ReviewsOn Car Brake Lathe

Dr.Acces Golf Cart Brake Shoes Spring Kit for Club Car Brake Parts for Club Car DS (1981Up) and Precedent Gas/Electric. Replace# 1018163-01, 1011466

Golf Cart Brake shoes Spring kit including:Brake Shoe Clamp Spring x2,Club Car DS / Precedent Brake Shoe Hold-Down Pin x 2,bottom brake shoe spring x 1, top brake shoe spring x 1..
Fits the Following Gas & Electric Models:Club Car DS 1981-Up,Club Car Precedent 2004-Up,E-Z-GO 1982-Up,Yamaha G1/G2 and G9 Models Up to 1992.
Replaces Club Car OEM Number(s): 1018163-01,1011466-1/2.
If you need to install 2 brakes, please purchase 2 sets..
These springs wears over time and needs replacing to improve your stopping power..

Check Stock

Partsam High Mount Stop Light 3rd Third Brake Light for 1999-2006 Silverado Sierra 1500 2500 HD 3500 Chrome Housing Smoke Lens Center Mount Rear Top Cab Roof Cargo Lights Lamps (1 Plug)

High mount brake light fits for 1999 2000 2001 2002 2003 2004 2005 2006 Silverado/ Sierra 1500/ 2500 HD/ 3500, 2007 only Compatible with CLASSIC Model & 1999 only Compatible with New Body Style Model.
Bright Sparking LEDs - Full LED light source. Provide both a dazzling look and outstanding illumination to the back of your car.
This bake light case is padded with foam back and is perfectly sealed around. The foam gasket is designed for water-proof. As long as there is no gap between the car and the foam, water will not leak into your car..
The rear tail brake light cargo lamp is no more drilling needed. Hand screw tool is better for the installation. The factory screws could be used on this brake lamp..
Before placing the order this brake light, please check your car model in the Amazon Fitment Filter System in the top left corner. Compatibility information provided is for reference only..

Check Stock

WANLIAN Car Code Lock,Car Anti-Theft Device,Brake Pedal/Steering Wheel Lock,Locking Bar,Anti Theft Protection,Steering Wheel Clutch Lock

✔LOCK APPLICATION: Brake pedal lock/Anti-theft bar is designed to lock the steering wheel to the brake pedal..
✔DURABLE DESIGN: Car anti-theft device is made from hardened steel for maximum resistance to cutting and hammering..
✔MAXIMUM SECURITY: Wheel lock has an adjustable length to fit brake pedals/steering wheels on most vehicles..
✔SPECIFICATIONS: 78cm steering wheel lock is designed to lock the steering wheel to the brake pedal..
✔Trust in the high-quality car accessories from properly care for and protect your car. This way you will be able to enjoy it with great driving pleasure for a long time to come..

Check Stock

Start-X Remote Start Starter for Ford F-150 2015-2020, Edge 16-19, Expedition 18-19, || Plugs in to OBD2 Port || No Installation Required || Will Not Work with Any Non Listed Vehicles

...ngine Start/ Pre-warm or Pre-cool your car】Keep the air conditioner on after getting out of the car, use App or remote key to start engine outside the car, the air conditionerthe will turn on automatically. Remote Key start engine sensing distance is 50-150 meters..
【One Key Start / Build-in Lock】 Step on foot brake and press button for 1S to start up the car directly. When start the car and step on the foot brake, the central locking system will be locked, don't worry the kids will open the door when driving..
【Keyless Entry Especially For Upgrading Old Models】Phone sensing distance is 2-5m, door will unlock when the phone approch the car 2-5m. Fits for 95% DC12V compact, sedan, coupes, SUVs, pick-ups on the market. For Honda /Nissan /Chevy/Mercedes Benz/Jeep Cherokee more..
【Important】One of the following steps is necessary to active remote start function. 【1.】 When the car in start-up state, put the car gear in”P” or “N” position and pull up hand-brake on, press the start button for 2 , the led inside transmitter will flash slowlyWhen you get off the car, to shut down the engine and lock the car, then remote start function is actived.【2】Step on footbrake, long press the third and the fourth button at the same time on ....

