ReviewsOnly Fans

ID-COOLING HA-02 Fan Hub for Computer Internal Fans, 8 PWM Ports+8 ARGB Ports, ARGB Motherboard Sync, PWM Functional Fan Adapter

【1 to 8 Fan Hub】The fan hub splitter can support up to 8 fans, including a total of 8 4-pin PWM ports and 8 ARGB ports for ARGB fans and ARGB LED strips. The fan hub offers greater flexibility between motherboard and CPU cooling fans..
【PWM Functional Fan Adapter】Fan speed can be adjusted at the same time, only the speed of "Fan 1" can be identified by the system. The speed control function is unavailable for 3 pin fans, the attached 3 pin fans will run at maximum RPM..
【Widely Compatible】 The 1 to 8 fan adapter provides power supply and connectors for PC computer case internal fans..
【Easy Installation】 Double-sided adhesive on the back of the PCB board, which can be easily affixed to a flat place..
【Clean & Tidy】Black sleeved nylon braided cable, more durable, and make the inside of the PC case looks more clean & tidy..

Check Stock

Ceiling Fan Slope Ceiling Kit for Slopes up to 45 Degrees in Graphite

Modern Forms Slope Ceiling Kits should only be used with Modern Forms Ceiling Fans. Modern Forms accessories are manufactured to work with Modern Forms fans only, failure to use this accessory with a Modern Forms fan can result in damage to your fan..
Slope Ceiling Kits convert any Modern Forms Downrod Ceiling Fan to be installed on slopes up to 45 degrees. (NOTE: Kit includes a new Hanger Bracket, Knuckle Ball, and Canopy Cover. The downrod is not included, use downrod that came with fan or purchase a separate downrod (SKU # DR-XX) if a longer downrod length is needed)..
Downrod Ceiling Fans can be installed on slope ceilings with up to a 30 degree slope. Slope Ceiling Kits convert any Modern Forms Downrod Ceiling Fan so that they can be installed on slopes up to 45 degrees..
Available in a variety of finish options to match your fan finish..
UL & cUL Wet Location Listed for indoor or outdoor applications..

Check Stock

ID-COOLING FH-07 SATA Powered Fan Hub with 7 PWM Ports Hub Splitter for 4-Pin & 3-Pin Computer Internal Fans

【1-to-7 PWM Fan Hub】The fan hub splitter can support up to 7 fans. The extension cable offers greater flexibility between motherboard and CPU cooling fans..
【PWM Functional Fan Adapter】Fan speed can be adjusted at the same time, only the speed of “Fan 1” can be identified by the system. Speed control function is unavailable for 3 pin fans, the attached 3 pin fans will run at maximum RPM..
【Widely Compatible】 The 1 to 7 splitter provides power supply and connectors for PC computer case internal fans..
【Easy Installation】 Double-sided adhesive on the back of the PCB board, which can be easily affixed to a flat place..
【Clean & Tidy】Black sleeved nylon braided cable, more durable, and make the inside of the PC case looks more clean & tidy..

Check Stock

CRJ 4-Pin Molex to 4 x 3/4-Pin PC Case Fan Sleeved Adapter Cable

Power Four 3-Pin or 4-Pin (PWM Connector) PC Case Fans With A Molex Connector.
Fans Will Be Operated At The Fixed Molex Voltage Of 12V (Only 2 Pins In Connector Required).
Cable Is Compatible With Standard 3-Pin Fans As Well.
Quality High Density Black Sleeving For All Black Appearance.
Total Cable Length (Excluding Connectors): 10.5"/27cm.

Check Stock

DZS Elec 4Pin 1 to 3 Ways PWM Fan Splitter Cable Black Sleeved Fan Power Extension Cable 4Pin Female to 3X 4Pin Male 27cm/10.5 inches

4Pin 1 to 3 Ways PWM Fan Splitter Cable, to realize 3 fans powered by 1 interface with speed regulation..
High quality high density black sleeved cable, 24AWG, length is approx. 27cm / 10.5 inches..
The fan adapter has only one connector with a yellow RPM speed/tachometer line. Make the motherboard receive only one fan RPM speed reading without being confused by multiple fan readings..
The cable is compatible with 3-pin and 4-pin PC fans..
Can be used for a motherboard 4pin interface powering for multiple cooling fans and PWM speed control, lengthen and extend the motherboard 4-pin interface..

Check Stock

DZS Elec 4Pin 1 to 4 Ways PWM Fan Splitter Cable Black Sleeved Fan Power Extension Cable 4Pin Female to 4X 4Pin Male 27cm/10.5 inches

4Pin 1 to 4 Ways PWM Fan Splitter Cable, to realize 4 fans powered by 1 interface with speed regulation..
High quality high density black sleeved cable, 24AWG, length is approx. 27cm / 10.5 inches..
The fan adapter has only one connector with a yellow RPM speed/tachometer line. Make the motherboard receive only one fan RPM speed reading without being confused by multiple fan readings..
The cable is compatible with 3-pin and 4-pin PC fans..
Can be used for a motherboard 4pin interface powering for multiple cooling fans and PWM speed control, lengthen and extend the motherboard 4-pin interface..

