ReviewsOil Sending Unit

Sealed Power 224-51198 Oil Pump Repair Kit

  • Adjustable Size: This oil pump cap cover has large adjustment range which is suitable for different oil pump caps.185mm maximum diameter, 135mm minimum diameter..
  • This tool is ideal for removing 5 & 7 hole fuel tank lids.Bending foot type with radian design, more suitable for the installation surface of oil pump cover, to ensure that the operation is not easy to slip..
  • A Must Have Tool: This fuel sender tank lock ring tool will help tackle the job of replacing the fuel sender fast and effective without damaging the oil pump rings..
  • Intended Use: This fuel pump removal tool can easily remove and install lock ring on the fuel tank when servicing the fuel pump or fuel sending unit. （use with a 1/2" drive ratchet or breaker bar）.
  • Applications: This fuel tank ring tool is suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on the gas tank.(Check the size before buy).
Check Stock

Engine Oil Pressure Sensor - Replaces 12673134 12585328 926-041 - Compatible with Chevy GMC Buick & Cadillac Vehicles - Silverado Trailblazer Yukon Sierra Savana Suburban Tahoe Impala

  • Replacement Engine Oil Pressure Sensor with Round Connector - Correct oil pressure and levels maintain proper operation of the engine. The oil....
  • Compatible Replacement for Chevrolet, GMC. Cadillac & Buick Vehicles with Round Sensor Connectors - 2009 Allure, LaCrosse | 2009 - 2014 Escalade |....
  • Replaces Part# Replaces# 12673134, 12585328, 926041, 1S10874, 2134411, 8125969510, 8126212340, 8126731340, PS690, PS711, PS508 - commonly found on....
  • OEM Fit, Quality, Finish - The engine oil pressure sensor may fail over time and cause a Check Engine Light (CEL) and throw out error codes. By....
  • Lifetime Warranty - This engine oil pressure sending unit comes complete with a lifetime warranty. If the part ever fails on your CTS, Avalanche, SS,....
Check Stock

SCITOO Compatible with E2000 Fuel Pump Electrical High Performance fit for Ford Aerostar Bronco E-150 E-250 E-350 F250 F350 for Lincoln Continental for Mercury Capri Cougar

  • Direct replacement - this fuel tank sending unit lock ring is made to match the fit and performance of the original ring on specific vehicle....
  • Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to....
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Engine Oil Pressure Sensor Switch - Replaces 12677836 D1846A 926040 12585328 - Compatible with Chevy GMC and Other GM Vehicles - Silverado Suburban Sierra Trailblazer Tahoe Grand Pri

  • Replacement Engine Oil Pressure Sensor - Correct oil pressure and levels maintain proper operation of the engine. The oil pressure sensor reads the....
  • Compatible Replacement for Chevrolet, GMC, Cadillac, Buick, Pontiac & Hummer Vehicles - 2002 - 2008 Escalade | 2003 - 2006 Avalanche 1500 | 1997 -....
  • Replaces Part# 12677836, D1846A, 926040, PS308, 12585328, 926-040, 12614969, 12616646, 1S6713 commonly found on popular select models including years....
  • OEM Fit, Quality, Finish - The engine oil pressure sensor may fail over time and cause a Check Engine Light (CEL) and throw out error codes. By....
  • Lifetime Warranty - This engine oil pressure sending unit manufactured by AA Ignition comes complete with a lifetime warranty. If the part ever fails....
Check Stock

ATP Automotive Oxygen Sensor Socket Set 7PC Socket Set

  • 21Pcs Sensor Oil Pressure Sending Unit Socket Set Oxygen Injection Tool Set Remove Oxygen.
  • Most comprehensive kit available. Features extended and reinforced socket body removes the most stubborn sensors without rounding them off.
  • Automotive 6pt and 12pt sensor sockets set for installing and removing oxygen sensors, injectors and thermal switches.
  • 7/8inches Short low Profile O2 Oxygen Sensor Socket, 7/8inches Universal Oxygen Sensor Socket.
  • Universal Vacuum Switch PVS, TVS Socket Tool.
Check Stock

GlowShift Replacement 0-100 PSI Fuel Pressure, Oil Pressure & Exhaust Pressure Gauge Sensor Sending Unit 1/8-27 NPT Thread

  • Replacement Electronic 0-100 PSI Fuel Pressure, Oil Pressure & Exhaust Pressure Sensor Sending Unit.
  • Compatible with GlowShift 7 Color Series Oil Pressure (GS-T704, GS-C704, GS-W704), 100 PSI Fuel Pressure (GS-T711, GS-C711, GS-W711) & 100 PSI Exhaust Pressure Gauges (GS-T723_100, GS-C723_100, GS-W723_100).
  • Compatible with GlowShift Elite 10 Color Series 100 PSI Fuel Pressure (GS-ET11, GS-EWT11) & Oil Pressure Gauges (GS-ET04, GS-EWT04).
  • Compatible with GlowShift 10 Color Digital Series 100 PSI Fuel Pressure (GS-TCD11) & Oil Pressure (GS-TCD04), Dual Pressure (GS-TCD-DP) & Dual Temp/Pressure Gauges (GS-TCD-TP).
  • Compatible with GlowShift 3in1 Combo Gauges w/ Pressure Reading (GS-3G-03, GS-3G-04, GS-3G-10, GS-3G-11, GS-3G-21, GS-3G-21-BAR, GS-3G-22).
Check Stock

