ReviewsOil Pump Check Valve

HEYTUR Inflatable Boat SUP Pump Adaptor Standard Schrader Conventional Air Pump Air Valve Adapter Spoke Plate Attachment(Black)

  • ...g, the standard valve for car and bicycle tires..
  • It works on the majority of inflatable stand up boards. It is also suitable for boats and kayaks which also use the Halkey-Roberts valve for inflation.Use your compressor or tire pump to easily reach 20 PSI.Be very careful not to over inflate your board or craft, and check the board's pressure frequently..
  • This is an adaptor only. The speed at which your board inflates will depend on the pump used.Because the compressors/tire pumps take time to inflate, it is recommended to inflate the board by hand hand pump until it becomes difficult to pump, and then use the adaptor to top off the pressure..
  • Remove your SUP valve cap and ensure that the valve is sealed for inflation by rotating the central pin into the outer/closed position.Insert the valve adapter into the SUP valve the same way as you would insert the pump hose nozzle. Connect any standard schrader pump to the valve adapter fitting to inflate your board. Monitor board pressure frequently while inflating!.
  • If you have any problems, please contact with us directly. Simply e-mail us the problem, the solution will be provided in the least time..
Check Stock

PIILOO High Pressure Oil Pump HPOP Master Service Kit with O-Ring Seals & Base Gasket Compatible with Ford Powerstroke 7.3L 1994-2003 and Navistar DT466 & T444E 1995-2004

  • APPLICATION–Perfectly compatible with Ford Powerstroke 7.3L 1994-2003 and Navistar DT466 & T444E 1995-2004. (Part Numbers ISK635, ISK617, ISK795, and TL3).
  • MATERIAL–High quality rubber material o-rings seal and high standard fittings and gaskets, durability, anti-wear, anti-tear, leakproof, corrosion resistance, and longer service life..
  • FUNCTION–A complete tool kit prevents oil leakage and help replace all seals and o-rings on the high-pressure oil pump, and reinstall the pump correctly..
  • KIT CONTAINS–2-Discharge port O-rings / 1-Rear Port Plug O-ring / 1-Non-Serviceable Port O-Ring / 1-IPR Valve O-Ring / 1-IPR Nut / 1-Fill Plug O-Ring/ 1-Non-serviceable port long threaded repair plug / 1-Replacement Check Ball / 1-5ml Thread Sealer / 2-Diesel High Pressure Oil Pump STC Fittings / 1-STC Quick Disconnect Tool / 1-High Pressure Oil Pump Mounting Gasket..
  • SATISFACTION–Goupgo offer 100% brand new and high quality High Pressure Oil Pump Service Kit to every customer. If you are not satisfied with the item, simply return it for a full refund within 30 days. Don’t hesitate to contact us if you have any questions..
Check Stock

Troy Bilt Complete Pump Head Assy for RMW and SRMW Pumps AR42518

  • ...features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
  • Skip the Oil Change: This pump features a maintenance-free crankcase so you never have to change the oil. It is manufactured from fully anodized die-cast aluminum for protection against corrosion.
  • Extended durability: A Thermal Relief Valve (TRV) protects the pump from overheating while in bypass mode. The TRV releases small amounts of hot water and intakes cooler water to prevent overheating and extend the life of the pump.
  • Get the right pump for your machine: this pump is designed for gas-powered pressure washers with horizontal engines. Its SAE bolt pattern, hardware, and standard connections make it a great fit for many brands and models of power washers.
Check Stock

Maxmoral 10PCS Plastic One Way Air Pump Check Valves Non-Return Aquarium Fish Tank Air Pump Stop Valve Accessories Black

