ReviewsOpel Airbag Reseter Tool

8MILELAKE Car Camshaft Retaining Tool Kit EN 48383 and EN 46105 Fit for Cadillac, Buick, Saturn, fit for Pontiac, Chevrolet, Chevy 2.8L 3.0L 3.6L

  • APPLICATION: This EWK Camshaft Retaining Tool Kit is a direct replacement EN 46105 & EN 48383. this camshaft holding tool specifically designed to look and function the same as the original camshaft retaining tool on engine..
  • FIT FOR: This camshaft retaining tool set fit for Vauxhall/Opel/Saab/Cadillac/Holden 2.8i, 3.6i V6 engines Suitable for Engine codes: LP1, HFV6, A30XH, Z32SE, Z28NET, Z28NEL, A28NER, B284E, B284L.
  • FEATURE: Plates are oversized to prevent the valve covers being installed should the tools be accidentally left on the engine.
  • DURABLE MATERIAL: Made of premium alloy steel. Designed to firmly lock the camshafts in their required timing position without deformation..
  • PACKAGE INCLUDES: 3pcs x Camshaft Retaining Tool.
Check Stock

MUKCHAP 4 PCS Fan Clutch Wrench, 32mm Automotive Cooling Fan Clutch Nut Wrench & Water Pump Holder Removal Tool Kit for BMW Ford and More

  • The water pump sprocket retainer holding tool is used for holding timing chain in place so water pump can be removed for service. Prevent engine vibration and whining and to keep the timing chain in place to avoid camshaft readjustments.
  • The water pump sprocket retainer holding tool is compatible with GM, Vauxhall, and OPEL 2.2L 2.4L Ecotec motors, also fit for Chevrolet fit for Oldsmobile fit for Pontiac and Saturn vehicles.
  • Easy to Use: Simply remove the access plate, line up holes on the water pump tool to your sprocket.
  • Use included bolts and cover bolts to install the tool.
  • Made of higher carbon steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life. Water pump sprocket tool has a 3.9-inch (9.9cm) diameter and a 1.3-inch (3.3cm) depth.
  • The water pump pulley holder tool includes 1 pc water pump holding tool, 3pcs 5.5mm water pump bolts with 1.4-inch (3.5cm) length.
Check Stock

Sunluway 23 PCS Universal Terminal Release Tool Set, Wire Terminal Electrical Connector Removal Kit Crimp Pin Remover for American Domestic and Imported Vehicles

  • APPLICATION: Fits for BMW, Mercedes, VW, Jaguar, Porsche, Saab, Skoda, Ford, Renault, Citroen, Chrysler, Fiat, Honda, Mazda, Mitsubishi, Toyota, Seat and Opel vehicles.
  • MATERIAL: Constructed from high-standard steel with chrome finish for durability and rust-resistance.
  • COMFORTABLE GRIP: Rubber design handle provides unparalleled comfortable grip, and the mark on each handle is for quick reference to the fitment application chart.
  • EASY TO USE: Simply push and pull the terminal pins with the required tool for removal, and the tool using with minimal effort could eliminate damage to wires and terminal blocks.
  • 100% SATISFACTION GUARANTEE: If you're not 100% satisfied with our Terminal Release Tool Set, simply return it for a full refund in 30 days. Premium Support & 12 Months Warranty.
Check Stock

VXDAS EL50448 TPMS Rest Tool Compatible for GM Auto Tire Pressure Monitor Sensor TPMS Relearn Tool Compatible with Chevy/Buick/GMC/Opel/Cadillac Series Vehicles Pack of 2

  • NECESSARY TPMS TOOL:2pack EL50448 is an essential tool of replacement tire pressure sensor, tire pressure alarm remove or exchange tires.one is for....
  • WIDE VEHICLE COVERAGE:The tpms relearn tool Works on most GM (Chevy/Buick/GMC/Opel/Cadillac) equipped with Tire Pressure Monitor system (TPMS) sensor..
  • EASY TO USE: Super EL-50448 TPMS activation tool with ease, faster operation, activates the individual TPMS sensors by pressing one button..
  • SIMPLE AND INEXPENSIVE: Much better than going to the dealer or a tire store just to get your pressure sensors reset.2019 New Design updated chip and....
  • FREE WORRY: Real-time Customer Service, please feel free to contact with Seller if with any questions(One year warranty).note:9V battery should be in....
Check Stock