Universal 175-185 Degree Radiator Cooling Fan Thermostat Temperature Switch 40A Relay Kit

  • Designed to turn on at 185 degrees and off at 175 degrees..
  • Sending Unit Thread Size: 3/8-18 NPT, Voltage: 12 V.
  • Includes a brass adapter to install the sending unit, wires, relay switch, circut breaker.Everything you need to install in your fan ..
  • Fitment: any size fan(7 inch ,10 inch ,12 inch,14 inch,16 inch).
Check Stock

Apeixoto 10pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Socket Set 1/2in and 3/8in Sq Drive AP1060K

  • Function: The Apeixoto oxygen sensor removers will help your in adjusting and removing oxygen sensors, oil pressure sending unit vacuum swithces and fuel injections. These tools can be used most vehicles..
  • Packages: There are 10 pieces removers and sockets in the red case. The whole tool set comes in a solid red case which will protect the tools well during shpping and let you keep the tools well after usage..
  • Specifications: The specification for these 10 oxygen sensor sockets are : 1/2 inch dr x 22mm x 6PT x 110mm, 1/2 inch dr x 29mm x 6PT x 90mm, 1/2 inch dr x 22mm x 12PT x 78mm, 1/2 inch dr x 27mm x 12PT x 78mm, 1/2 inch dr x 28mm x 12PT x 78mm, 1/2 inch dr x 7/8 inch x 50mm, 3/8 inch dr x 7/8 inch x 6PT x 80mm, 3/8 inch dr x 7/8 inch x 6PT x 90mm, 3/8 inch dr x 7/8 inch x 30mm, and 3/8 inch dr x 1 inch and 1-1/6 inch x 74mm.
  • Material: The Apeixoto oxygen sensor removers and oil Pressure Sending Units are constructed with heat-treated chrome vanadium steel. It is totally rust and corrostion resistant. The surface has a black powder and it looks much more shinny..
  • Warranty: 100% satisfaction. If you come across any issue or need any assists during usage, we are here to help..
Check Stock

A ABIGAIL GSS342 255 LPH High Flow Electric Intank Fuel Pump with Installation Kit

  • This fuel pump comes with 30 Days HASSLE-FREE RETURN & 1 Year / 12 months unlimited replacement promise..
  • The purpose of a fuel pump is to convey the required quantity of fuel from the tank to the engine at the necessary pressure..
  • While this is not a genuine OE part it is a direct replacement for the factory fuel pump sending unit & fuel pump assembly..
  • Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer, Wire harness and Tank Seal.
  • Please Check fitment for your vehicle Year/Make/Model on compatibility dropdown / chart. No modification necessary. Images depict actual item and....
Check Stock

240-33 ohms 4' (100mm) Fuel Tank Sending Unit for Marine Boat Truck Car Fuel Sending Unit Marine Fuel Gauge Sending Unit Truck Gas Tank Fuel Sender Fuel Water Level Sensor

  • Superior Performance: Our fuel tank sending unit fit 4.25-5" fuel tank has an advantage over thick film swim arm level sensors in the durability and reliability of a reed switch, no part damage, and no tank adjustments required.
  • Durable Material: The fuel sending unit is made of heavy duty 316 stainless steel, which is reliable and durable, anti-vibration, explosion-proof, can read data accurately, and can maintain excellent performance in various environments.
  • Wide Range of Application: The fuel gauge sending unit is widely used in boat, truck, bus and marine fields, and can support marine and automotive fuel level gauges and water level gauges.
  • Simple Installation: The package comes with mounting screws, washers, just remove the old gas tank fuel sender and install the new one, the water level sensor is a standard SAE 5 hole mounting pattern, and the installation takes about 15 minutes in total, you can let the fuel gauge work again, the red wire is positive and the blue wire is negative.
  • Please Note: In order to keep the fuel water level sensor from touching the bottom of the tank, if the tank is made of metal, the length of the sensor should be 0.5 inch less than the depth of the tank. If the tank is made of plastic, the length of the sensor should b....
Check Stock

12677836 Oil Pressure Sensor Switch D1846A for Chevrolet/GM Equipment 12616646,12573107, 12562230,12614969, 12569323, 12562230, 12556117, 12559780,8125622300, 8125731070, 8126166460, 1S6713, PS308

  • ...& MODEL】 Replaces# 12677836/12573107/12569323/12562230/12614969/12616646/12556117/12559798/8125731070/812622300/1S10786/D1846A/12559780/8126166460/1S6713/PS308- commonly found on popular Compatible with Chevy, Buick, and GMC models including years 03, 04, 05, 06, 07, 08, and more.The engine oil pressure sensor or sending unit can be located at the back of the intake manifold, see below for detailed models..
  • 【NOTE】★★If the Engine Oil Pressure Sensor Switch fails simply contact us for a replacement or refund. Please contact us first for any question, we will reply you within 12 working hours..
Check Stock