ReviewsOptical Fiber Jumper

FiberCablesDirect - 3M OM1 LC LC Fiber Patch Cable | 1Gb Duplex 62.5/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M - 300M | 1gb 10gb lc-lc mmf lc-upc sfp 1gbase mmd dx pvc ofnr

...inance and General Commercial, Computer Networking Applications..
Fiber Patch Cable Details: 3 Meter (9.84 feet), Duplex (2 fiber strands), 2.0mm Outer Diameter, Zip-Cord Reinforced, LC to LC Terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -25 dB), Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
Core / Cladding: Corning 62.5µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Optical Modality Details for OM1 Ethernet Over Multimode Fiber: 1Gb Ethernet Distance of 300 Meters at 850 nm / 600 Meters at 1310 nm. 10Gb Ethernet Distance of 33 Meters at 850/1300 nm. OM1 Bandwidth is 160-200/500 MHz-km @850/1300 nm..
Durable Construction, Commercial Grade, Cost Effective and Built to Last | 100% Lifetime Warranty on All Fiber Cables Direct Products. Superior packaging for safe delivery anywhere in the world, using any available carrier and ....

Check Stock

FiberCablesDirect - 3M OM2 LC SC Fiber Patch Cable | 1Gb Duplex 50/125 LC to SC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 1gb 10gb mmf upc sfp+ 1gbase mmd dplx pvc ofnr om2-lc-sc

...einforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
Fiber Patch Cable Details: 3 Meter (9.84 feet), Duplex (2 fiber strands), 2.0 mm, Outer Diameter, Zip-Cord Reinforced, LC to SC Terminated, Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Optical Modality Details for OM2 Ethernet Over Multimode Fiber: 500/500 MHz-km @850/1300 nm (OM2 - Laser-rated for GbE LANs) | 1Gb Ethernet Distance is 550 Meters at 850/1300 nm | 10Gb Ethernet Distance is 82 Meters at 850/1300 nm..

Check Stock

FiberCablesDirect - 1M OM1 LC LC Fiber Patch Cable | 1Gb Duplex 62.5/125 LC to LC Multimode Jumper 1 Meter (3.28ft) | Length Options: 0.5M - 300M | 1gb 10gb mmf lc-upc sfp 1gbase mmd dx pvc ofnr lc-lc

...Finance and General Commercial, Computer Networking Applications..
Fiber Patch Cable Details: 1 Meter (3.28 feet), Duplex (2 fiber strands), 2.0mm Outer Diameter, Zip-Cord Reinforced, LC to LC Terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -25 dB), Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
Core / Cladding: Corning 62.5µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Optical Modality Details for OM1 Ethernet Over Multimode Fiber: 1Gb Ethernet Distance of 300 Meters at 850 nm / 600 Meters at 1310 nm. 10Gb Ethernet Distance of 33 Meters at 850/1300 nm. OM1 Bandwidth is 160-200/500 MHz-km @850/1300 nm..
Durable Construction, Commercial Grade, Cost Effective and Built to Last | 100% Lifetime Warranty on All Fiber Cables Direct Products. Superior packaging for safe delivery anywhere in the world, using any available carrier and selected....

Check Stock

GiTi SFP 10G SFP+ DAC Cable, 10GBASE-CU Twinax SFP+ Cable Direct Attach Copper(DAC) Passive Cable Cisco Compatible for SFP-H10GB-CU0.5M Ubiquiti D-Link Supermicro Netgear Mikrotik, 0.5m (1.64ft)

Product Feature: 10Gb SFP+ to SFP+ DAC twinax passive cable 0.5m(1.6ft). 30AWG. High quality chip, fast transmission and low power consumption. All sfp+ dac cables come with dust cover and anti-static packaging..
Strict Quality Test: Each DAC cable must pass the signal integrity test and compatibility test before shipment. Compliant to SFP+ MAS, SFF-8432 and RoHS compatible. I/O Connector designed for high speed differential signal applications..
Widely Compatible: GiTi SFP 10Gbase sfp+ dac cable is compatible for Cisco SFP-H10GB-CU0.5M, Meraki, Ubiquit, Mikrotik, Intel, Fortinet, Netgear, D-Link, TP-Link, Linksys, Broadcom, Zyxel, etc..
Cost-saving & Effective: 1*twinax cable + 2*SFP+ connectors is equivalent to a 2*10G sfp+ optical module plus an optical fiber jumper, budget-saving, environmental-friendly, stability and durability, no need to expose interfaces and repeated plugging and unplugging..
Applications: 10g sfp+ cable is widely used in fiber switch, router, server,firewall, NIC, media converter, data centers, storage area networks, network attached storage, and other fiber optic equipments with SFP+ ports etc..

Check Stock

CableRack 1 Meter LC to LC Single Mode Fiber 9/125 Fiber Patch Cable (5-Pack)

Premium quality LC to LC single mode fiber patch cable for connecting singlemode optical networking devices in datacenter applications. Fiber patch cable single mode is immune to electrical interference and provides Ethernet connectivity up to 10GB. Single mode fiber cable is commonly used between LX and LH SFP optics for both 1GB and 10GB interconnects..
Only Corning glass is used in CableRack brand singlemode fiber LC to LC fiber jumpers. You’ll find other sellers mistakenly referring to this cable at OS2, however this cable is actually OS1. OS2 is reserved for loose tube applications over bridges and between buildings. OS1 is for shorter lengths between network devices. The glass fiber insde OS1 and OS2, however is identical..
All CableRack fiber optic patch cable LC to LC are fully tested and each package includes the output test results including insertion and DB loss, so you be sure your LC singlemode patch cable meets the highest quality standards. We carry LC single mode patch cables in a varienty of lengths and connector options in our Amazon store. Simply click on our brand name above to view all available products..
Single mode LC to LC fiber patch cable solutions are critical to high speed network solutions in the datacenter. These ....