1970 Opel Kadett & GT Repair Shop Manual Reprint

  • 05/23/1970 (Publication Date) - Opel (Publisher).
Check Stock

EWK Engine Camshaft Tensioning Locking Alignment Timing Tool Kit for Chevy Cruze Aveo, Alfa Romeo, Fiat, Opel 16V 1.6 1.8 EN 6333 EN 6340

  • 【Must Have】Accurately fits Chevrolet, Fiats and Alfa Romeo 2003 - 2012 16V 1.6 1.8 engines. Comes with camshaft locking tools EN 6340, belt tensioner locking pins EN6333 and the other required kits for perfect camshaft alignment..
  • 【Built to Last】Made of corrosion-resistant carbon steel to maximize the durability. Designed to firmly lock the camshafts in their required timing position without deformation..
  • 【Wide Applications】Suitable for Chevrolet Aveo / Cruze / Orlando / Trax 1.6 1.8.
  • fit Opel / Vauxhall Astra-G /H /J / Corsa-D / Insignia / Mervia / Signum / Vectra-C / Zafira-B 2003-2011.
  • 【Complete Kit】Includes 1 Camshaft locking tool, 2 Camshaft gear locking tools, 1 Flywheel locking tool, 1 Engine Tensioner spanner, 1 V-ribbed belt tensioner locking tool, 1 Crankshaft locking tool, 1 Timing belt tensioner locking tool, and a carrying storage case..
  • 【Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistance..
Check Stock

VXDIAG VCX Nano GDS2 and Tech2Win Diagnostic Programming System for GM/Opel WiFi Version

  • This is Wifi version VXDIAG Nano for GM/OPEL, support device connect to laptop via USB or Wirelessly. Requires win 7 system computer, and GDS2 software need to install 64bit virtual machine. Tech2Win software need to install 32bit physic computer..
  • VXDIAG VCX NANO Box is PC-to-vehicle interface compatible with multiple software applications, minimizing your investment in multiple brand-specific diagnostic interfaces.
  • VXDIAG VCX Nano for GM/OPEL compatible with GDS and Tech2win software, support for GM/OPEL Diagnose and programming,for programming function, you would need buy software subscription online.
  • Fully compatible with SAE-J2534-1 & SAE-J2534-2.(Please download the latest vxmanager from vxdiag official website. Use new vxmanager to update firmware and driver and then update your device authorization.).
  • License renew: Please update your firmware in vxmanager first, then update your device license. You can renew by yourself.
Check Stock

JDIAG TPMS Relearn Tool for GM and Ford Series Vehicles Super EL50448 Auto Tire Pressure Monitor Sensor Activation Reset Tool Upgrade Edition

  • 2022 Updated Generation Super EL50448 TPMS relearn tool is an essential tool of replacement tire pressure sensor, tire pressure alarm remove or exchange tires..
  • This TPMS reset tool works on most GM/Ford/Buick/Cadillac/Chevy/GMC/Saturn/Pontiac/Saab/Opel/Lincoln/Mercury equipped with 315/433 MHz tire sensor..
  • Super EL50448 can help you reset all tires much easier just with 3 steps. Ensure that the vehicle is in the TPMS Learn Mode, and follow the service procedure. Hold tool against the sidewall of the tire, near the valve stem. Depress Learn button while holding the tool against the tire sidewall..
  • Tire pressure monitor sensor activation tool is simple and fast ,activates the individual TPM sensor with the press of one button easily within 1-2 Mins.Save your almost 20-80$,.Much better than going to the dealer or a tire store just to get your pressure sensors reset..
  • Notice: 1. When using Super EL50448, please make sure antenna in correct position. 2. Please make sure the 9v battery in good condition. 3.For Different vehicle EL50448 may need different times to reset all of your tire sensors after rotation. 4. 12 months guarantee, please feel free to contact us if you have any trouble during use..
Check Stock