Check Stock

TOPGREENER Kalide Combo Dimmer Switch with 3-Speed Fan Control, Light and Fan Combination Switch, Single Pole, 2.5A, 200W LED/CFL, Neutral Wire Not Required, TGDSFS3-W, White

Adjust fan speed and light level from one location with the Kalide combo wall switch.
designed for 3-speed mechanical fans with pull string control and compatible with dimmable LED, incandescent, and halogen lights.
fan slider features 3 speeds (not for variable type fans or remote controlled).
light slider provides full-range of dimming with a noticeable clicking sound when slid into the OFF position.
Made of Polycarbonate Thermoplastic material to provide the durability and resilience needed to withstand hard impacts and heavy force.
heat & fade resistance to temperatures over 100° to prevent discoloration.
supported by major-brand light bulbs from GE, Cree, Philips, Sylvania, Lithonia, Hyperikon, Amazon Basics, EcoSmart, and more.
not compatible with smart lighting fixtures.

Check Stock

6 inch RV Fan White Vent Fan Blade with 12V D-Shaft RV Vent Motor Replacement Camper Fan Blade Bathroom Fan Home Bathroom Mobile Home RV Motor

...ans such as competitor 3.5" (90mm) fans fail to do the job. It works great to clear out the high heat during RV season. **The fans are about 1-1.5" thick - make sure there is enough room for the fans to fit on your vent**.
RE-ENGINEERED STURDY MOUNTING BRACKETS FIT FIT AMERICAN RV VENTS - Unlike other vent fans that only fit European RVs and require zip ties to install, the Beech Lane vent fan has custom mounting brackets for easy installation on American RVs. **The fans are about 1-1.5" thick - make sure there is enough room for the fans to fit on your vent**.
CUSTOM USER-FRIENDLY REMOTE TO CONTROL MANUAL AND AUTO MODES - The vent fan comes equipped with a custom remote giving you full control to choose between a manual and an auto, temperature sensing mode..
ADJUSTABLE TEMPERATURE AUTO MODE FOR EASY USE - The included temperature probe allows you to pick a temperature that when reached the fan will automatically turn on, gradually increasing speed as the temperature rises above your set temperature..
LIFETIME MANUFACTURER WARRANTY - If the vent fan ever fails or is damaged, it is covered by a lifetime manufacturer warranty..

Check Stock

TOPGREENER Kalide Combo Dimmer Switch with 3-Speed Fan Control, Light and Fan Combination Switch, Single Pole, 2.5A, 200W LED/CFL, Neutral Wire Not Required, TGDSFS3-BK, Black

...material to provide the durability and resilience needed to withstand hard impacts and heavy force.
heat & fade resistance to temperatures over 100° to prevent discoloration.
supported by major-brand light bulbs from GE, Cree, Philips, Sylvania, Lithonia, Hyperikon, Amazon Basics, EcoSmart, and more.
not compatible with smart lighting fixtures.

Check Stock

140mm PC Computer Case Fan Dust Filter Grills with Magnet and Screws Ultra Fine Nylon Mesh Black Color - 4 Pack

【Block Dust Great】Upgrade Ultra Fine Nylon Mesh (80 Meshes) could Effectively Block Most of the Dust or Pet Hair, Great for Keeping Your Fans and....
【Keep Airflow Good】Ultra Fine Nylon Mesh Would not Block of the Airflow From the Fans, Keep Fans Efficiency and Air Circulation in the Case,....
【Magnet and Screws】Item Frame with Magnetic Strip and Screw Holes, Could Fixation Adapted to Various Material Conditions.
【Compatible with】Most 140mm x 140mm Fans or Vents (Note: item's Magnet can attract iron case only, Not attract aluminum case).
【Package Includes】4x Magnetic Nylon Filter + 16x Screws.

Check Stock

TOPGREENER Kalide Fan Speed Control Switch 3-Speed Fan Wall Switch Single Pole 120VAC 60Hz 2.5A Neutral Wire Not Required TGFS3-W White

Ditch the pull-chains and adjust fan speed from a convenient location with the Kalide fan speed wall switch.
Features an easy-to-use slider to adjust between 3 fan speeds.
to turn off, simply move the vertical slider all the way down until it noticeably....
Made of Polycarbonate Thermoplastic material to provide the durability and resilience needed to withstand hard impacts and heavy force.
Compatible with mechanical 3-speed fans up to 2.5A.
designed for 3-speed mechanical fans with pull string control.

Check Stock