ReviewsOil Pump Gear Set

JoyFans 10L Pneumatic Transmission Fluid Pump Extractor and Dispenser, Gearbox Oil Transfer System Refill Fill Evacuator Tool Kit with 15PCS ATF Adapters for Most Garage Shop Vehicles

  • Not limited to ATF Fluid: JoyFans 10L fluid transfer pump works with a variety of automotive non-corrosive liquid at low concentrations: Differential fluid, gear oil, power steering fluid, engine oil, gearbox oil, lubricating oil, brake fluid, coolant, etc. If it's used for ATF oil, 15 optional ATF adapters are well kept in a blow-molded case at your fingertips. All parts in this fluid evacuator and dispenser tool set are designed to transfer fluids fast and safely..
  • Handsfree Pneumatic Helper: This transmission fluid pump will keep you away from boring laborious manual work with air compressors. Two-way extractor & dispenser tool saves energy and time.
  • Don't even need to pour oil manually! You only need to switch the extract or dispense mode and buckle the self-locking device. Large capacity avoids the trouble of repeated refueling and satisfys refueling needs of multiple vehicles at once. Quick and sparkless..
  • 3PCS 1M Hoses: O.D. 6mm 8mm 10mm. Connect both ends of the 80'' hose with quick coupling to pump and the selected nylon hose first. They make the pump more suitable for various makes and models. The blue knob must be consistent with the air control switch valve: Extract or Dispense. The 1M nylon hose can be inserted into the car oil contai....
Check Stock

TuhooMall Fluid Extractor Syringe Pump,200cc Fluid Extractor,Fluid Extraction and Fill Pump,200cc Fluid Extractor Filling Syringe Pump Manual Suction Vacuum Fuel Car Automotive Transfer

  • Fluid Extractor and Filler:Filling/Extracting Pump is designed to remove and fill brake fluid, anti-freeze, gear oil, power steering fluid and more..
  • Lock Design: 200cc extraction and fill pump,just push the hose into the end of the pump and it is locked into place automatically. So you never have to worry about it pulling off or blowing off when you use the pump to fill things..
  • Include:The extraction and fill pump includes two a 7-Inch by 1/4-Inch (outer diameter) hose extension for deep reach and small diameter applications, locking cap on end of hose and a 7.5-Inch/19-Centimeter clear hose..
  • Easy to Use: 200cc fluid extractor syringe pump designed for leak-free extraction of a variety of caustic mechanical liquids. Includes extension syringe hose for easy extraction through filler necks and reservoirs. And it disassembles for easy cleaning and maintenance..
  • Application:This 200CC/200ML/0.21QT/7OZ fluid extractor syringe vacuum pump is designed to be chemical and oil resistant. Ideal for extracting or changing engine oils or fluids in automobiles, boats, farm equipment, industrial gear boxes, motor vehicles, motor bikes, RV's,lawn mowers, golf carts and more..
Check Stock

Vevitts 80w Oil Change Extractor Pump 12V Oil Extractor Pump for Changing Diesel Fluid Scavenge Suction Oil Transfer Pump Kits for Jet Ski, Truck, RV, ATV, Boat (Red)

  • 【Instructions for use】1. Please pay attention to the direction of the inlet and outlet, the positive and negative poles and the locking hose lock before use.
  • 2. Please start the vehicle and heat the engine oil to 40-60 degrees for about 5 minutes, otherwise, the oil change pump may have low suction or get stuck. 3. CAN NOT be used to extract water, gear oil (too viscous) or flammable liquid (fuel, gasoline,kerosene,etc.)..
  • 【Complete Diesel Change Pump Kit】The oil transfer pump is mini but powerful. With 4.6ft Outlet tube & 4ft Inlet tube, the 8.2ft long battery clamps makes the extractor pump kit possible for being used at large range. The 2 hoops are used to tighten the tubes to avoid oil spilling..
  • 【12V 80w Oil Extractor Pump】Oil change pump, a great helper for quick and clean oil changing and transfer, all parameter is verified by multiple test. Diesel Flow Rate: 3.5L/min, Engine Oil Flow Rate(40-60℃): 1L/min, Inlet Tube Length: 1.2m/47.2in, Outlet Tube Length: 1.4m/55.1in, Voltage: 12V, Maximum current: 5A..
  • 【Premium Quality】We use pure copper for motors.Good conductivity, corrosion resistance and rust resistance, effectively avoid leakage or short circuit. Instead of manual operation, it can help you change oil quickly and cleanly....
Check Stock

