ReviewsOpen source Firmware

BIGTREETECH Smart Filament Sensor Filament Break Detection Module 3D Printer Parts for 1.75mm Filament SKR V1.3 Mini E3 GEN V1.4

  • 1) It can detect nozzle plugs, consumables are entangled, and the consumables caused by extruder failure are abnormally extruded. Happening..
  • 2) It can detect that the consumables such as consumables are broken and the consumables are not used..
  • 3) Applies to the open source firmware marlin 2.0.x. Marlin2.0 uses powerful development tools, Visual Studio Code integrated development environment: support for online debugging, more helpful for product development and performance optimization, C language development, low development threshold..
  • 4) Support the motherboard with the break detection interface..
  • 5) Support screen 2004, 12864, TFT24 (12864 mode), TFT35_V3.0 (12864 mode)..
Check Stock

Hosyond 3Pcs ESP8266 NodeMCU CP2102 ESP-12E Wireless WiFi Module Internet of Things Development Board Compatible with Arduino IDE/Micropython

  • Not only it is easy to program for this controller by using the CP2102-USB interface,but also unnecessary to press the flash and reset buttons before each flash operation..
  • NodeMcu is an open source Lua based firmware for the ESP8266, ultra low cost wireless modules, development boards for rapid prototyping, integrated with ESP8266 chips..
  • The ESP8266 has powerful on-board processing and storage capabilities, and can be integrated with sensors and other application-specific devices through its GPIOs..
  • It is compatible with Arduino IDE,works great with the latest Mongoose IoT/Micropython..
  • Modern Internet development tools can use the built-in API to instantly put your idea on the fast track..
Check Stock

Creality CR-10 Smart Motherboard CR-10 Smart 3D Printer 32-bit Silent Mainboard with TMC2208+A4988 Stepper Driver V1.2 Silent Mother Board for CR-10 Smart

  • The main control uses the ARM-level Cortex-M4 series with a 32-bit dominant frequency of 168 MHz STM32F407ZGT6 chip, performance is greatly improved..
  • Equipped with highly modular open source firmware Marlin2.0, it is convenient for users to DIY and further-development, to avoid the worry of not....
  • Motor driver support :TMC5160,TMC2208,TMC2130,ST820,LV8729, DRV8825,A4988, etc.Display screen support: BIGTREETECH- 2.8 inch TFT,BIGTREETECH-3.5 inch....
  • Support Serial WIFI Online Printing. 6 motor drives, 3 extruders, 3 CNC fans. Reserve extended ports of BL Touch, PWM, ADC, UART, I2C and SPI.
Check Stock

InkjetsClub Compatible Ink Cartridge Replacement for 952 XL Black & 952 Colors. Works with OfficeJet Pro 8710 8720 7720 7740 8210 8702 8715 8725 8730 8740 Printers. (Reads No or Low Ink Level), 4 Pack

  • ... any updates which state an update is necessary on the printer for performance. By accepting updates from HP for your printer, the updates have the ability to disable the cartridges and make the inks unusable. Updated software will also not be covered by the cartridges warranty..
  • ✅ WORKS WITH HP's LATEST FIRMWARE UPDATES: Printer Compatibility for the following HP Officejet Pro's HP OfficeJet Pro 8710, OfficeJet Pro 8720, OfficeJet Pro 8740, OfficeJet Pro 7720, OfficeJet Pro 7740, OfficeJet Pro 8216 8200 8210 8218 8700 8702 8714 8715 8716 8717 8724 8725 8726 8727 8728 8730 8734 8735 8736 8743 8744 8745 8746 8747 HP Printers..
  • ✅ HIGHEST PAGE YIELD FOR 952 XL SERIES BLACK 952XL INK: Get upwards of 2, 000 pages per black 952XL ink cartridge & 800 pages per color 952 ink cartridge color. Black 952XL is Rated to Have 50% More Ink than Standard Cartridges. Our 952XL and 952 ink has been remanufactured to the highest compacity levels offered out of HP ink tanks..
  • ✅ 100% GUARANTEED & MONEY BACK GUARANTEE: We truly believe in the great value of our 952xl inkjets cartridges we stand by our 100% guarantee no questions asked returns for any defects you may face while using our cartridge*. HP Firmware updates which are left on Automatic will deem the....
Check Stock

BIGTREETECH SKR PRO V1.2 3D Printer Control Board 32-bit CPU Mother Board Support TMC2208 Stepper Motor Driver TFT35 Touch Screen for 3D Printer Part

  • √1.【SKR PRO V1.2】:Aiming at some problems existing in 3D printed motherboards in the market. Bigtree Technology Co., Ltd. launched a high....
  • √2. 【Main Chip】:The main control uses the ARM-level Cortex-M4 series with a 32-bit dominant frequency of 168 MHz STM32F407ZGT6 chip, performance....
  • √3.【Easy to Use】:Equipped with highly modular open source firmware Marlin2.0, it is convenient for users to DIY and further-development, to....
  • √4.【Display】:BIGTREETECH-2.8-inchTFT, and BIGTREETECH-3.5-inchTFT color touch screens are compatible, as are LCD2004 and LCD12864 screens.
  • √5.【Dual Z】: Support for dual Z axis printers (series dual Z).
Check Stock