Check Stock

SC/UPC Fiber Optic Attenuator 10dB, 2 Pack，in-Line Attenuator, Male/Female, Single-Mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB

✅SC/UPC Fiber Optic Attenuato: SC/UPC Male to SC/UPC Female, 10dB, Singlemode fixed, Ceramic Core material, 2 Pack. Provide SC adapters to ensure the connection between fiber patch cable..
✅Low Insert-loss & High Return-loss: Polarization dependent loss ≤0.2dB and Return Loss: ≥ 50dB. Using an attenuator to prevent over saturating an optical receiver when the optical power is too high and ensures low bit error rates preventing damage to receiving fiber optic equipment..
✅Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
✅Feature: Light weight, small volume, high accuracy, good stability and convenient operation..
✅Attenuator Application: Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver..

Check Stock

6 Pcs Fiber Optical Tool Accessory Fiber Sleeve Core Spare Ceramic Inserts and Mental Heads for Visual Fault Locator Fiber Cable Tester

It is suitable for connecting home butterfly cable.
Using V groove butt joint technology mature, applicable to the multimode optical fiber connection.
Free offixture design, operation time less than a minute.
For fiber optic butting optical fiber or optical fiber butt pigtail, this is to do joint,.
(butting optical fiber pigtail pigtail fiber core refers to head butt fiber and pigtail instead of the former said), for the cold connection thing called optical fiber cold sub..

Check Stock

Digital Toslink Fiber Optical Audio Splitter Cable 1 in 2 Out HOSONGIN Toslink Fiber Optic Adapter Cable Fiber Converter Digital Optical Audio Adapter Cable

Toslink Fiber Optical Audio Splitter 1 in 2 Out: HOSONGIN Toslink Fiber Optical Audio Splitter supports 1 male input to 2 female outputs, you can....
Toslink Fiber Optical Audio Switch 2x1: You can connect 2 female inputs and 1 male output. When using one device of the female inputs, you only need....
Enjoy Excellent Sound Experience: HOSONGIN Toslink Fiber Optical Audio Splitter adopted 24k gold connector, High quality low-loss Fiber optic core and....
Wide Application: HOSONGIN Toslink Fiber Optical Audio Splitter ideal for connecting your TV, digital TV set-top box, CD/DVD player, PS3/PS4/Xbox....
Great Product & Perfect Service: HOSONGIN Toslink Fiber Optical Audio Splitter is solid comes no extra power is needed. Package include: 1 x HOSONGIN....

Check Stock

LC/UPC Fiber Optic Attenuator 5dB, in-Line Attenuator, Male/Female, Single-mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB, 10 Pack

Connector/Connection Polish: LC/UPC Male to LC/UPC Female, 10 Pack.
Low Insert-loss & High Return-loss: Optical fibers are connected by adapters through internal open sleeves. Provide LC adapters to ensure the connection between fiber patch cable..
Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
Feature: Light weight, small volume, high accuracy, good stability and convenient operation..

Check Stock

Blackmagic Design Mini Converter Optical Fiber 12G

SDI Video Inputs: 1 x SD, HD and 12G-SDI Video and 1 x Optical Fiber Input..
SDI Video Outputs: Automatically matches the SD, HD and 12G-SDI video input on the Optical Fiber..
Optical Fiber Video Inputs: 1 x 10 bit SD/HD/12G- SDI switchable..
Optical Fiber Video Outputs: Automatically matches the SD, HD and 12G-SDI video input..
Multi Rate Support: Auto detection of SD, HD or 12G-SDI..

Check Stock

Fiber Optic Drop Cable Stripper for FTTH Drop Cables (Stripping Plier for Rubber-insulated Optical Cable) and CFS-3 Fiber Optic Stripper ( 3 Port Hole Fiber Optic Stripping Tool ), Fiber Tool Kit

【FTTH Cable Striping Plier】The blade is sharp, which can easily strip the thread. It will not damage the optical fiber core when stripping the outer cable. The blade is not exposed, and it can prevent blunt objects from colliding with the blade and causing damage to the blade. It also can prevent the blade from scratching the user. 2.4-inch scale ruler, which is clear to ensure the accuracy of the peeling length. You can choose the peeling length you need. Easy to use, increase work efficiency..
【FTTH Cable Striping Plier Applicability】Adaptive range: Indoor 3mm (W) * 2mm (H) optical cable.
Adaptive optical fiber: 1/2 core optical fiber.
Adaptive coating diameter of optical fiber: Φ0.25mm & Φ0.9.
Adaptive cladding diameter of optical fiber: 125μm..
【CFS-3 Fiber Optic Stripper】 For stripping 250 micron buffer coating from 125 micron optical fiber,All stripping surfaces are manufactured to precise tolerances to assure clean,smooth strips. Precision Diameter Hole & V-Opening in Blade allow for accurate buffer coating removal,Every fiber stripping tool is tested after production to ensure a consistent high quality cut out of the box..
【CFS-3 Stripper Three-port design】Hole (1) 2 - 3 mm fiber jacket cuts down to the 600 - 900 micron buffer....

Check Stock