XMT-MOTO Scooter GY6 50CC To 80CC Big Bore Cylinder For VIP Roketa Taotao Baja Silver

  • 【Cylinder Bore】: 47mm / Non-EGR Cylinder.
  • 【Apply to】: GY6 4 stroke 49cc 50cc 60cc 80cc engine upgrade for most of chinese scooter, atv and go karts.
  • 【Parts included】:GY6 80cc Cylinder Head with 64mm valve, 47mm Bore Cylinder Block, Set of 47mm Piston Assy, Piston, Rings and Wrist Pin, Full Set of Engine Gasket, 6pins CDI, Ignition coil, 4pin AC regulator, relay, A7TC Spark Plug, Set of Intake Manifold and Muffler Bolts, and Exhaust locking ha, Set of 8.5 Gram roller , Rocker Arms, Valve Seals, Oil Pump Assy with Driving Gear, Camshaft, Camshaft chain 82, belt 699*18*30, Chain adjuster, Oil screen, spring, cover and oil seal, Starter clutch.
  • 【Fit to】Roketa, Sunl, Baja, Taotao, Panterra, Redcat Tank Giovanni Wildfire Xtreme Seaseng Qlink Yiben Jonway Jmstar, Vento.
Check Stock

GPI - L5116 High Viscosity Oil Pump 16 QPM 115V/230AC Oil Transfer Pump for Viscous Fluids that Features a 0.75” Ball Valve Nozzle 8 Foot Hose 3 Foot Power Cord with Three-Prong Plug 142100-01

  • DURABLE ALUMINUM HOUSING: Our gear oil transfer pump is for high viscosity fluids and lubricants. Engineered with the lightweight cast aluminum....
  • HEAVY-DUTY OIL PUMP: The L5116 is specially designed for use with new oil (up to 90 wt), waste oil, hydraulic fluid, antifreeze, or other....
  • EXTENDED MOTOR LIFE: The smart thermal protection design extends the motor life of our heavy-duty oil pump with the versatility to handle a variety of....
  • EASY-TO-USE: Accompanied by a pre-installed 3 foot power cord with a three-prong grounded NEMA plug, this oil pump greatly reduces assembly and....
  • 1-YEAR WARRANTY: Built with high-quality parts, this CSA approved hydraulic oil transfer pump comes with a 1-year manufacturer’s warranty that gives....
Check Stock

Mercruiser Engine Oil Change and Sterndrive Gear Lube Maintenance Kit

  • Fits all Mercruiser sterndrive GM engines (except 4.3L V6 without remote oil filter).
  • Includes Water Separating Fuel Filter 35-802893T & Oil Filter 35-866340K01.
  • Includes 2-4-C Marine Grease 92-802859A1.
  • Includes SAE 25W-40 Marine Engine Oil 92-8M0078628 and 92-8M0078627.
  • Includes 3 Quarts High Performance Gear Lube 92-858064K01 with Washers and Gear Lube Fill Pump.
Check Stock

VICRING Fluid Extractor 200CC Oil Extractor Pump Manual Suction Vacuum Made Plastic Automotive Fluid Syringe Pump Car Fuel Transfer 7oz Syringe Type Oil Pump

  • [HIGH QUALITY AND LEAK-FREE]VICRING Oil extractor pump is made of high quality plastic material, which is robust, strong and long-lasting. Fluid extractor exterior has a clear and distinct scale for easy checking of the liquid balance.Oil transfer pump has a capacity of 200cc..
  • [FREE ALL CONCERNS ABOUT CHANGING FUEL] VICRING Oil fluid extractor is designed with a double rubber ring, which is not easy to leak oil. Oil transfer pump is suitable for power steering, coolant, oil change, rear axle rear grease change, and even for transferring high viscosity fluids..
  • [NOT EASY TO FALL OFF]VICRING Fluid extractor interface is designed with a snap so that the extension rod will not fall off easily, and with two extension rods attached, the residual oil at the bottom can be simply pumped out. The back cover of the fluid extractor pump is removable so that the remaining oil inside can be cleaned after use..
  • [EASY TO USE EVEN FOR BEGINNERS] Use the simple syringe-type actions of liquid delivery Oil Extractor syringe bottles (gearbox, brakes, steering, differential extraction dispensers) to quickly and cleanly in and out (extraction or....
Check Stock