Linksys WRT3200ACM: AC3200 Dual-Band Gigabit Wi-Fi Router, Beamforming Tri-Stream Wireless Signal, Ethernet Ports, MU-MIMO (Black, Blue)

  • Fast wireless router provides Wi-Fi coverage for your home (works with existing modem).
  • Open source firmware offers advanced customization.
  • Certified operating systems: MacOS (10.X or higher), Windows 7, Windows 8.1 (Works with Windows 10).
  • Tri stream 160 technology doubles bandwidth from 80 MHz to 160 MHz.
  • Enjoy 4K HD streaming, gaming and more in high quality without buffering.
  • Dual band Wi-Fi speeds up to 2.6 Gbps (2.4 GHz / 600 Mbps) plus (5 GHz / 2600 Mbps). Operating temperature: 32 to 104 F (0 to 40 C).
  • MU MIMO (Multi User Multiple Input Multiple Output) provides Wi-Fi to multiple devices at once, at the same high speed.
  • Amazon exclusive extended 18 month warranty.
Check Stock

ALMOCN 3D Printer Reprap Smart Controller LCD 12864 Graphic Smart Display Controller Board with Adapter and Cable for RAMPS 1.4 Reprap 3D Printer Kit

  • 4.3 inch,800*480 IPS,Capacitive Touch Screen,Phone Cord or Flat Ribbon Cable connect to the motherboard.
  • Opensource,you can customize your own UI and functions,the source code:https://github.com/makerbase-mks/MKS-H43-firmware.
  • Only work with motherboard which have card slot(such as MKS SGen_L,MKS Robin series,SKR series,etc.),connect....
  • Motherboard must use marlin2.x firmware and config like this:https://github.com/makerbase-mks/MKS-H43#marlin-config.
  • Instruction manual:https://github.com/makerbase-mks/MKS-H43.
Check Stock

KOOBOOK 1Pcs 3D Printer Control Board Controller PCB Board MKS Gen L V1.0 Integrate Ramps Motherboard 12/24V

  • 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support 4988 drive and 8825 drive, TMC2100 drive..
  • Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly..
  • 24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
  • It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 and TFT32 touch screen..
  • The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive..
Check Stock

DORHEA 3Pcs ESP32 Development Board WiFi + Bluetooth Microcontroller Dual Cores ESP-32 ESP-32S Board ESP-WROOM-32 CP2102 Chip 38Pin Narrow Version 2 in 1 Dual Core Low Power Consumption ESP-32S

  • The esp32s module has 38 pins and has more features than a 30-pin module, narrower width, compatible with breadboard.
  • ESP32 is a WiFi+Bluetooth chip developed. It is designed to provide access network functionality for embedded products..
  • ESP32s development board support Lua program, easy to develop, support of three modes: AP, STA and AP + STA..
  • NodeMCU-32S is based on the ESP-32S module. The platform uses many open source projects , this module is safe, reliable, and scalable to a variety of applications..
  • NodeMCU-32S includes firmware that can run on ESP32 Wi-Fi SoC chip, and hardware based on ESP-32S module..
Check Stock

TP-Link N300 WiFi Extender(TL-WA855RE)-WiFi Range Extender, up to 300Mbps speed, Wireless Signal Booster and Access Point, Single Band 2.4Ghz Only

  • Extend Wi-Fi Coverage - Boost Internet Wi-Fi Coverage up to 800 Square feet - Compatible with any Wi-Fi Router, Gateway, Access Point.
  • Eliminate Wi-Fi Dead Zones - Enjoy Lag-Free connection to any type of devices, including wired devices via Ethernet Port.
  • Stay connected - Expand Wi-Fi coverage for your Smart Phones, Smart TV, Fire Stick, Google Chromecast, Web Browsing, Alexa Echo, Ring and more.
  • Easy Set Up - 2 simple taps and you are ready to connect, smart indicator light helps to install in best optimal location.
  • Single Band 2.4GHz - 2 external Antennas with MIMO technology for improved range versus standard range extenders. The product may not be compatible with routers or gateways with firmware that has been altered, is based on open source programs, or is non-standard or outdated.
Check Stock

GL.iNet GL-MT300N-V2(Mango) Portable Mini Travel Wireless Pocket VPN Router - WiFi Router/Access Point/Extender/WDS | OpenWrt | 2 x Ethernet Ports | OpenVPN/Wireguard VPN | USB 2.0 Port | 128MB RAM

  • 【WIRELESS MOBILE MINI TRAVEL ROUTER】 Convert a public network (wired or wireless) to a private Wi-Fi for secure surfing. Tethering. Powered by any laptop USB, power banks or 5V DC adapters (sold separately). 39g (1.41 Oz) only, portable and pocket friendly. 2.4GHz ONLY.
  • 【OPEN SOURCE & PROGRAMMABLE】 OpenWrt pre-installed, USB disk extendable..
  • 【LARGER STORAGE & EXTENDABILITY】 128MB RAM, 16MB Flash ROM, dual Ethernet ports, UART and GPIOs available for hardware DIY..
  • 【OPENVPN CLIENT】 OpenVPN client pre-installed, compatible with 30+ VPN service providers..
  • 【PACKAGE CONTENTS】 GL-MT300N-V2 (Mango) mini router (1-year Warranty), USB cable, Ethernet cable, User Manual. Please update to the latest firmware..
Check Stock