  • What's in the box: (1) Banjo adapter (2) Washers.
Check Stock

Orion Motor Tech Vacuum Chamber with 3.5cfm Pump, 1.5 Gallon Vacuum Chamber Kit and 38 Micron Vacuum Pump Epoxy Resin Kit, 5.7L Vacuum Chamber with Pump for Casting Degassing, Oil Incl.

  • ...s needed to quickly, easily, and safely handle removing air and other gases from resin, epoxy, oil, and other solvents (Cannot Be Used on Wood).
  • 3.5CFM VACUUM PUMP: This set's single-stage rotary vane pump is powered by a 0.25 hp all copper motor to keep your degassing humming along.
  • with its dual ports and included adapter, it also works with HVAC gauges and hoses to draw down car and low-tonnage AC systems to as low as 37.5 microns (5 Pa).
  • 1.5 GALLON CHAMBER: The vacuum chamber is constructed from brushed 201 stainless steel for superior durability and resistance to pressure, corrosion, and heat up to 248°F.
  • the transparent acrylic lid and provided gauge allow easy monitoring at every stage of the degassing process.
  • and a non-skid pad prevents noise and rattling during use.
  • HELPFUL ACCESSORIES: This vacuum pump and chamber set comes with the system's necessary lubricating and absorptive oil included, as well as a funnel and one-size-fits-most gloves for quick and clean replacement.
  • an adapter allows use of the pump with 1/4", 3/8", or 1/2" HVAC hoses as needed.
  • and a 5 ft. reinforced wire hose and various gaskets, filters and fittings provide a reliable connection between pump and chamber.
  • SATISFACTION GUARANTEED: Order today and get right to work pro....
Check Stock

Robinair 16301 Low Side Tank Adapter - 1/2 Acme Female X Low Side R-134A Male Coupler, Gold

  • Robinair's VacuMaster Economy Vacuum Pump is designed for air conditioning and refrigeration service.
  • featuring a 2-stage rotary vane design, 7.5 ounce oil capacity, and non-skid feet.
  • 1/3 HP, 115V/60 Hz thermally protected motor.
  • Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life.
  • 1/4 inch MFL & 3/8 inch ACME inlet fittings, 3/8 inch FFL x 1/2 inch Acme adapter, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining.
Check Stock

MR HELLO Thread Adapter Straight Fitting 5/8x24 Anodized Aluminum Black Flare Reducer Hose Union

  • Oil Filter Thread Adapter Straight Fitting fit all oil cooler fuel tank fuel pump fluid Line..
  • Flare Hose Union Oil Tank Fitting Fits commonly available filters such as:STP S3600 FRAM PH33600 Purolator PSL30001 NAPA 4003 WIX24003.
  • Fitting Size:Female 5/8-24 to Male 3/4-16 13/16-16 3/4 NPT.
  • Materia:these Automotive Threaded Adapter is made of aluminum 6061.
  • NPT threads creates a seal by a wedging action.It is a tapered threads and can give an effective seal for pipes using hydraulic fluids..
Check Stock

Vevitts Engine Oil Pump, Portable Electric Self-Priming Motor Oil Pump for Car Motorcycle and Boat Engine Oil Transfer Change Pump 12V 100W

  • ... 【EASY TO USE】 Oil fluid extractor is easy to install, easy to use, small in size, light and portable, easy to store and carry to any place you want. No special tools required, needn't warm engine oil up. Just fix the two clips on the battery power supply, connect 2 inlet hoses(6mm,8mm) by adapter, fix outlet hose(10mm) on the outlet by yellow clamp, and turn the power on..
Check Stock

6 Pieces 6015 R134A Brass Refrigerant Tank Adapter to R12 Fitting Adapter 1/2 Female to 1/4 Male Flare Adaptor Valve Core and 6014 Vacuum Pump Adapter 1/4 Inch Flare Female to 1/2 Inch Male

  • You will receive: 3 sets are total of 6 pieces, including 3 pieces 6014 vacuum pump adapter and 3 pieces 6015 R134A refrigerant tank adapter, more....
  • Practical adapters: these tank adapters are as charging and service tools, can be applied to vacuum pump, can tap or oil injector to adapt between....
  • Function feature: these tank adapters provide a tight, secure, leak-free connection that allows you to quickly and easily connect and disconnect high....
  • Solid brass construction: these tank adapters are made of solid brass, sturdy to use, corrosion resistant, not easy to rust, you can use them for a....
  • Size details: the size of 6014 vacuum pump adapter is approx. 2.6 x 1.6 x 4.4 inches, the size of 6015 R134A refrigerant tank adapter is approx. 2.6 x....
Check Stock

DEKOPRO Submersible Water Pump 1/4 HP 1850GPH Thermoplastic Utility Pump Electric Portable Transfer Water Pump for Pool Tub Garden Pond Draining

  • ...ped with two skeleton oil seals and one mechanical seal, which is more reliable. This submersible pump impeller blade also features a highly corrosion-resistant impeller that automatically adjusts to speed and fluid viscosity to ensure a long service life..
  • 【PROFESSIONAL ADAPTER】With 3/4" garden hose adapter. 1-1/4" NPT discharge, you can use different sizes of hoses depending on the flow. Features a removable bottom screen that filters debris, protects the pump from damage, and removes water to 1/5" of the surface..
  • 【WIDE APPLICATION】 Submersible pump can be operated easily by plugging into the power supply. Suitable for flooded areas, swimming pools, cellars or garden ponds. Great to drain water from those areas. It is also great to pump water for garden irrigation or cleaning your yards or roads..
Check Stock

Goplus 1/3HP 4CFM Single Stage Rotary Vane Vacuum Pump and R134a Manifold Gauge Set, HVAC A/C Refrigeration Kit, Including Vacuum Pump, A Bottle of Vacuum Pump Oil, Suitable for R12, R22, R134

  • ...he HVAC service gauge set is excellent for diagnosing and repairing AC systems. The manifold comes with oversized sight-glass for easy viewing the refrigerant flow, and the high-quality gauge ensures high accuracy of the reading. It’s ideal for R12, R22, R134, and could be suitable for R410a after configuring the adapters. It does not include the adapter, but you can easily buy it locally or on Amazon..
  • 【Three-Color Coded Hoses】There are yellow, blue, and red hoses, each equipped with brass fittings. The fittings are 45 degrees on one hand and straight on the other, providing a leak-proof seal. The three hoses are 36" in length. All hoses comply with the SAE-J2196 standard. The working pressure of the hoses is 800PSI - 4000PSI and its acceptable refrigerant are CFC, HCFC, and HFC..
  • 【A Complete Refrigerant Tool Kit】This tool kit is a complete set for Mini-split/ HVAC and AUTO AC refrigerant recharging, including a vacuum pump, a pressure gauge set, 3 multicolored hoses with length of 36", 2 adjustable quick couplers, 2 adapters, a bottle of vacuum pump oil, a manual for pump and gauge and a portable suitcase..
Check Stock

Vehicle Maintenance Log Book: Car Repair Journal / Automotive Service Record Book / Oil Change Logbook / Auto Expense Diary / Engine Autolog / Automobile, Truck Or Motorcycle Owner Gift Notebook

  • ... 【EASY TO USE】 Oil fluid extractor is easy to install, easy to use, small in size, light and portable, easy to store and carry to any place you want. No special tools required, needn't warm engine oil up. Just fix the two clips on the battery power supply, connect 2 inlet hoses(6mm,8mm) by adapter, fix outlet hose(10mm) on the outlet by yellow clamp, and turn the power on..
Check Stock