SMOTIVEPRO Engine Oil Extractor Pump Brake Fluid Extraction Syringe Vacuum Filling and Extracting Pump Capacity 500CC

  • SUPERIOR MATERIALS:The Syringe oil extractor pump made of high quality, solid, durable material, Built-in dual rubber pads, fit the piston closely to avoids leakage,Thicken wall enhances high strength and provides long service life..
  • Extra tubes and Different Capacity for Choice: Extra tubes make extra length for jobs in hard to reach places and won't have to worry about spillage during use. Different Size Brake fluid extractors provide best Choice on the Capacity:0.5Liter/1.5Liter.
  • Extraction and Infusion of Liquid: Simple syringe-type action using the manual fluid pump can dual-way extract and fill fluid by differential extractor dispenser quickly and easily. Ideal for emptying or filling up the master tank and other reservoirs, extracting brake fluid from the tank and adding new oil before flushing the brake fluid to the brake caliper..
  • Widely Application: Ideal for extracting or changing engine oils or lubricants in ATV's, boats, farm equipment, industrial gear boxes, motor vehicles, motor bikes, RV's, etc. Applicable to engine oil, gear oil, gearbox oil, including chemical resistant oils,brake fluid, diesel fuel, coolants, hydraulic systems and water, etc..
Check Stock

Happybuy 10152 PSI Hydraulic Electric Pump 750W Double Acting Hydraulic Driven Pump 110V 7L Solenoid Pedal Hydraulic Power Pack Cylinder Hydraulic Pump

  • Efficient Motor: Equipped with a single-phase asynchronous motor, 750W, with aluminum shell, this electric hydraulic pump is energy efficient, powerful, and durable. Hydraulic pump working pressure: 2Mpa to 70Mpa. Rotate speed:1400r/min. Flow rate: 0.6L/min - 5L/min..
  • Large Capacity Tank: With a hydraulic pump tank, 7L capacity, the hydraulic power pack is efficient. A visible window for monitoring the inside. The pump uses the 15 - 46 anti-wear hydraulic oil. It features compact size, lightweight, simple structure, and ease of use..
  • Accurate Pressure Gauge: This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the pump is working at any time. From 7Mpa to 70Mpa, you can try slowly and choose the right working pressure you need..
  • Effective Oil Volume: Manage this double-acting hydraulic gear pump by the solenoid valve. The high-pressure oil pipe is of high quality and durability. Control two with double pipes..
  • Various Application: The manual hydraulic pump can be used for a variety of hydraulic equipment, working on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency..
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving.
  • Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount of liquid. Stable base avoids dumping.
  • The main hose is 80" long, with a quick plug on one side to connect the container, and a quick coupler on the other side to connect the dipstick tubes or ATF adapters. There is a ball valve on the quick coupler to control the fluid flow, very con....
Check Stock

YAMAHA 2006-2013 F115 4-Stroke Outboard 100 Hour Maintenance Kit with Water Pump Rebuild Repair Kit, Thermostat, Fuel Filters, Spark Plugs, Trim Tab, Anodes, Lower Unit Gear Lube, Gaskets

  • Fits 2006-2013 Yamaha F115 Outboard 4-Stroke Motor - F115JA, F115LA, F115TJR, F115TLR, F115TXR, F115XA.
  • Inlcudes all OEM Yamaha parts required for 100 Hour Maintenance.
  • Includes FULL Oil Change kit, NGK Spark Plug Set, Water Pump Rebuild Repair Kit, Thermostat & Seal, Anodes, Trim Tab, Power Trim Fluid, Fuel Filters, Fuel Filter O-Ring, 3x Anode Grommet, and Oil Drain Plug.
  • Also Includes full lower unit gear lube service kit.
  • 1 Quart Lower Unit Gear Lube, Drain Gaskets.
  • Please confirm fitment prior to purchase..
Check Stock