Check Stock

New Replacement Belt for Asian Mini Lathe w/Model # Grizzly 33685 G8688

for use with 7x10 Harbor Freight Mini Lathe, 03911 Homier 7x12 Mini Lathe, 33684 Harbor Freight 7x10 Mini Lathe, 5278 Cummins 7x12 Mini Lathe, 82500 Micro-Mark 7x12 Mini Lathe, 82710 Micro-Mark 7x14 Mini Lathe, G8688 Grizzly 7x12 Mini Lathe.

Check Stock

Goodyear Brakes GYD1084 Premium Carbon Ceramic Automotive Front Disc Brake Pads Set Vehicle Replacement Part for Chrysler Aspen, Dodge Dakota & More

COMPATIBLE WITH Front Brake Pads - Chrysler Aspen 09-07.
Dodge Dakota 12-05, Durango 09-07, Ram 1500 10-06.
Ram 1500 19-11, 1500 Classic 2019, Dakota 2011.
HARDWARE KIT INCLUDED: Each set of front brake pads come with premium hardware kits for easy installation. In case of any difficulties, you may reach out to us, and we will be happy to assist you. Warranty of 3 years or 36,000 miles of use, whichever comes first..
EXTRA COATING FOR LONGER LIFE: Slots and chamfers on the brake pads assist in vibration reduction and provide better resistance from brake fade and the usual wear and tear. The front brake pads are also treated with a powder-coated finish for increased weather and corrosion protection..
BEST OF SAFETY AND DURABILITY: Goodyear Brakes is committed to passenger’s safety. These ceramic brake pads will provide your car with maximum stopping power and give you better control. Enjoy consistently even braking, ride after ride..
DESIGNED FOR HILLY TERRAIN: These carbon-ceramic brake pads will provide your vehicle with maximum stopping power and give you better control of your car on steep, demanding roads. Enjoy consistently even braking, ride after ride..

Check Stock

Woodturning

Sturdy & Durable Construction: The mini lathe is made of high-quality HT200 cast iron, which stands up to tear and wear. It is equipped with an 850W motor that delivers a great deal of energy. If you are into making models, it would be your punctilious assistant..
Infinitely Variable Speeds: Revolving Speed Range: 50-2500. The mini lathe machine comes with variable speeds that give you the convenience to achieve the best work. This lathe allows you to work on both forward or reverse of any possible speed. The feeding rate can be adjusted manually or automatically. And an emergency button is accessible just in case..
Works with Precision: Spindle Bore: 1.5"/38 mm. The metal working lathe is pre-installed with a 3-jaw chuck, 4.9"/125 mm in diameter, that can clamp raw materials tight, and a backsplash guard that prevents metal filings..
Stable & Reliable Operation: Swing Over Bed: 8"/210 mm.
Swing Over Cross Slide: 32"/800 mm. The small metal lathe features a turret post for quick tool change and a center rest for tight pieces holding, making internal cutting, face cutting, and bevel cutting possible..
Wide Application: The lathe produces precision work without taking up a lot of room in your shop or garage, making bushings, spindles, prototypes, models, a....

Check Stock

1797 Spoiler for Cars Third Brake Light Turn Signal Red LED Strip Universal Exterior Accessories for Rear Spoiler Lip Trunk Roof Wing Trucks Carbon Fiber 51 Inch

5 LIGHTING MODES - when you turn on the daytime running lights, the spoiler light strip remains lit at all times. The brake light strip becomes brighter when the brakes are activated to alert the rear to safe driving. The light comes on from the center and moves quickly outward when you press the hazard warning button. The streamer of the universal spoiler light will turn left or right when you turn on the turn signal light..
WATERPROOF IP67 - The led brake light strip is made of high-density waterproof material and works well even when driving in fog, rain or snow..
HIGH BRIGHTNESS - Built-in 171 LED beads, this red LED strip is really cool as an extra brake light and turn signal light. Great for night driving, the spoilers for car spoiler is easily noticeable at night..
EASY TO INSTALL - It only takes 5 minutes to set up the rear window spoiler light and wire your car.This LED brake light strip is suitable for trucks, pickups, SUVs, vans, trailers, cargo and other cars. (Note: The spoiler light with 2 lighting modes is cuttable, but the spoiler light with 5 lighting modes cannot be trimmed. Please measure the length of your car spoiler or roof wing before purchasing.).
CUSTOMER SERVICE - 12-Month Warranty.30-Day Money-Back Guarantee. Do not tear off th....

