ReviewsOil Pump Impeller

Simple Deluxe 1056GPH 276W Submersible Pump With 15' Cord, Water Pump For Fish Tank, Hydroponics, Aquaponics, Fountains, Ponds, Statuary, Aquariums & Inline

#1 has pre-filter included - Pre-filter on the intake prevents debris from entering your pump and extend the life of your pump, max flow rate: 1056 GPH, max lift height 12 feet.
Durable quality - Our polished aluminum oxide ceramic impeller shaft insures long pump life because it is non-corrodible and more than 3 times as hard as stainless steel. Epoxy resin encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts.
Safe & easy - Safe for fish with no exposed copper. Easy to clean with no tools required to disassemble and clean filter/impeller. Our electric cord is waterproof, 18# gauge copper wire, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, abrasion resistant and very good flexibility at all temperatures.
3 size threaded nozzles. 83 inch, 1.06 inch, 1.34 inch) – Please note inline and outlet nozzles has different thread size. The thicker ones are for Inline use and the thinner ones are for outlet.
Versatile - Circulate and aerate the water, making it more attractive to your fish or turtles. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems.

Check Stock

Jebao/Jecod RW Series Wavemaker with Controller (RW-4 RW-8 RW-15 RW-20) (RW-4)

Newest 2020 model with an updated controller.
Unique Control system allows to wave off different types and multiple functions..
Wireless controllers allows synchronized operations among wave makers..
Low Voltage DC Electronic pump with variable frequency provides a safe environment for user..
Easy operation to achieve the multiple sea wave. Easy installation with magnetic base. #1 Check the indicator light on the power supply. Green light means that the controller is working. no light means bad power supply. #2 check the controller, if the controller can't switch mode or speed possible bad controller. #3 Power supply checked, controller checked. but pump not working, please try to re-install the pump impeller to reset the pump. If still not working after re-install the pump impeller possible bad pump motor. #4 Extremely noisy issue - please try re-install or replace the pump impeller or re-install the both side mount basket gasket..

Check Stock

WINGOGO Water Pump Impeller 47-F436065-2 for Chrysler Force Sears Gamerfisher Outboards 9.9-10-12-15-20-25 HP Replacement Montgomery Wards Sea King Boat Motors Parts Sierra 18-8903

Water Pump Impeller Dimensions : Shaft Size: 0.508 inch, OD: 2.244 inch, Thickness: 0.594 inch, Blades 6. Neoprene Water Pump Impeller Plastic Hub as Pictures Showed, Please see the pictures..
Replaces P/N 47-F436065-2 47-F436065-1 47F4360652 47F4360651 Sierra 18-8903. This Water Pump Impeller is replacement for Chrysler Force Outboard..
Replacement for 9.9hp 10hp 12hp 15hp 20hp 25hp Chrysler Force Sears Gamefisher Outboard Boat Motors Engine Parts Cooling System. More Detailed Information Please See Description Below..
Cross Part number Reference 47-F4360652 47F436065-2 47-F4360651 47F436065-1 47-F436065 47F436065. This Impeller Makes Repair and Maintenance of Water Pumps Easy..
Find the Correct Water Pump Impeller for your Boat Motor. It is VERY IMPORTANT to Check your Outboard Model or S/N before Purchase. You can leave us message e.g. your Boat Engine Horsepower, Year, Model or Serial Number. We’re pleasure to help you if you're unsure it..

Check Stock

Water Pump Impeller 369-65021-1 47-16154-3 18-3098 for Mercury Sierra Tohatsu 2HP 2.5HP 3.5HP 4HP 5HP 6HP

Water motor impeller have 6 blades.Height:14.30mm,External Impeller Overall Diameter:33.58mm,Internal Shaft Insert Diameter:10.25mm..
This aftermarket impeller replaces Mercury outboard motor part #47-16154-3,Tohatsu outboard motor part 369-65021-1, impeller 18-3098..
Water pump impeller are 100% brand new and don't used or rebuilt..
Similar in design to stock OEM units and require only simple hand tools for installation.Direct replacement,OE level quality and durability..
Water pump impeller 100% compatible with OE parts and passed TS16949 certified.Fits for Mercury/Mariner (4-STROKE) Carb 2HP 2.5HP 3HP,Mercury/Mariner (2-STROKE) 4HP 5HP,6HP..

Check Stock

Sunnydaze 40 GPH Submersible Electric Pump for Hydroponics, Aquaponics, Small Fountains, and Aquariums, 120 Volts

... has a high quality 5 foot waterproof cord. Comes with adjustable input flow-rate screen. Includes Mushroom and Sprinker style FOUNTAIN SPRAY HEADS, Blossom and Spire sprinkler rings, and 4 EXTENSION RISERS. Risers can be used in any combination to adjust height..
DURABLE QUALITY: Our Polished Aluminum Oxide Ceramic Impeller Shaft and Bearings insure long pump life because they are non-corrodible with hardness more than 3 times that of stainless steel. Epoxy Resin Encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts. This pump incorporates a magnetic wet-rotor design, so there is no seal to fail that would damage the pump motor..
EFFICIENT: Neodymium Iron Boron (NdFeB) Magnets are used in all our electric motors because they are the most powerful permanent magnetic materials commercially available and increase energy efficiency. Water-Lubricated Nitrile Bushings are used because they possess a very low coefficient of friction, have inherent vibration-dampening qualities and are non-polluting..
SAFE & EASY: Safe for fish with no exposed copper and oil free. Easy to clean with no tools required to disassemble and remove the impeller/rotor. Our waterproof SJTW Electric Cord has 18 gauge copper wire, molded....

