ReviewsOil Sensors

XTOOL D8BT Automotive Diagnostic Scan Tool with 3-Year Updates, 2023 Newest, CAN FD, ECU Coding, 38+ Services, Bi-Directional Control, All Systems Diagnostics, Key Programming, Crankshaft Relearn

  • ...ailable car modules remotely via BT to pull/clear codes, reset monitors, turn off warning lights in Engine/ABS/Airbag/Transmission/Suspension etc, retrieve freeze frame, ECU info, perform active tests and special functions, including check misfire data, cam retard, engine rpm, trans oil temp., mass air flow, clutch sensors, O2 sensors, ABS speed sensors, long/short term trims etc..
Check Stock

GlowShift Oil Filter Sandwich Plate Thread Adapter - 20mm x 1.5 Thread - Install up to (4) 1/8-27 NPT Oil Pressure & Temperature Sensors - Includes O-Ring & Port Plugs

  • GlowShift Oil Filter Sandwich Adapter Allows Users to Install (4) 1/8-27 NPT Oil Pressure and/or Oil Temperature Sensors to the Oil Filter of Your Vehicle - Installs Between the Engine Block & Oil Filter.
  • Features (1) Aluminum Sandwich Plate Adapter with (4) 1/8-27 NPT Female Thread Ports, (1) M20 x 1.5 Thread, (4) 1/8-27 NPT Flush Mount Port Plugs & (1) O-Ring for a Leak-Free Seal.
  • Note: This Oil Filter Adapter is Only Compatible if the Gasket Diameter of Your Oil Filter is 3" or Less.
  • Includes Step-By-Step Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

Permatex 59214 High Temperature Thread Sealant, 6 ml Tube, Pack of 1 , White

  • Resists leakage, vibration loosening, moisture, hydraulic fluids and diesel fuels.
  • Lubricates threads for easy assembly and disassembly.
  • Parts may be repositioned up to 4 hours after application.
  • Suggested Applications: head bolts into through holes, oil PSI sending units and sensors, oil and coolant lines, fuel fittings, rear axle fill plug, brake and power steering fittings.
Check Stock

GlowShift Gauge Package Compatible with Subaru Impreza WRX STI 2002-2007 - Tinted 7 Color 30 PSI Boost/Vacuum 100 PSI Oil Pressure & Oil Temperature Gauges - Black Triple Pillar Pod

  • GlowShift Gauge Package for 2002-2007 Subaru Impreza WRX STI with a Black Triple Pillar Gauge Pod, 3 Tinted 7 Color Series Gauges, Oil Filter Sandwich....
  • Includes 30 PSI Boost/Vacuum Gauge with 6’ Silicone Hose & T-Fitting - 100 PSI Oil Pressure Gauge with 1/8-27 NPT Sensor & 9' Sensor Harness - 300 F....
  • Black Triple Pillar Gauge Pod for 2002-2007 Subaru Impreza WRX STI Mounts 3 Gauges to the Vehicle's A-Pillar - Overlay Design Mounts Pod on Top of the....
  • Oil Filter Sandwich Adapter with 20mm 1.5 Thread Installs Both Oil Pressure & Oil Temperature Sensors to the Vehicle's Oil Filter - 3 Gauge....
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

GlowShift Gauge Package Compatible with Subaru Impreza WRX STI 2002-2007 - Tinted 7 Color 30 PSI Boost/Vacuum 100 PSI Oil Pressure & 300 F Oil Temp Gauges - Clock Replacement Triple Dashboard Pod

  • GlowShift Gauge Package for 2002-2007 Subaru Impreza WRX with a Black Triple Dashboard Pod, 3 Tinted 7 Color Series Gauges, Oil Filter Sandwich....
  • Includes 30 PSI Boost/Vacuum Gauge with 6’ Silicone Hose & T-Fitting - 100 PSI Oil Pressure Gauge with 1/8-27 NPT Sensor & 9' Sensor Harness - 300 F....
  • Black Dashboard Gauge Pod Replaces the Factory Clock & Mounts in its Position- Manufactured from ABS Plastic - Includes Mounting Hardware &....
  • Oil Filter Sandwich Adapter with 20mm 1.5 Thread Installs Both Oil Pressure & Oil Temperature Sensors to the Vehicle's Oil Filter - Add-On Clock Power....
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

Moen 7594EORB Arbor Motionsense Two-Sensor Touchless One-Handle Pulldown Kitchen Faucet Featuring Power Clean, Oil Rubbed Bronze

  • UNIQUE FINISH: Oil Rubbed Bronze finish delivers a rich, dark brown, Old World finish with striking light and dark accents.
  • TWO SENSORS: MotionSense delivers exceptional hands-free touchless convenience with double sensors, allowing a simple hand movement to trigger the flow of water.
  • POWER CLEAN: Power Clean spray technology provides 50 percent more spray power versus most of our pulldown and pull-out faucets without the Power Clean technology.
  • RETRACTABLE: Equipped with the Reflex system for smooth operation, easy movement and secure docking of the spray head.
  • FLEXIBLE DESIGN: Designed to be installed through 1 or 3 holes.
Check Stock

GlowShift Gauge Package Compatible with Subaru Impreza WRX STI 2002-2007 - Tinted 7 Color 30 PSI Boost/Vacuum 100 PSI Oil Pressure & Oil Temperature Gauges - Fiberglass Triple Dashboard Pod