Check Stock

IRONWALLS Carbide Wood Lathe Turning Tools Set, Carbide Tipped Turning Chisels for Lathe Include Finisher, Rougher, Detailer, Carbide Lathe Tools Woodworking with Interchangeable Handle & 8PCS Inserts

【Complete Wood Turning Chisels Carbide】IRONWALLS carbide tipped wood lathe turning tools set for woodworking includes 1 x 11.2” Interchangeable grip handle, 1 x 10.6” Extension Rod, 4 x 9.6” stainless steel arbor shafts, 2 x round inserts, 2 x square inserts, 2 x diamond inserts, 2 x square circle inserts, 1 x T15 wrench, 1 x L-shape wrench and beautifully packaged in an easy-to-store & carry aluminum box..
【Adjusted Freely for Different Applications】Designed with a small lock on the lathe tool handle and coming with a removable extension rod, you can adjust the length of the shafts and the overall length of the carbide lathe tools woodworking freely. Furthermore, this wood turning lathe kit includes 4pcs shafts with 8pcs carbide inserts, which does not need to frequently change inserts in complex turning tool projects so that improving the working efficiency..
【Rotatable Blade Insert Design】Per piece of carbide insert tip is designed with four indexable tungsten carbide edges, which are sharp, solid and wear-resistant. When one edge of the cutter head is blunt, you can turn it to a new edge, which makes the blade can be used for a longer time, money saving. Furthermore, there are 8pcs carbide wood lathe tools blade inserts replacemen....

Check Stock

Hurricane Turning Tools, HSS, 3 Piece Bowl Gouge Set (1/4\

【PRODUCTS INCLUDE】 - Lathe tools including(1)10.7"handle (2) 7.9"wood turning tools including square,round,diamond,square arcs(3)easy to replace the head of the T15 wrench,all parts are made of special hard sponge full fitted wrap,in the box..
【5 SECONDS QUICK DISASSEMBLY】 - No tools required,simply loosen the knurled chuck and insert the wood lathe tools,then screw on the collet and you can immediately go to work,the whole process takes five seconds.The wood turning tools for lathe screw self-locking collet fits snugly into the top thread,so you can experience visible robustness..
【HIGH CUTTING EFFICIENCY】 - Sharp high-density tungsten wood lathe cutting edge allows you to handle any wood lightly,and is more durable than other typical carbon and high-speed steel material wood turning tools.It is less likely to deform and stick during cutting,and if the cutting edge becomes dull,simply change the direction of the cutting edge with the included T15 wrench and you will have a fresh,clean cutting edge again..
【EASY TO CONTROL】 - Whether pure aluminum solid handle,or the tool bar of high-speed steel material,mirror polishing treatment to ensure that you can move on the frame without obstacles,square axis wood lathe tools and the tool frame c....

Check Stock

Benchtop 14" Variable Speed Wood Lathe w/induction motor

Wahuda Tools has listened to many people’s suggestions and integrated the most desirable features into our 14” Midi Lathe. Our lathe is 830 mm long x 330 mm wide x 430 mm high and is portable, but big enough, to satisfy the needs of beginners to advanced users..
The exceptional 1HP AC motor that is perfectly paired with an inverter that maintains a higher and more consistent output torque which is not found on most of the competitive models in today’s market This is especially effective when running at speeds as low as 30RPM and maintaining the output torque of the spindle at or near 100% which is beneficial for users who need to work at low speeds to make certain projects..
The Midi Lathe has three speed ranges (30-800, 150-1,700, and 350-3,700 RPM) which can be easily changed with a quick release lever on the motor to release belt tension. The spindle speed can conveniently be viewed on the front window of the lathe’s digital display..
Even though this is a bench top lathe, Wahuda uses a 1’’ diameter toolrest which is a common size used on medium and large lathes which allows it to be able to use many of the different toolrests on the market..

Check Stock