ReviewsOil Volume Resistivity

VLUOO Brake Bleed Kit Bicycle Hydraulic Disc Brake Oil Mineral for Shimano, TEKTRO, MAGURA, SRAM Series Bike Brake Repair Tools

  • All-round disc brake oil change tool kit. View the various brake oil video tutorials by scanning the QR code on the mobile phone..
  • The low resistance oiler is made of plastic steel and its chemical stability exceeds m-edical standards.All-round disc brake oil change tool kit..
  • A chemically stable low resistivity injector can provide an objective smoothness even when pushing a high consistency shock absorber without decay due to prolonged use..
  • 【Two Types Of Oil Storage】Filling Cylinder And Funnel, Which Can Deal With The Brake Handle Of Any Structure Flexibly. Can Be Used To Collect Waste Oil When The Bottle Is Linked To The Caliper..
  • 【Support three oil injection methods】syringe+funnel，syringe+funnel adapter，syringe+bottle..
Check Stock

Silver Epoxy, Electrically Conductive Adhesive, Highly Flexible Non-Bleeding AA-Duct 2919, 2.5gm kit

  • Spec. Gravity 2.32 g/cc Mixed Viscosity 995000 cP at temp 25.0 °C.
  • Mechanical Properties Hardness, Shore D 80 Adhesive Bond Strength 90 psi Lap shear 2 hrs At 65°C.
  • Electrical Properties Volume Resistivity 0.00011 ohm-cm,Dielectric Constant 4.8 At Frequency 1000 Hz.
  • Cure time 4 hrs At 65°C, 24.0 hour At 25°C.
Check Stock

Nickel Epoxy, Electrically Conductive Adhesive, Room Temp Cure, Air Dry, AA-DUCT 903, 50gm kit

  • Spec. Gravity 2.79 g/cc Cured Viscosity Paste, Solids contents % 100 Pot Life 30 minutes.
  • Mechanical Properties Hardness, Shore D 83, Shrinkage linear in/in 0.003.
  • Lap shear strength, psi 9400, Volume Resistivity ohm cm less than 0.038.
  • cure time 15 minutes At 100°C, 45 minutes At 50°C, 24 hours At 25°C.
  • Mix Ratio, parts by weight 100/5 Resin/Hardener, Operating Temperature -60 to 150 °C.
Check Stock

PZRT High Temperature K-Type Thermocouple Sensor Thermocouple Terminal Block Ceramics Terminal Block High Temp Porcelain Ceramic Connectors

  • Material: Made of high quality ceramic material, durable and long service life..
  • Accepts AWG 8 (3.3 mm) Type K thermocouples..
  • With high mechanical, high strength, high volume resistivity, good electrical insulation properties..
  • Unglazed ceramic thermocouple connector block for high temperature K-type thermocouples..
  • Package includes: 1 x Thermocouple Terminal Block..
Check Stock

Nickel Epoxy, Electrically Conductive Adhesive, Room Temp Cure, Air Dry, AA-DUCT 903, 2.5gm kit

  • Spec. Gravity 2.79 g/cc Cured Viscosity Paste, Solids contents % 100 Pot Life 30 minutes.
  • Mechanical Properties Hardness, Shore D 83, Shrinkage linear in/in 0.003.
  • Lap shear strength, psi 9400, Volume Resistivity ohm cm less than 0.038.
  • cure time 15 minutes At 100°C, 45 minutes At 50°C, 24 hours At 25°C.
  • Mix Ratio, parts by weight 100/5 Resin/Hardener, Operating Temperature -60 to 150 °C.
Check Stock

MG Chemicals 8463A-3ML Silver Conductive Grease, Maximum Thermal Conductivity, 5.5 g Dispenser, Greyish Yellow

  • Improves electrical connections between irregular surfaces..
Check Stock

3M Scotch-Weld Epoxy Adhesive Duo-Pak, Gray, 1.69-Ounce

  • Flexible, fast-setting, two-part epoxy adhesive that works well on a variety of substrates, including metals, ceramics, concrete, composites, wood and many plastics..
  • 7-13 minute work life(depending on workshop temperature). About 20 minutes to handling strength @ 72F. About 48 hours to full curement..
  • EPX system that is portable. Unused portion re-closable. Viscosity @ 72°F (23°C):40,000 to 90,000 cps..
  • Aluminum Overlap Shear @ 75F: 3500 PSI. . Aluminum T-Peel: 20 lb PIW. Overlap shear on abraded metals, plastics, and rubber: From 2300 to 2600 PSI.
  • Dielectric Strength (volts/mil):470. Volume Resistivity (ohms - cm):6.9 x 10. Shore D Hardness (approx.): 45..
Check Stock

