ReviewsOne Ear Clamps

Single Ear Hose Clamps, VIGRUE 100Pcs 6-28.6mm Hose Clamps 10 Sizes with Ear Clamp Pincer 304 Stainless Steel Stepless Hose Clamps for Securing Pipe Hoses and Automotive Use

100% 304 Stainless Steel:All the VIGRUE TUV approved High precision single ear stepless hose clamps including the band, housing and screw are made of 100% high quality and premium heavy duty 304 stainless steel material that are more salt resistant, anti-rust, anti-corrosion, water proof, oil proof than other 201 stainless steel. Solid and sturdy material ensure the adjustable hose clamps last a long time for use. You will no longer worry about them rusting and breaking..
360° Stepless Sealing: Special cochlear design provides a strong thermal expansion compensation function, which compensates for the dimensional change caused by the change of the hose, so that the pipe is always in a good sealing and fastening state. Without any steps or gaps in the crimp clamp, inner circumference assurance the hose uniform surface compression,the clamping effect is obvious and stronger than that of the traditional screw type clamp..
Practical and Easy to Use:These clamps are locking secure and tight.Used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, household etc. both indoor or outdoor..
Convenient Plier Tool: An useful Ear Clamp Pincer are included in this kit, with plastic coated handle, whi....

Check Stock

Swpeet 10Pcs Ear Clamp Pliers with CV Boot Clamps Kit, Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier CV Clamp Tool CV Joint Banding Tools for Most Cars

☛ 1, 【Brand Advantage 】—– Join the 5 million Customers powered by our leading Product and Service. CV Boot Clamps are High-quality non-magnetic Stainless Steel material , Solid and Durable. Pliers constructed from pressed steel with the black-coated finish. Safe and durable. This tool is essential for fixing CV boots..
☛ 2, 【With 8Pcs CV Boot Clamp】 —– Stable characteristics, high reliability. Loose or damaged parts can be harmful to your automobile and create grease spills, so a new one helps to correct any issues, Use safe material and will not do harm to your vehicle..
☛ 3, 【With Ear Clamp Pliers and CV Joint Boot Clamp Pliers 】 —– The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
☛ 4, 【Easy To Use】 —– Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratche....

Check Stock

Apollo Stainless Steel Crimp Clamp Tool - 1 Each

ICP-PC01 Pinch Clamp Removal Tool is specifically designed to remove Stainless Steel Pinch Clamps (not included) in the event of a mistake or need for a modification..
Compatible with any brand of stainless steel pinch clamps designed for use with PEX. Also ideal for removal ear clamps with Max. ear width 13mm..
Compound action cutting tool: maximum mechanical advantage for easier and safer use. High mechanical advantage makes clamp removal easier and reduces the risk of strain injury..
Designed to deliver many cutting cycles without loss of performance, using the lowest practical cutting force. Constructed of solid metal for long tool life, with textured grips for a more secure hold. Cinch clamp removal tool to be used in conjunction with the cinch rings to remove PEX cinch clamp rings. The tool provides a fast and quiet solution to removing PEX fittings and can be used in both home and commercial settings. Safely cuts PEX stainless steel clamps for quick fitting salvage..
A fitting that has been removed and is in good shape can be used in another system saving money. Avoid clamping on the insert ribs or barbed area, which will damage the fitting making it unusable. Ideal for stainless steel and steel clamps from Apollo, Oetiker, Watts, etc..

Check Stock

Ear Type CV Joint Boot Clamp Plier

Performance Tool Ear Type CV Joint Boot Clamp Pliers (W83013).
For all ear-type clamps including GM FWD outboard CV joints..
Ideal for installing clamps fuel filters.
Great for CV joint boots and other cooling system hoses.
Heavy duty steel and no-slip grip construction.

Check Stock

ANEX Stainless Steel Rubber Grip Pincers Pliers Pin Bending Type No.256

【Widely Application】 Perfect for installing and removing single ear hose clamps, double ear clamps, stepless clamps, which widely used on CV boots, coolant and fuel lines, air pressure systems, compressors..
【HIGH QUALITY】 Made of high quality carbon steel for durability and long-lasting..
【Comfort Grip】 PVC handles for anti-slip and comfort grip..
【Dimension】 220 x 48 x 16mm/8.7 x 1.9 x 0.6"..
【ANTI-RUST OIL】 The antirust oil may be appeared on the pliers, it can protect the pliers from rusting. It's not dirty or used products, you can clean it with a towel and it will not effect the function..

Check Stock

VIGRUE 100Pcs 6-28.6mm Single Ear Hose Clamps 10 Sizes with Ear Clamp Pincer 304 Stainless Steel Stepless Hose Clamps for Securing Pipe Hoses and Automotive Use

... can be equipped fast and will hold very well, which saves your time efficiently.
Multi size pack is handy to have for your projects & repairs..
【Heavy Duty Plier】Come with a useful ear clamp pincer in the handy box, with plastic coated handle, comfortable to grasp, which is widely applied to single ear hose clamps, double ear clamps, stepless clamps and so on, convenient for your installation.
【Reliable SS Material】Made of 304 stainless steel, these clamps are corrosion resistant and anti-rust, can be applied to complex environment.
The bigger cold-working deformation 304 stainless steel material get, the greater magnetic properties it will possess, which is normal..

