ReviewsOil Pump Valve

kweiny Pneumatic Fluid Extractor for Automotive Brake and Clutch and Power Steering Fluid

  • ...or DIY'er: This handy manual oil pump extractor is the perfect design for professional and DIY mechanics to remove the oil easily and quickly and a pour spout is included to help empty containers for recycling the oil..
  • Product Feature: This 6L fluid capacity hand pump is made of HDPE durable material and a shut-off valve for mess-free extraction. More importantly, the fluid extractor's lid is removable to allow for easy recycling of waste fluid..
Check Stock

10000 psi Hydraulic Hand Pump 2 Speed Power Pack Hydraulic Lifting Pump

  • Maximum operating pressure of 10,000 pounds per square inch (psi)，Two-speed Plunger Improves Pump Efficiency By 70%.
  • Advances and releases design for applications with a constantly applied load Pressure relief valve (Oil return knob)helps prevent pump overload, switch( venting nut) on the tail of it avoid sealed of oil box.
  • Oil capacity: 700cc, 2M high pressure hose ，oil pipe coupling with PT3/8 thread.
  • Manual Hydraulic Pump is durable, smooth surface and good sealing performance. Integral Casting Pump Body, Durable, Stable And Reliable.
  • High-pressure hydraulic hand pump for 5 ton to 200 ton hydraulic ram cylinders or split unit hydraulic puller and other hydraulic applications.
Check Stock

12V Electric Transfer Pump 5L DC Transfer Pump, 12V 60W Oil Extractor Pump for Car Marine Boat Scavenge Exchange Transfer Pump Engine Oil Extractor

  • ...th of approximately 5.85 inches and a diameter of 1.85 inches, making it easy to carry and store. Flow vacuum transfer pump is very easy to carry, you can use it wherever you want to use it because of its compact size and handle grip. This pump has self-priming, rotary vane pump with switch and internal bypass valve to ensure reliable operation every time.
  • Tips for oil tranfer pump: If you want to connect this pump to AC power, you will need a power converter. The pump can not only pump oil, but also pump hydraulic oil and other liquids. Electric oil change pump kit is not allowed to pump corrosive liquids, strong acids and strong alkaline liquids. Please use it when the engine is warm, or engine oil is warm and the viscosity is lower, it will be easier and faster to pump.
Check Stock

GROZ 115V AC Heavy Duty Electric Oil Drum Transfer Pump | Self Priming | 4 GPM Flow Rate | Built-in 2-inch Bung Adaptor (45550)

  • Heavy duty oil pumps designed specifically to transfer bulk oils, hydraulic oils, antifreeze.
  • Air cooled motor with Thermal Overload protection.
  • Non-corroding Aluminum die cast pump body.
  • A high horsepower to flow ratio assures adequate power to pump viscous fluids at low temperatures..
  • Self-priming, positive displacement design.
  • Pump has an internal bypass valve to bypass flow if the discharge pressure exceeds bypass valve setting.
  • Built-in 2” bung adaptor for mounting directly onto drums and tanks.
  • Can be used to transfer used oil also. Just fitting a screen onto the suction tube makes it effective for transferring used oil..
Check Stock

BESTOOL Air Hydraulic Pump - 10,000 PSI Hydraulic Foot Pump Pressure 1/2 Gal Reservoir Air Treadle Actuated Hydraulic Pump for Rams, Presses, Hydraulic Pullers(Single Acting) Orange - with Hose

  • BESTOOL Air actuated hydraulic treadle pump internal pressure relief valve for overload protection, prevent oil leakage.The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
  • Air powered hydraulic pumps maximum adjustable pressure: 10,000PSI, used for all 10-ton applications.Output oil 98 cubic inches/1.6 liters Fuel tank.Connector Type: 3/8" NPT quick hydraulic coupler with dust cap..
  • This hydraulic ram pump features a high-quality aviation aluminum pump core and with a more durable aluminum reservoir.Hydraulic air pump is equipped with a 6.5 ft / 2 m high-pressure oil pipe that features double protection of embedded steel wires and thickened outer layer..
  • The air over hydraulic pump adopts a humanized pedal motion design, which is easy to control and operate, save time and effort and has strong power, pressure adjustable.Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
  • This air hydraulic foot pump is designed to be used with single-acting cylinders only, efficiently operates many industrial and construction single acting ram applications..
Check Stock

BESTOOL Air Hydraulic Pump - 10,000 PSI Air Hydraulic Foot Pump 1/2 Gal Reservoir Air Treadle Foot Actuated Hydraulic Pump for Rams, Presses, Hydraulic Pullers (Single Acting) Yellow - with Hose

  • BESTOOL Air actuated hydraulic treadle pump internal pressure relief valve for overload protection, prevent oil leakage.The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
  • Air powered hydraulic pumps maximum adjustable pressure: 10,000PSI, used for all 10-ton applications.Output oil 98 cubic inches/1.6 liters Fuel tank.Connector Type: 3/8" NPT quick hydraulic coupler with dust cap..
  • This hydraulic ram pump features a high-quality aviation aluminum pump core and with a more durable aluminum reservoir.Hydraulic air pump is equipped with a 6.5 ft / 2 m high-pressure oil pipe that features double protection of embedded steel wires and thickened outer layer..
  • The air over hydraulic pump adopts a humanized pedal motion design, which is easy to control and operate, save time and effort and has strong power, pressure adjustable.Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
  • This air hydraulic foot pump is designed to be used with single-acting cylinders only, efficiently operates many industrial and construction single acting ram applications..
Check Stock