  • GlowShift Gauge Package Compatible with the Subaru Impreza WRX 2002-2007 features a Fiberglass Triple Dashboard Pod, 3 Tinted 7 Color Series Gauges,....
  • Includes 30 PSI Boost/Vacuum Gauge with 6’ Silicone Hose & T-Fitting - 100 PSI Oil Pressure Gauge with 1/8-27 NPT Sensor & 9' Sensor Harness - 300 F....
  • High Quality Fiberglass Dashboard Gauge Pod Replaces the Factory Clock & Mounts in its Position - Stronger Design than ABS Plastic - Features a Dome....
  • Oil Filter Sandwich Adapter with 20mm 1.5 Thread Installs Both Oil Pressure & Oil Temperature Sensors to the Vehicle's Oil Filter - Add-On Clock Power....
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

5184294AE Engine Oil Cooler and Oil Filter Housing Adapter Assembly Compatible with 2011-2013 Chrysler 200 300 Town & Country, Wrangler, Dodge Charger, Ram 1500 V6 3.6L

  • [Fitment] 5184294AE engine oil cooler fit for2011-2013 Chrysler Town ＆ Country, 2011-2013 Chrysler 300, 2011-2013 Chrysler 200, 2011-2013 Dodge Journey, 2011-2013 Dodge Grand Caravan, 2011-2013 Dodge Durango, 2011-2013 Dodge Charger, 2011-2013 Dodge Challenger, 2011-2013 Dodge Avenger, 2012-2013 Jeep Wrangler , 2011-2013 Jeep Grand Cherokee, 2012 Ram C/V, 2013 Ram 1500.
  • Replace Part Number] 5184294AC, 5184294AD, 5184304AD, 5184304AE, 5184304AF, 5184294AE oil filter housing with Oil Filter Housing Adapter Assembly Sensor..
  • [Feature] Engine oil cooler made of 8-layer thick plates and 8-layer thin plates, cross double-layer design, which increases cooling efficiency. Helping to extend the life of the oil and engine. The engine oil cooler can keep the engine oil cool and clean..
  • [Perfect Replacement] Our oil cooler and filter housing kit with sensors and gaskets can perfect replacements for damaged ones and work flawlessly..
  • [ Warranty ] We provide a 6-month warranty,If you have any questions,please contact us via amazon, and we will reply you within 24 hours..
Check Stock

GlowShift Gauge Package Compatible with Subaru Impreza WRX STI 2008-2014 - Tinted 7 Color 30 PSI Boost/Vacuum 100 PSI Oil Pressure & Oil Temperature Gauges - Black Triple Pillar Pod

  • GlowShift Gauge Package Compatible with the Subaru Impreza WRX STI 2008-2014 features a Black Triple Pillar Gauge Pod, 3 Tinted 7 Color Series Gauges,....
  • Includes 30 PSI Boost/Vacuum Gauge with 6’ Silicone Hose & T-Fitting - 100 PSI Oil Pressure Gauge with 1/8-27 NPT Sensor & 9' Sensor Harness - 300 F....
  • Black Triple Pillar Gauge Pod Mounts 3 Gauges to the Vehicle's A-Pillar - Complete Factory A-Pillar Replacement - Manufactured from ABS Plastic -....
  • Oil Filter Sandwich Adapter with 20mm 1.5 Thread Installs Both Oil Pressure & Oil Temperature Sensors to the Vehicle's Oil Filter - 3 Gauge....
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

3/8-Inch Drive Oxygen Sensor Socket Offset Wrench Remover Tool fits All Vehicle O2 Removal and Installation Universal Puller and Removal Tool

  • REMOVE OXYGEN SENSORS FROM YOUR VEHICLE: This 10 Piece Specialty Sockets O2 Sensor Tool Set lets you quickly and easily remove oxygen sensors, oil pressure sending unit, fuel injectors, and vacuum switches.
  • Some O2 socket pieces feature cutout sides to prevent damage to wires and tubes.
  • Remove and install parts on most domestic and some international vehicles.
  • USE WITH YOUR TOOLS: Features 3/8-inch or 1/2-inch square drive to fit your O2 sensor wrench drives.
  • For use with ratchet, breaker bar, or hand wrench (driver tools not included).
  • Use this tool in conjunction with the O2 Sensor Thread Chasers to install new sensors easily (thread chaser and sensors not included).
  • BUILT TO LAST: Constructed of heat-treated chrome vanadium steel, this oxygen sensor remover set is built for strength, durability, and longevity.
  • Each 02 sensor socket is coated with a black oxide finish to provide resistance to rust and corrosion.
  • CONTENTS: This specialty tools set includes 10 pieces: 1/2 inch dr x 22mm x 6PT x 110mm, 1/2 inch dr x 29mm x 6PT x 90mm, 1/2 inch dr x 22mm x 12PT x 78mm, 1/2 inch dr x 27mm x 12PT x 78mm, 1/2 inch dr x 28mm x 12PT x 78mm, 1/2 inch dr x 7/8” x 50mm, 3/8 inch dr x 7/8” x 6PT x 80mm, 3/8 inch dr x 7/8” x ....
Check Stock

SCITOO 7pcs Sensor Socket Oil Pressure Sending Unit Master Sensor Socket Tool Kit Fit for Most Modern Vehicles

  • Designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches equipped with wires or vacuum tubes..
  • Oil rubbed Black oxide coating for corrosion resistance.
Check Stock