ReviewsOil Pump Bracket

GPI - L5132 High Viscosity Oil Pump, 32 QPM, 230AC/115V Oil Transfer Pump for Viscous Fluids That Features a 0.75” Ball Valve Nozzle, 8 Foot Hose, 3 Foot Power Cord with Three-Prong Plug (142100-02)

  • DURABLE ALUMINUM HOUSING: Our gear oil transfer pump is for high viscosity fluids and lubricants. Engineered with the lightweight cast aluminum housing and gerotor gear design, our oil extractor pump ensures long life and minimal maintenance. With the rugged 230/115-volt AC motor, our oil pump delivers a flow rate of 8 GPM or 32 QPM (30L/min)..
  • HEAVY-DUTY OIL PUMP: The L5132 is specially designed for use with new oil (up to 90 wt), waste oil, hydraulic fluid, antifreeze, or other non-flammable oil-based solvents. Our high viscosity pump is highly productive when used to pump drums, bulk tanks, waste oil reserves, and other oil containers. Modeled to fit easily to a barrel or drum, this oil extractor quickly transfers all incombustible liquids!.
  • EXTENDED MOTOR LIFE: The smart thermal protection design extends the motor life of our heavy-duty oil pump with the versatility to handle a variety of fluids without the risk of overheating. The weight centering inlet base of the pump reduces the tank stress and the pressure relief valve offers the easy strainer access..
  • EASY-TO-USE: Accompanied by a pre-installed 3 foot power cord with a three-prong grounded NEMA plug, this oil pump greatly reduces assembly and installation time. The pump includes an 8 foot long....
Check Stock

THINKWORK Oil Pump Extractor, 12V 80W Marine Oil Change Pump and Electric Oil Pump, with Overheat Protector for Boat, Car, Speedboat, Motorcycle

  • SAFETY&OVERHEATING PROTECTION-Except engine oil, diesel oil and coolant, the oil pump must not pump any flammable liquid or water to avoid accidents. Before use, be sure to heat the car engine to 104°F-140°F for about 15 minutes to avoid clogging the oil pump due to the solidification of the oil. When the oil pump is overheated, the newly added overheat protection device will automatically cut off the power supply. At this time, please check whether the hose is blocked or the oil is too sticky..
  • QUICK OIL CHANGE - DC 12V 80W has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow: 1.5L / m, oil flow 0.3L / m)..
  • UPGRADED OIL PUMP-Everyone needs a portable and small oil pump, simple operation does not need to spend too much time for practice, widely used in motorcycles, scooters, ships, quad bikes, trucks, ships, forklifts, power generation machinery, tractors , Lawn mowers and various machinery to change the oil..
  • ACCESSORIES & PRECAUTIONS - The oil pump has 1 outlet hose, 1 inlet hose, 2 hose locks and 2 battery clips. Please pay attention to the ....
Check Stock

Lawnmower

  • ❥❥❥ Widely Application: It is great for pumping fuel oils, petrol, diesel, lubricating oil, cooking oils and many other oils. BUT DO NOT pump....
  • ❥❥❥ Main Function: With this hand crank pump, you can pump oil quickly and easily from barrels and oil drums and small tanks. Keep this pump in....
  • ❥❥❥ Use Tips: Add some oil that requires pumping into the pump to prime it before you start to pumping oils. Lubricate the pump with grease is....
  • ❥❥❥ Specifications: Main Material: Aluminum Alloy. Inlet Diameter: 3cm / 1.18in. Outlet Diameter: 2.5cm / 0.98in. Length: 124cm / 48.81in.....
Check Stock

Mini V8 Engine Model Kit That Works Run, STEM Hobby Toy Building Kit for Kids & Adults with DIY Guide & Realistic Parts, for AX90104, SCX10, Capra, VS4-10 Pro/Ultra Model Car

  • ...s such as AX90104, SCX10, Capra, and VS4-10 Pro/Ultra. Installing this engine will make your remote control car unique and powerful, but it is also a great decoration to exercise the ability to assemble and restore the V8 engine..
  • Tips: This engine kit does not contain the bracket, you can choose the corresponding engine bracket according to your model. The engine and the bracket are sold simultaneously. for your children with this intuitive and engaging kit! It makes science, mechanical engineering, and even technology exciting from start to finish!.
Check Stock

TERA PUMP Portable Power Water / Fuel Transfer Battery Pump with Auto-Stop Sensor ( 2.4 GPM )

  • Upgrade 55 Gallon Drum Pump: 32mm Larger Oil outlet tube diameter for quicker oil transfer, Oil outlet pipe length 39 Inch, Overall Length 51 Inch, that can be adjusted to fit 15 - 55 gallon drums..
  • Heavy Duty Barrel Pump: Constructed with Aluminium alloy Steel, heavy duty & rugged, anti-corrosion and anti-rust for more durability..
  • Leak-Free Oil Pump: Our barrel pump is consisted of 3 piece segmented suction tube with screw thread, good sealing effectively prevent oil leakage..
  • Easy to Use Hand Pump: Great Filter at the bottom of the suction tube separate the oil and the oil dirt effectively. Hand Drum Pump Flow Rate 200-250ML (About 16 GPM ) . Support clockwise direction rotary..
  • Widely Used: This rotary barrel pump is suitable for pumping gasoline, kerosene, oil, diesel, hydraulic fluid lubricating oil, other non-corrosive liquids, NOT use for water!.
Check Stock

High Volume Oil Pump Replacement - Compatible with 4.8L 5.3L 6.0L Silverado, Suburban, Tahoe, Trailblazer, GMC Sierra, Yukon, Cadillac Escalade - Replace M295HV