Injector Pressure Regulator Valve - IPR Valve - Compatible with Ford Trucks - Powerstroke 6.0L Diesel - E-350, Excursion, F-250, F-350 Super Duty - Replaces 5C3Z9C968CA, CM-5126, 5C3Z-9C968CA, AP63417

  • Replacement Injector Pressure Regulator Valve - regulates the oil bypass circuit of the high pressure oil pump. It is an electromagnetic valve that opens and closes to allow high pressure oil into the injectors. This enables the PCM to control fuel delivery by increasing the speed in which the IPR valve operates thus, being a critical component in your vehicle system..
  • Compatible Replacement for Ford 6.0L Vehicles - 2005 E350 Club Wagon | 2005 - 2010 E350 Super Duty | 2005 Excursion | 2005, 2006, 2007 F250 Super Duty | 2005, 2006, 2007 F350 Super Duty |. The injector pressure regulator valve can be located after removing the intake and the fuel filter housing above the engine which can be seen attached to the high pressure oil pump (HPOP)..
  • Replaces Part# 5C3Z9C968CA, 1846057C1, CM-5126, 5C3Z-9C968-CA, AP63417 - commonly found on popular F-250, F-350 Super Duty, E-350 and Excursion models with 6.0L V8 Diesel Powerstoke Engines including years 05, 06, 07, 08, 09, 10. If you are experiencing no or hard starting when the engine is hot or after stalling and usually starts when it is cold or your vehicle is idling erratically or jerking then you may have a problem with your IPR valve..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, this inj....
Check Stock

Three Bond High Viscosity Fast-Set Liquid Gasket Maker TB1217H

  • Sets to form an elastic body which is not affected by vibration or impact.
  • Maintains a stable rubber body over an operating temperature range of -76°F to 482°F.
  • Highly resistant to engine oil, various chemicals and coolant.
  • Use on the water pump, oil pan, valve cover, engine head, fuel pump, thermostat housing, oil pump and intake manifold.
Check Stock

stainless Steel Booster Pump Lawn Jet pumps Aluminum Alloy Shell Fuel Transfer Pump, 12v 24v Mini Car Electric Oil Pump For Pumping Diesel Oil Water Submersible for Home Garden Water Transport Irrigat

  • This high efficient fuel pump is an Perfect equipment for quick and clean oil-changes.It works great for pumping engine oil, crude oil and heating oil..
  • TSuitable for Oil crude oil Extractor used in motorcycles, caravans, cars, quads, industrial, water purification &treatmentequipmentvehiclecleaningagriculturalsprayingetc..
  • With handheld pump of Rotary Barrel Pump, more easily and safely to clean oil-changes. Built-in bypass valve and filter, easily accessible for cleaning oil pump..
  • Be widely used to draw water in yacht, fishing-boat, industry, etc.Fully automatic bilge pump, no separate float switch is needed..
  • Stainless Booster Water Pump/Electric Water Transfer Pump designed to transfer water from tanks, pools, rain barrels, and groundwater. Easy to set up and let it drain away from the accumulated water, ideal for both in-ground and above-ground pools..
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • ...i, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving.
  • Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount of liquid. Stable base avoids dumping.
  • The main hose is 80" long, with a quick plug on one side to connect the container, and a quick coupler on the other side to connect the dipstick tubes or ATF adapters. There is a ball valv....
Check Stock

SCITOO 6340GPH Submersible Sump Pump 1.5 HP Industrial Sewage Cutter Grinder Cast iron Pump Included Float Switch

  • 【MAIN PARAMETER】This 24 GPM Air-Operated Double Diaphragm Pump with 1 Inch Inlet And Outlet. This powerful air-operated double diaphragm pump operates from 29 to 115 PSI. Features a 1in. inlet and 1in. outlet..
  • 【EXCELLENTCONSTRUCTION】Rugged construction - resists corrosion for reliable performance and long life. Bolted construction is designed for leak-free fluid handling. Easy access to ball checks and fluid caps for maintenance and repairs..
  • 【VERSATILE USE】The diaphragm pump with convenient operating are widely used in various industries, such as petroleum, metallurgy, mining, coating material, printing, paper making, water treatment, automotive etc.Warning!Can not use for corrosive liquid..
  • 【UNIQUE CAPABILITIES】Features an externally serviceable air distribution system and all-bolted construction. Modular air valve is stall-free,this low pulsation air valve provides smooth and rapid changeover for increased efficiency and minimizes down time..
  • 【SAFETY & PROPER USE】The Diaphragm Transfer Pump is to be mounted upright during operation for user safety. This pump is designed specifically for Fuel Transfer of [ low viscosity petroleum fluids including diesel, kerosene, motor oil and some waste oil.].
Check Stock