ReviewsOlympic Weightlifting Equipment

Cast Iron Olympic Weight Plates – Free Weights with 2-inch Hole & Anti-Rust Hammertone Finish - Ideal for Strength Training, Crossfit Equipment & Home Gym Set – Sold in Pairs - 2.5LB–45LB

HEAVY DUTY OLYMPIC WEIGHTS - Our cast iron weight set is made with the superior hammertone finish and solid cast iron for durability. They're smooth, don't corrode, and can endure the most intense workouts..
UNLOCK YOUR FITNESS GOALS - Whether it’s bulking up, building strength or toning, these Olympic weight plates can help you achieve your goals. Stock up your garage gym and get in the zone anytime with your own set of weights..
WIDE RANGE OF WEIGHTS - Our Olympic weight sets are available in 6 different weights: 2.5lbs, 5lbs, 10lbs, 25lbs, 35lbs, and 45lbs. Our 45lb plate follows Olympic standards with 450mm size and a 2" hole..
EASY GRIP – This weights set for home gym has deep edges that allow you to have a good grip on it so you can safely lift and load the weight onto bars and other weightlifting equipment, thus minimizing accidents..
VISIBLE WEIGHT MARKING - For convenience, each cast iron plate has large, raised weight markings in both the metric and imperial system so you can quickly choose the right one while working out..

Check Stock

STOTT PILATES Intense Body Blast - Pilates Interval Training, Level 3

...Our Olympic weight sets are easy to dismantle and pack. Simply remove the locking clips for the straight bar to come apart. The wheels also slide off smoothly. Now you can work out anytime, anywhere..
Suitable for your Gym and Fitness Equipment For Home Use - AXLE’s weightlifting bar wheels have air-filled rubber tires that won’t cause damage to your flooring. This set also saves space in your home. Its anodized aluminum and ACS plastic build are entirely collapsible, providing you with easy storage..

Check Stock

Doeplex Olympic Weight Plate Holder Power Rack Attachment for 2x2 inch Power Rack - Fit 2\ Olympic Weight Plates

【Save Space】When your room space is limited, it may be difficult to organize the weight plate. The olympic weight plate holder will help you keep your home gym clean and save space while protecting your weights and equipment..
【Easy to use】This weightlifting board bracket is easy to insert and lock. Just slide the pin into the hole in the barbell frame and swing it down to lock it in place. Pretty sturdy on your power cage. Strong bearing capacity, very suitable for home / gym squat racks..
【High Duty】This olympic weight plate holder power rack is made of sturdy steel, the rigid steel ensures that your weight plates are stored safely.Please note that this product can not be touched with water for a long time. Always wipe it with dry towel to keep it dry to prevent rust and affect its use..
【Extra Long】 Dimension：13.3” * 5.1” * 2”. This olympic weight plate holder power rack attachment fits most power cages with 2” x 2” tube (with 1" holes). The length of 13 inches can hold multiple barbell weight plates..
【Warm Notice】Please confirm your size before buy！！ Designed to fit 2" x 2” square tube power racks with 1” hole & 2 “diameter. The welding part of the side will be slightly uneven, but it will not affect the use....

Check Stock

BodyReapers Weight Lifting Belt for Men & Women Heavy Duty Lever Belt Weightlifting Belt Made of Calfskin Leather 10mm Thick 4 Inch Wide - Powerlifting Belt for Back Support Gym & Fitness Training

STRONG STEEL BELT BUCKLE SECURITY: Body Reapers presents a strong security solution with steel adjustable lever buckle weightlifting belt.
non-slip steel buckle is built to protect all from Olympic lifting to new workout lovers.
great for heavy weightlifting like squats and deadlift.
QUALITY THAT STAYS AT THE TOP: Body Reapers is dedicated to providing high quality workout equipment like lever belt made up of heavy duty dual inner calfskin leather secured by suede lining, with 4 inches width,10mm thickness and triple stitched weightlifting belt solution.
FITNESS ORIENTED FUNCTIONALITY: Body Reapers seriously provide back support for gym, stabilizes the spine, increases intra-abdominal pressure thus preventing spine flexion, lifting belt increases velocity of the squat, lowers the rate of injury.
LIFTING WAS NEVER EASIER & SIMPLER: Your happiness is our business and our weight lifting belt is the highly easy and simple to use and provides maximum strength to carry heaviest weights with ultra-back support.
MUST READ SIZE CHART: Don’t forget to check size chart for Body Reapers lever belt weightlifting solution.
Please do not order by your pants size and take size of your waist by using a flexible measuring tape.
drop your message to our highly cooper....

Check Stock

Body Reapers Weight Lifting Belt for Men & Women Heavy Duty Lever Belt Weightlifting Belt Made of Calfskin Leather 10mm Thick 4 Inch Wide - Powerlifting Belt for Back Support Gym & Fitness Training

STRONG STEEL BELT BUCKLE SECURITY: Body Reapers presents a strong security solution with steel adjustable lever buckle weightlifting belt.
non-slip steel buckle is built to protect all from Olympic lifting to new workout lovers.
great for heavy weightlifting like squats and deadlift.
QUALITY THAT STAYS AT THE TOP: Body Reapers is dedicated to providing high quality workout equipment like lever belt made up of heavy duty dual inner calfskin leather secured by suede lining, with 4 inches width,10mm thickness and triple stitched weightlifting belt solution.
FITNESS ORIENTED FUNCTIONALITY: Body Reapers seriously provide back support for gym, stabilizes the spine, increases intra-abdominal pressure thus preventing spine flexion, lifting belt increases velocity of the squat, lowers the rate of injury.
LIFTING WAS NEVER EASIER & SIMPLER: Your happiness is our business and our weight lifting belt is the highly easy and simple to use and provides maximum strength to carry heaviest weights with ultra-back support.
MUST READ SIZE CHART: Don’t forget to check size chart for Body Reapers lever belt weightlifting solution.
Please do not order by your pants size and take size of your waist by using a flexible measuring tape.
drop your message to our highly cooper....

