ReviewsOne piece Conduit Clamps

Beaquicy STV-90 Dryer Duct Connector - Snap to Vent 90 Elbow - Indoor Hook-up Dryer Vent Kit

  • ✅【PRODUCT DESCRIPTION】: The STV-90 dryer duct exhaust connector consists of a buckle to the exhaust 90 elbow, a buckle connector and a sealing ring connected to the wall conduit or dryer conduit. 90 degree diameter elbow dryer connectors are used to attach semi-rigid or flexible dryer hoses without hose clamps. Made of silicone and other sturdy materials to ensure that dryer hose vent fittings do not crack, tear or squeeze when using connectors..
  • ✅【AIRTIGHT】: STV-90 dryer conduit connector Universal dryer connector for electric and gas dryers. The silicon seal ring of STV-90 dryer pipe connector provides you with a sealed dryer connection. The silicone seal has a strong viscosity and is not easy to fall off, making your dryer more efficient while consuming less energy, allowing clothes to dry faster and saving electricity..
  • ✅【90 DAYS WARRANTY】:The STV-90 dryer duct exhaust connector supports 90 days return and exchange. Our company attaches great importanc e to the shopping experience of each customer. Risk-free shopping, if you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve t....
Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,1inch50ft Electrical Conduit Kit,with5 Straight and3 Angle Fittings Included,1 in Dia 50FT

  • 【PREMIUM Liquid-Tight Conduit】- Length :50'，ID：1inch，OD：1.22inch， The Flexible Non Metallic Liquid Tight Electrical Conduit kit ​is....
  • 【Complete Accessories】-1-Inch 50Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.
  • 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
  • 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....
Check Stock

9 Pack | PVC Rooftop Support | Pipe Support | Can Be Cut to Desired Length | 100% Recycled PVC

  • Can Be Cut to Desired Lengths | Suggested minimum length is 6" (152.4 mm) to provide adequate stability..
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes.
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included).
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable.
Check Stock

Corner Clamps,Upgraded 90 Degree Right Angle Clamps Set of 4,Woodworking Clamp Tools,Adjustable Spring Loaded Square Clamp for Carpenter,Welding,Drilling,Cabinets,Photo Framing,Wood Working Gift

  • RUBBER PADS TO PROTECT WOOD PIECES: Each angle clamp includes 2 rubber pads to protect your wood pieces from any damage.The pads can be removed for....
  • QUALITY FRAMING CLAMPS: Not only for the 90-degree angle, T-joints, but also for the 45-degree saw. The 4 set clamps for woodworking are made of....
  • ONE-HAND OPERATION: The woodworking clamps are easy to use. You can open this clamp with one hand, and the other hand is free for the workpiece,....
  • ACCURATELY SET FOR EVERY RIGHT ANGLE: These compact clamps with its versatility allows to use it for framing, doweling, drilling, preparing cabinet,....
  • HIGH PRACTICALITY: Perfect for small wood working project, to build wooden boxes, picture frames, birdhouse,mailbox, dresser drawers assembly.
Check Stock

Bessey DUO65-8 24-Inch DuoKlamp One Hand Clamp/Spreader

  • Just turn the knob to change from clamping to spreading while using only one hand.
  • Large flat clamping jaws with soft pads allows clamping sensitive surfaces, right angles and both rounded and pointed work pieces.
  • 24" capacity with 800 lbs of clamping and spreading force.
  • Innovative pump lever allows effort free clamping or spreading.
  • Quick release of jaws with the push of a buttonDescriptionJMCDUO65-8 Features: -DUOKLAMP. -UNSPC CODE: 27112100. -Clamps Clamps mro plant maintenance clamp. -3 1/4IN x 24IN ONE-HANDED. Product Type: -Clamps..
Check Stock

STRUT 3/4\ CONDUIT CLAMP by UNISTRUT MfrPartNo RP1212EG

  • QUALITY AND DURABILITY – These 3/4-inch snap-on conduit straps are crafted from galvanized steel with a zinc coating that forms a protective layer. With its reinforced rib, this EMT one-hole pipe strap provides extra strength and durability..
  • EASY INSTALLATION – These one-hole design snap-on conduit straps are extremely simple to use. Simply snap the strap onto your conduit and use a screw to secure it onto any surface. They are perfect for both indoor and outdoor applications..
  • ACCURATE SIZES – Our Snap-On conduit straps are available in many sizes to fit many different pipes, cables, hoses, and tubes. Choose from a selection of 1/2 Inch, 3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch, and 2 Inch sizes..
  • VERSATILE – These snap-on straps can be used for a wide variety of tubes or pipes that range anywhere between EMT conduits to pipes, tubes, cables, and hoses..
  • WHY CHOOSE AIRMONT PRODUCTS? ABOUT US - Airmont Products manufactures a fine line of top-quality electrical supplies. Our EMT snap-on pipe straps are especially recognized as being durable, versatile, and easy to install. Customer satisfaction is our priority. Let us know how you liked this product!.
Check Stock