  • Made of high quality material,durable,not easy to aging,ensure long service life..
  • Function:Protect you air pump by preventing aquarium water from back siphoning during a power outage..
  • Easy to install,the check valve can be used for most aquarium air pumps..
  • Great one way check valve for aquarium air pump,effective protection for your air pump,can be equipped with your fish tank for a long time..
  • Package included:10pcs Black Aquarium air pump check valves..
Check Stock

attwood Sahara MK2 800 GPH 12-Volt Automatic Bilge Pump

  • 800 GPH, 12V, Fuse size: 4A, Outlet type: 3/4" & 1" barbs, Check valve: yes, Wire length: 29 1/2".
  • The easiest, most reliable automatic bilge pump ever designed.
  • The only automatic bilge pump that eliminates air-locks, Patented X-Air Impeller ejects trapped air in the pump and pipework.
  • Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation.
  • Single-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat’s hull.
  • Universal Backwards Compatible Design: 7-pump mounting hole pattern for replacing any top bilge pump in its category.
  • SteadySwitch: Buoyancy control reduces cycling, draining the bilge not the battery.
  • No Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridge.
  • Improved Motor Cooling/Heat Dissipation: Prevents overheating that may cause failures, such as blown fuse, leaking, etc..
  • Includes straight outlet and check valve.
Check Stock

Sink Soap Dispenser Extension Tube Kit 47' with Check Valve, No Need to Fill The Little Bottle Again!

  • MAKE YOUR LIFE EASIER: With 47" sink soap dispenser extension tube kit, use the big bottle directly, no need to refill small bottles anymore..
  • HIGH QUALITY: Food-Grade silicone soap tube is soft and elastic, check valve make it easier to pump out the soap..
  • EXCELLENT DESIGN: We supply 4 multiple caps to fit most soap and lotion containers. A check valve and pp ball keep soap primed at the top of the tube!.
  • EASY TO USE: With the long hose, skipping the messy process of refilling the soap dispenser. The check valve and pp ball will keep soap always primed in your soap dispenser, so you don’t waste time pumping..
  • WHAT YOU GET:4 bottle stoppers to fit most soap containers, a check valve connect two tubes, a pp ball and 2 fastening bolts.NO SOAP DISPENSER PUMP INCLUDED..
Check Stock

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • ..." Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
  • This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", One - 5/16" 18 x 3 1/2".
Check Stock

The Enchanted Files: Cursed

  • 【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
  • 【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
  • 【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
  • 【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
  • 【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..
Check Stock

Promare [Blu-ray]

  • 【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
  • 【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
  • 【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
  • 【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
  • 【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..
Check Stock

Lincoln 1335 Heavy-Duty Lever-Action Fluid Transfer Pump for 16- to 55- Gallon Drums 8.5 Fl Oz Per Stroke Adjustable Two-Position Handle for Pumping Low- to High-Viscosity Fluids

  • VERSATILE - The 1335 fits 16- to 55-gallon (60- to 205-liter) drums and includes a telescopic suction tube..
  • PERFECT FOR MULTIPLE FLUIDS - The pump is compatible with the following fluids - motor oil, transmission fluid, gear oil, fuel oils, engine coolant, diesel, kerosene and hydraulic oil..
  • STANDARDIZED - This lever-action pump fits all standard 2-inch bung openings and includes an integrated bung opening tool in the pump head..
  • CONSTANT PRIME - The internal check valve assures constant prime..
  • HEAVY-DUTY CONSTRUCTION - The steel construction includes brass rings for proven durability and expanded fluid compatibility..
Check Stock

3600 PSI Power Pressure Washer Water Pump 2.5 GPM 3/4 Shaft for Honda GX200

  • The ROP Shop replacement Horizontal Triplex Pressure Washer Pump.
  • Specs - Maximum Pressure: 3600 PSI, Maximum Flow: 2.5 GPM, Maximum Pump Speed: 3500 RPM. Maximum HP: 6.5 HP, Male Outlet: 22mm Threaded, Standard....
  • Includes - (1) Horizontal Triplex Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Oil Reader.
  • This pump mounts horizontal and MUST have the oil dip stick pointing up when mounted. Pump needs at least 6.5HP to handle PSI. Pump head CANNOT be....
  • Replaces most pumps with 3/4" shaft. The 4-bolt mounting pattern is 2 9/16" center to center.
Check Stock