Check Stock

Alpine Corporation P280 Power Head Pump, 5 x 3 x 3 inches, Multicolor

SUBMERSIBLE FOUNTAIN PUMP: Keeps water flowing in your garden's ponds, cascading water fountains, and birdbaths, and can be used in and out of the water based on your needs.
DURABLE PUMP CONSTRUCTION: Oil-free design with ceramic impeller shafts provide a reliable, long lasting fountain water pump that resists damage and keeps water flowing, and has a GPH of 280.
ENERGY SAVING WATER PUMP: Features an energy-saving design that will save you money, while providing an eco-friendly and efficient water pump system that's good for the environment.
EASY INSTALLATION: 17 watt pump can be used vertically or horizontally with a 1/2" outlet, and includes an attached 16' long cord for easy install in your fountain, pond, or birdbath.

Check Stock

Alpine Corporation Eco-Sphere Energy-Saving 2800GPH Pond Pump with 33-ft. Cord

PROFESSIONAL POND WATER PUMP: Submersible water pump keeps water always flowing and works on land or fully submerged in water. Perfect for ponds, fountains, waterfalls and filtration systems!.
DURABLE PUMP CONSTRUCTION: Oil-free design with ceramic impeller shafts provides a reliable, long-lasting fountain water pump that resists damage and keeps water flowing, and has a GPH of 2800.
ENERGY SAVING WATER PUMP: Features an energy-saving design that will save you money, while providing an over 75% reduction in energy consumption compared to standard pumps.
EASY INSTALLATION: Pump can be used vertically or horizontally for convenient placement in your pond, and has a 33' long cord for easy placement and accessibility.

Check Stock

mistcooling 160PSI Misting Pump (220 V-AC)

Specs: 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push- lock fitting..
Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle..
Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings..
Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75 degree F - UV Resistant Flexible Tubing - Black Color - UV Treated..

Check Stock

Alpine Cyclone 8000GPH Waterfall & Pond Pump 33ft Power Cord PAL8000

professional pond water pump: submersible water pump keeps water always flowing and works on land or fully submerged in water. perfect for ponds, fountains, waterfalls and filtration systems!.
durable pump construction: oil-free design with ceramic impeller shafts provides a reliable, long-lasting fountain water pump that resists damage, keeps water flowing, and has a gph of 8000.
energy saving water pump: features an energy-saving design that will save you money, while providing an eco-friendly and efficient water pump system that's good for the environment.
easy installation: pump can be used vertically or horizontally for convenient placement in your pond, and has a 33' long cord for easy placement and accessibility.
"easy maintenance and ideal size: includes a large pre-filter for easy disassembly and ease of replacement, and pump measures 10"l x 6"w x 7"h for use in ponds up to 33' wide".

Check Stock

Alpine PAC2100 Tornado Pond Pump, 12\L x 7\ W x 7\H, Multicolor

SUBMERSIBLE FOUNTAIN PUMP: Keeps water flowing in your garden's ponds, cascading water fountains, and filtration systems, and is ecologically friendly and energy-efficient.
DURABLE PUMP CONSTRUCTION: Oil-free design with ceramic impeller shafts provides a reliable, long-lasting fountain water pump that resists damage and keeps water flowing, and has a GPH of 2100.
ENERGY SAVING WATER PUMP: Features an energy-saving design that will save you money, while providing an over 70% reduction in energy consumption compared to standard pumps.
EASY INSTALLATION: 144 watt pump can be used vertically or horizontally with a 3/4"-1 1/4" outlet, and includes a 33' long cord for easy install in your fountain, pond, or birdbath.

Check Stock

Alpine Corporation 4000 GPH Cyclone Pump for Ponds, Fountains, Waterfalls, and Water Circulation

PROFESSIONAL POND WATER PUMP: Submersible water pump keeps water always flowing and works on land or fully submerged in water. Perfect for ponds, fountains, waterfalls and filtration systems!.
DURABLE PUMP CONSTRUCTION: Oil-free design with ceramic impeller shafts provides a reliable, long lasting fountain water pump that resists damage, keeps water flowing, and has a GPH of 4000.
ENERGY SAVING WATER PUMP: Features an energy-saving design that will save you money, while providing an eco-friendly and efficient water pump system that's good for the environment.
EASY INSTALLATION: Pump can be used vertically or horizontally for convenient placement in your pond, and has a 33' long cord for easy placement and accessibility.
EASY MAINTENANCE AND IDEAL SIZE: Includes a large pre-filter for easy disassembly and ease of replacement, and pump measures 10"L x 6"W x 7"H for use in ponds up to 33' wide.

Check Stock