  • REPLACEMENT HIGH VOLUME OIL PUMP - If you have an engine that can rev beyond 6,000 RPM or higher, a high performance or high volume oil pump would probably be a good upgrade and provide added lubrication insurance..
  • FIT THE FOLLOWING VEHICLES - High volume & high pressure oil pump compatible with 4.8L 5.3L 5.7L 6.0L GM Vortec V8 engine oil pump, induding Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier, model year 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020..
  • REPLACE PART NUMBER - Replace GM 12696357 12586665 oil pump, replace Melling M295HV oil pump. Commonly found on Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier with 4.8 5.3 5.7 6.0 V8 Vortec Engine..
  • OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine GM or Melling high volume oil pump, but it works even better and lasts longer. Save yourself times and money by replacing high volume oil pump yourself..
Check Stock

Oil Transfer Pump Extractor, Electric Oil Pump Fast Oil Change Transmission Fluid Extractor Pump, 12v 60w Diesel Fluid Scavenge Suction Pump for Changing Oil, Boat, Tubes, Truck, RV, ATV, Riding Mower

  • QUICKEST, CLEANEST OIL CHANGE EVER! - Oil Pump for Oil Change. Helps bleed diesel engines after filter change essential tool. Suck up to pump, good to go! Just get the motor warm. Turn it off and turn on the oil pump extractor. Its that easy. It drains to the last drop. Makes your oil changes that much quicker and cleaner. Worked great to suck out old brake fluid, differential fluid, gear oil, transmitting fluid..
  • POWERFUL SUCTION OIL FUNCTION- This high efficient battery powered oil extractor pump is easy to pump various fluids and oils. Easy to put together, all the hoses came with it. You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery, ran the small hose down the dipstick tube and turned it on, and press the button. Simple On/Off Power Switch, easy to use. Great for a quick oil change..
  • DIFFICULT OIL EXTRACTION NO MORE - The 12v Oil Change pump extractor are very easy to use and makes a top down oil change so easy. Ideal diesel fluid oil transfer pump extraction equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore..
Check Stock

Jabsco Hotshot HD4 Kit - 12V 4GPM 60PSI Heavy Duty Washdown Pump w/25' Hosecoil

  • This high efficient fuel pump is an Perfect equipment for quick and clean oil-changes.It works great for pumping engine oil, crude oil and heating oil..
  • TSuitable for Oil crude oil Extractor used in motorcycles, caravans, cars, quads, industrial, water purification &treatmentequipmentvehiclecleaningagriculturalsprayingetc..
  • With handheld pump of Rotary Barrel Pump, more easily and safely to clean oil-changes. Built-in bypass valve and filter, easily accessible for cleaning oil pump..
  • Be widely used to draw water in yacht, fishing-boat, industry, etc.Fully automatic bilge pump, no separate float switch is needed..
  • Stainless Booster Water Pump/Electric Water Transfer Pump designed to transfer water from tanks, pools, rain barrels, and groundwater. Easy to set up and let it drain away from the accumulated water, ideal for both in-ground and above-ground pools..
Check Stock

Pawfly Mini Aquarium Air Pump for 3-20 Gallon Nano Fish Tanks 15 GPH Oxygen Aerator Pump with Bracket Airline Tubing Air Stone Control Valve and Check Valve Accessories

  • Easy Installation: Pass the lower column of the bracket through the pump hook, then clip the bracket on the wall of fish tank and rotate the knob to fasten the pump tightly..
  • Compact & Light: Measures 3.1" L x 2" W x 1.5" H and weighs 4 oz. Perfect size for aeration in 3-20 gallon tiny fish tanks or DWC buckets to keep your fish healthy..
  • Steady Output: Max air flow rate: 15 GPH.
  • Power: 1 W. A strong aerator which withstands long-time use to promote oxygen supplement constantly..
  • Quiet Aeration: With a soft silicone bracket base and 4 shockproof rubber feet to greatly minimize vibration, it reduces noise to less than 35 dB like whispers in a quiet room..
  • Pump Accessories: Include a bracket, 6.5-foot standard airline tubing, an air stone, an air control valve and a check valve. All build the basic aeration setup in your fish tank..
Check Stock

ELEAD 500cc Oil Extractor Pump, Oil Transfer Pump, Fluid Extractor, Fluid Syringe Extractor, Car Vacuum Fuel Transfer, Siphon Pump for Gasoline Hand Cleaner for auto Mechanics

  • [The Application of Fluid Extractor ] Fluid Pump is used to extract and replace mechanical fluids such as transmission fluid, antifreeze, power steering fluid, gear oil, and brake fluid from ATVs, cars, boats, trucks, RVs, lawn mowers, golf carts and other vehicles..
  • [The Accessories of Oil Extractor ] Gear Oil Pump includes:1 clear liquid syringe with locking adapter, 2 extension tubes (length 8" diameter 1/4" and length 8" diameter 3/8" and locking cap at the end of the hose). gear oil pump extending transmission fluid pump'service life..
  • [The Materials of Liquid Transfer Pump ] Oil Pump Extractor uses new quality eco-friendly materials for strength, sealing and durability. It is also removable for easy cleaning and maintenance..
  • [Easy to Use Oil Transfer Pump ] Insert the hose into the adapter,can be locked,press the black button to easily remover the hose. extended syringe hose helps draw or inject liquid easily..
  • [The Packaging of Oil Pump ] Oil Change Pump with exquisite color box , bring you high-end beautiful visual experience, can also be as a....
Check Stock

Raijintek ANTILA D5 RBW Tube and Reservoir Combo

  • Free standing Pump and Tube Reservoir Combo.
  • Support bracket provides sturdy, reliable and friendly installation.
  • Easy mounting and connection in multiple locations.
  • Dimension [W×H×D]: 87.4 × 281 × 91.2 mm (with bracket).
Check Stock