Check Stock

CV Joint Boot Clamp Pliers , Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier CV Clamp Tool CV Joint Banding Tools for Most Cars with 3 Pair Clamps

...p Pliers : Use with any banding up to 2/5-inch (10mm) in width.
Suitable for ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses.
Plier works on steering gear gaiters and fuel hoses on various brands of cars.
Can be used for working on Oetiker System hose clamps.
◇ High-quality : The CV Joint Banding Tool is made of quality stainless steel throughout, which is durable, corrosion resistant, oil resistant, high temperature resistant, and long lasting. The plier head is hardened and treated for higher hardness.
◇ How to Use : Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and cut.
To complete clamping, fold down remaining band tail band into clip and secure by tapping down clip ears clip.
We recommend double-wrapped band for added strength.
◇ CV Joint Boot Clamp Plier : Includes 3 X small clamps and 3 X large clamps. Made of stainless steel, they are very tough and can lock items very firmly. The locking teeth stop the tie at the desired length ....

Check Stock

Jucoan 80 PCS Stainless Steel Single Ear Hose Clamps 8 Sizes 1/4\ - 15/16\ Cinch Clamp Rings with Ear Clamp Pincer, Pex Pinch Clamp Assortment Kit for Securing Pipe Hoses and Automotive Use

Package includes 80 pcs assorted sizes single ear pinch hose clamps and 1 ear clamp pincer to help increase clamping force..
High precision single ear hose clamps are made of heavy duty 304 stainless steel that are sturdy, salt resistant, anti-rust, waterproof and can be used for long time..
This single ear hose clamp set covers inner diameter range from 1/4" - 15/16.

Check Stock

Heavy Duty CV Boot Clamp Pliers Joint Tool Ear-Type Clamp Crimping Removal with a 1/2' Torque Wrench Universal Fit VW, Audi, BMW, Mercedes, Honda, Mazda Vehicles

The CV Boot Clamp Pliers Tool is perfect Tool for Ear-Type Clamp Crimping or Removal on VW, Audi, BMW, Mercedes, Honda, Mazda Vehicles to crimp and flatten the clamp on Ear-Type constant velocity joint boot clamps..
Constructed from heavy-duty steel with comfort grip handles.
Perfect fit all ear-type clamps including GM FWD outboard CV joints, also suitable for installation of certain clamps on fuel filters, water pumps and other cooling systems..
Equipped a "straight" crimper pliers on the end allows this CV Boot crimping on clamp ears to greatly prevent leakage..
Easily crimp the loop and then push down on the crimp to lock into place. 1/2" square holes allow you to use with a 1/2" extension handle or torque wrench..
100% MONEY BACK GUARANTEE. Buy with no risk..

Check Stock

120PCS 11 Sizes Single Ear Hose Clamps 304 Stainless Steel 6-33.1mm Stepless Cinch Rings Crimp Assortment Kit with Ear Clamp Pincer for Securing Pipe Hoses and Automotive Use By Hydencamm

✅[Multiple Choices] 11 sizes in the range of 6-33.1mm, 120 pcs ear clamps and 1 plier in a organized durable plastic box for easy storage and carrying. Wider range and more sizes..
✅[Superior Quality] High precision cinch crimp rings pinch clamps are made of 100% premium heavy duty 304 stainless steel material, more salt resistant, anti-rust, anti-corrosion, water proof and oil proof..
✅[Special Design] The edge of all stepless ear clamps are polished smooth, not damage the hose. 360°Stepless Design, no inner protrusion/gap. Narrow band design provide a more centralized seal pressure..
✅[Wide Application] Pinch clamps used in all plumbing system and in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive,industrial, boat/marine, household, indoor and outdoor..
✅[100% Satisfied] Solid and sturdy material ensure the crimp hose clamps last a long time. If not satisfied, please contact us, we will help you solve your concerns or provide a full refund..

Check Stock

Keadic 80Pcs 1/4\-15/16\ 304 Stainless Steel Single Ear Hose Clamps Pex Pinch Clamp Assortment Kit with Ear Clamp Pincer for Securing Pipe Hoses and Automotive Use

【HIGH QUALITY MATERIAL】 Made of 100% stainless steel, these clamps are corrosion resistant and anti-rust..
【SPECIAL DESIGN】 Special cochlear design provides a strong thermal expansion compensation function, which compensates for the dimensional change caused by the change of the hose, so that the pipe is always in a good sealing and fastening state. Narrow band design to provide a more centralized seal pressure, the clamping effect is obvious and stronger than that of the traditional screw type clamp..
【COMPLETE SPECIFICATIONS】This single ear hose clamp set covers 8 common sizes items : 6-7mm, 7-8.7mm, 8.8-10.5mm, 10.3-12.8mm, 12.8-15.3mm, 15.3-18.5mm, 17.8-21.0mm, 20.3-23.5mm, which are widely used in hoses and plastic pipes, especially suitable for beverage, automotive, marine, motorcycle, and industrial applications..
【CRIMPING PLIER TOOL】An useful Ear Clamp Pincer are included in this kit, with plastic coated handle, which is convenient for your installation widely applied to single ear hose clamps, double ear clamps，etc..
【RELIABLE AFTER-SALE SERVICES】We are confident enough with our products, believing that you won’t be regret if you purchase them. And if you feel confused about our products, please be free to contact me and....

Check Stock