Camshaft Actuator Locking Timing Tool Cam Phaser Retainer Water Pump Sprocket Retainer Holding Tool Compatible with GM Ecotec 2.0 2.4 Engine Replace EN48953

  • Application: Fit GM 2.0 2.4 ECOTEC Engine, OEM Equivalent Part Number: EN 48953.compatible with OPEL :Astra J OPC (2012-).
  • Function: Designed to help out in torquing cam to pulley bolts on the GM Ecotec 2.0 2.4, this kit include camshaft actuator locking tool and water....
  • Not Easy Bent: Our cam phaser retainer tool made of high hardness steel, not soft steel, not alloy, set the camshaft timing, the tabs not easy bent....
  • 12 Months Warranty: We offer 12 months warranty, we will refund or replace, if the camshaft actuator locking timing tool have any quality problem.
Check Stock

JDIAG 2IN1 TPMS Relearn Tool Super EL50448 for GM and Ford Tire Pressure Monitor Sensor TPMS Reset Tool 2023 Edition

  • 2IN1 TPMS RESET TOOL: JDIAG tpms relearn tool works on both GM and Ford Series vehicles Including Opel, Buick, Cadillac, Chevrolet, GMC, GM, Lincoln, Mercury, Mazda, F150, F250, Focus, Fusion, etc..
  • COMPATIBLE: GM tpms relearn tool supports the vehicles with the original tire pressure monitoring system, which can enter the TPMS learning mode and 4 tires' pressure digital display based on 315/433Mhz. More than 4 tires of heavy trucks are not compatible.
  • the external TPMS system is not supported..
  • ESSENTIAL TOOL: Need to use this tire pressure relearn tool after doing tire rotation, replacement tire pressure sensors, tire pressure alarm light removal, or exchanging summer & winter tires. Please reset in the correct mode, if it fails to relearn in the correct mode, please try to relearn again in another mode..
  • FRIENDLY: Simple and fast response tire reset tool awakens the individual TPMS sensor easily by pressing the power button within 1 Min. Turn off the tire pressure light by yourself and save $50-100 each time instead of going to dealers. [9V battery is not included and please make sure to use a brand new 9V battery, the magnitude of the battery voltage affects the signal strength of the product].
  • RELIABLE: JDIAG Super EL50448 tpms sensor tool is wi....
Check Stock

ABN CV Joint Ear Clamp Banding Tool – 10mm Fuel Hose, Cooling System, Vacuum Hoses Clamping

  • ...ding Tool – 10mm Fuel Hose Vacuum Hoses Clamping Tool to tighten and secure a CV boot banding strap quickly and easily.
  • [Fits Your Needs]: Use with banding straps up to 10 mm (2/5in) wide.
  • Suitable for ear-type hose clips found on a fuel, cooling, and vacuum hoses and on steering gear gaiters.
  • Compatible with VAG, Opel, BMW, Mercedes Benz, Honda, Mazda, and more.
  • [Easy To Use]: Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip tool nose and through winding mandrel slot.
  • Place 1/2-inch ratchet wrench on winding mandrel.
  • Bend band back over boot and onto clip to apply tension and cut.
  • Fold remaining band tail into clip and secure by tapping down clip ears.
  • [Comfortable Grip]: CV boot clamp tool features a 4.25-inch (10.8 cm) long plastic handle and a 1-inch (2.5 cm) long rubber grips on side levers for ultimate control, less user fatigue, and more productivity.
  • [Built To Last]: Constructed from zinc-plated alloy steel.
  • Standard band clamp crimper banding tool works with the installer’s ratchet and 1/2-inch socket (or included lever) to tighten and hold a band securely until clamped.
Check Stock