Fulton 2 Pack of Aluminum Universal Fence Clamps with a ¼ inch to 6¼ inch Clamping Capacity with Steel Threaded 3/8 inch Post

  • The Fulton Aluminum Universal Fence Clamps are the perfect solution for clamping auxiliary fences, stop blocks, setup blocks, corner clamps and more to vertical flat surfaces like fences without the clamps getting in the way. The clamp post arm fits into a 3/8” hole and is at a slight inward angle to keep the lower part of your fence or block up against a flat surface. Fitting into a hole on the top of the fence or block keeps the clamp completely out of the way unlike F-clamps or C-Clamps..
  • The versatility of these clamps allows you to use them in most any way imaginable to make your work flow quicker and easier. With these fully adjustable clamps, you can clamp stock pieces as small as ¼” and stock pieces all the way up to 6¼”. This means that you can attach your sub fences and more to most any table saw, router or even a band saw fence. You can even use these clamps to clamp blocks flat onto your workbench to act like a pseudo bench dog..
  • This pack of clamps includes two Fulton Aluminum Fence Clamps which is perfect for most fence or block applications. Two clamps also work well with 90 degree corner clamp squares with a 3/8” pre drilled hole opening on both sides of the clamping square. Some 90 degree clamping squares are plastic or a com....
Check Stock

Morris 19426 Heavy Duty Rigid Pipe Strap, Steel, 1 Hole, 1\ (Pack of 25)

  • Overall Size: 155x 30 x 80mm/ 6.10" x 1.18" x 3.15"(L*W*H).
  • Special slotted design makes it more sturdy and not easy to deform.
  • Made from 304 premium stainless steel material. Anti rust, anti-corrosion. Clamps are sturdy, strong and reliable.
  • The surface is super smooth and burr-free with the fine workmanship.
  • Use to secure rigid or IMC conduit to wood, masonry, widely used in stainless steel pipes, rubber hoses.
Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,1/2inch50ft Electrical Conduit Kit,with 5 Straight and 3 Angle Fittings Included,1/2 in Dia

  • 【PREMIUM Liquid-Tight Conduit】- Length:50"，ID：1/2inch，OD：0.83inch，Thick: 2.5 mm The Flexible Non Metallic Liquid Tight Electrical....
  • 【Complete Accessories】-1/2-Inch 50 Foot Flexible Electrical Conduit with 5 Straight and 390-Degree Conduit Connector Fittings.
  • 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
  • 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....
Check Stock

Lew Electric 504 FLOOR BOX COVER ( 504 )

  • Secures EMT conduit to surfaces such as wood and masonry where load bearing is required.
  • Zinc-plated steel for corrosion resistance.
  • Positively snaps on conduit when installed.
Check Stock

Fulton Spring Clamp Pliers with 13 Spring Clamps and Hip Clip Made in the USA

  • If you have ever attempted to firmly secure and clamp mitered corners then you know what kind of a challenge it can be to say the least. You could always try those large, cumbersome and very expensive parallel clamps to try and work each corner just right to hold your mitered corners together. That too can be extremely challenging and not to mention very costly..
  • The Fulton Miter Spring Clamps are the ideal and cost effective way to quickly and easily clamp mitered corners without all of the hassle you typically have with other clamps. The Spring Miter Clamps are made from a high strength steel. The clamps can be applied using your hand to squeeze the clamp to open the sharp, pointed tips or you can use the Miter Spring Pliers to make it super easy to to spread the tips apart..
  • Once you have the clamp tips spread apart, simply place the spring clamp onto the mitered corner you need to secure, then release the clamp so the tips pierce into the wood and keep your stock in place. Depending on the size of your project, you may need to use more than one spring clamp on each corner to hold your stock in place..
  • Unlike other available spring clamps, the Fulton Miter Spring Clamps don’t cut into your stock piece. The uniquely designed tips are designed to pie....
Check Stock