Check Stock

Body Reapers Weight Lifting Belt for Men & Women, Heavy Duty Lever Belt Weightlifting Belt Made of Calfskin Leather 10mm Thick, 4 Inch Wide - Powerlifting Belt for Back Support, Gym & Fitness Training

STRONG STEEL BELT BUCKLE SECURITY: Body Reapers presents a strong security solution with steel adjustable lever buckle weightlifting belt.
non-slip steel buckle is built to protect all from Olympic lifting to new workout lovers.
great for heavy weightlifting like squats and deadlift.
QUALITY THAT STAYS AT THE TOP: Body Reapers is dedicated to providing high quality workout equipment like lever belt made up of heavy duty dual inner calfskin leather secured by suede lining, with 4 inches width,10mm thickness and triple stitched weightlifting belt solution.
FITNESS ORIENTED FUNCTIONALITY: Body Reapers seriously provide back support for gym, stabilizes the spine, increases intra-abdominal pressure thus preventing spine flexion, lifting belt increases velocity of the squat, lowers the rate of injury.
LIFTING WAS NEVER EASIER & SIMPLER: Your happiness is our business and our weight lifting belt is the highly easy and simple to use and provides maximum strength to carry heaviest weights with ultra-back support.
MUST READ SIZE CHART: Don’t forget to check size chart for Body Reapers ....

Check Stock

ZOVOTA Olympic Weight Plate Holder Attachment Fits 2\ x 2\ Weight Strength Training Plates Tube Power Cage Set of 2 Storage Rack

...ith dry towel to keep it dry to prevent rust and affect its use..
【Save Space】When your room space is limited, it may be difficult to organize the weight plate. The olympic weight plate holder will help you keep your home gym clean and save space while protecting your weights and equipment..
【Easy to use】This weightlifting board bracket is easy to insert and lock. Just slide the pin into the hole in the barbell frame and swing it down to lock it in place. Pretty sturdy on your power cage. Strong bearing capacity, very suitable for home / gym squat racks..
【Extra Long】 Dimension：13.3” * 5.1“ * 2 “.This olympic weight plate holder power rack attachment fits most power cages with 2" x 2" tube (with 1" holes). The length of 13 inches can hold multiple barbell weight plates..
【Warm Notice】Please confirm your size before buy！！ Designed to fit 2" x 2” square tube power racks with 1” hole & 2 “diameter. The welding part of the side will be slightly uneven, but it will not affect the use. Please refer to the product details before placing your order..

Check Stock

CAP Barbell 2-Inch Olympic Grip Plate (10-Pound (Set of 4))

SET OF 4 (each 10 lbs., TOTAL of 40 lbs.).
Made from solid cast iron to withstand regular use.
Fits on all 2" Olympic-style weightlifting bars, as well as a wide variety of machines.
Plates feature oversized holes that allow the user to safely lift and load it onto bars and other equipment.
Coated in a semi-gloss finish for a stylish look and corrosion protection.
Poundage is clearly marked in contrasting silver paint.
2" grip plates are available in 2.5, 5, 10, 25, 35 and 45 lb weights.
Increase muscle strength with regular use.
Useful addition to home or professional gyms..

Check Stock

CAP Barbell 2-Inch Olympic Grip Plate (5-Pound (Set of 2))

SET OF 2 (each 5 lbs., TOTAL of 10 lbs.).
Made from solid cast iron to withstand regular use.
Fits on all 2" Olympic-style weightlifting bars, as well as a wide variety of machines.
Plates feature oversized holes that allow the user to safely lift and load it onto bars and other equipment.
Coated in a semi-gloss finish for a stylish look and corrosion protection.
Poundage is clearly marked in contrasting silver paint.
2" grip plates are available in 2.5, 5, 10, 25, 35 and 45 lb weights.
Increase muscle strength with regular use.
Useful addition to home or professional gyms..

Check Stock

100pcs Adhesive Semicircle Feet Bumper Door Furniture

150 lb Set bumper plate include: 2X15lb, 2X25lb and 2X35lb. Fit all Olympic barbells with 2-inch sleeves. (2 packages).
Made of proprietary pure rubber formula that combines the ideal mix to create low bounce, Odourless, and high durability bumper plate. Durometer Rating: 90..
Perfect for Olympic weightlifting where you’re often dropping the bar from shoulder height and above, Expertly designed stainless steel "hooked" insert that remains firmly seated. Extremely durable virgin rubber will last for years..
The considerably reduced noise of rubber bumpers can be a blessing especially if they’re the home variety and you have kids, neighbors close by..
Olympic-Sized Plates : 17.5 inches / 45cm in diameter and thickness varies by weight fits any Olympic bar with diameter 2 inch. Great for your garage gym, CrossFit gym , or Olympic training center..

Check Stock

CAP Barbell 2-Inch Olympic Grip Plate (10-Pound (Set of 2)), Black

SET OF 2 (each 10 lbs., TOTAL of 20 lbs.).
Made from solid cast iron to withstand regular use.
Fits on all 2" Olympic-style weightlifting bars, as well as a wide variety of machines.
Plates feature oversized holes that allow the user to safely lift and load it onto bars and other equipment.
Coated in a semi-gloss finish for a stylish look and corrosion protection.
Poundage is clearly marked in contrasting silver paint.
2" grip plates are available in 2.5, 5, 10, 25, 35 and 45 lb weights.
Increase muscle strength with regular use.
Useful addition to home or professional gyms..

Check Stock