USA Made - 25-Pack Waterproof Direct Bury Wire Cable Splice Kit 3M 18 to 10 AWG Low & High Voltage - 600V Max Landscape Lighting Irrigation & More 25 Pack

  • USA MADE - Filled with Water Proof Dow Corning SP4577 Dielectric Silicone.
  • Maximum Wire Gauge 10 AWG - Minimum Wire Gauge 18 AWG Features.
  • vIndustry Leading Volume Resistivity at 73°F (23°C): ohm­cm 2.17 x 1015.
  • Industry Leading Dielectric Strength, 50 mil gap volts/mil: >450.
Check Stock

AA-Bond FDA22 FDA Medical Grade Epoxy Adhesive Two Part Room Temp Cure 5gm kit

  • Spec. Gravity 1.44 g/cc Mixed Viscosity 27,000 cP After mixing Pot Life 3 hrs solids contents % 100.
  • Hardness Shore D 78 Adhesive Bond Strength 2100 psi At 25°C Elong at Yield 5 % Color Light Tan.
  • Volume Resistivity 1.50e+14 ohm-cmDielectric Constant 3.5 At 1000 Hz Thixotropic Index 1.4.
  • Maxi Service Temp Air 293 °F Min Service Temp Air -76.0 °F CTE linear 26.1 µin/in -°F At Temp 68 °F.
  • Thixotropic Index 1.2 Cure Time 1.00 - 4.00 hour At 65°C 24.0 hour At 25°C Pot Life 180 min.
Check Stock

VELLEDQ Field Assembly Sensor/Actuator Panel Mount Connector M12 5-Pin Male A-Coding Rear Flange Joint

  • Connector locking system: M12, Panel locking system: M16, Coding: A-coding interface, Contacts: 5 pins layout, Gender: Male, EMV compliance: Unshielding, Type: Rear flange panel mount..
  • Core material: Cu(Gold)+Zn, Core diameter: 26AWG / 0.25mm², Crimp range: 0.14-0.75mm², Termination: Welding, Tightening torque: 0.4Nm, Shell Meterial: Metal, Sealing: O-ring..
  • Rated voltage: 125V AC/DC, Current per contact ( 40 °C ): Max 4A, Volume resistivity: ≤3mΩ, Ambient temperature: -20℃~+80℃, Mehcanical operation: 003e100 mating cycles..
  • Standard: IEC 61076-2-101, Flame Retardant Rating: UL94-HB, IP Rating: IP67, Certification: CE / ISO 9001..
  • Perfect for the application on automated terminal connection, process control, and commercial electronic, can be easily connected to proximity switches, photoelectric barriers, flow monitoring devices, sensor devices and ctuator devices and field bus components..
Check Stock

High Volume Oil Pump Replacement - Compatible with 4.8L 5.3L 6.0L Silverado, Suburban, Tahoe, Trailblazer, GMC Sierra, Yukon, Cadillac Escalade - Replace M295HV

  • REPLACEMENT HIGH VOLUME OIL PUMP - If you have an engine that can rev beyond 6,000 RPM or higher, a high performance or high volume oil pump would probably be a good upgrade and provide added lubrication insurance..
  • FIT THE FOLLOWING VEHICLES - High volume & high pressure oil pump compatible with 4.8L 5.3L 5.7L 6.0L GM Vortec V8 engine oil pump, induding Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier, model year 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020..
  • REPLACE PART NUMBER - Replace GM 12696357 12586665 oil pump, replace Melling M295HV oil pump. Commonly found on Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier with 4.8 5.3 5.7 6.0 V8 Vortec Engine..
  • OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine GM or Melling high volume oil pump, but it works even better and lasts longer. Save yourself times and money by replacing high volume oil pump yourself..
Check Stock