ReviewsOptical Fiber Laser

SC/UPC Fiber Optic Attenuator 10dB, 2 Pack，in-Line Attenuator, Male/Female, Single-Mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB

✅SC/UPC Fiber Optic Attenuato: SC/UPC Male to SC/UPC Female, 10dB, Singlemode fixed, Ceramic Core material, 2 Pack. Provide SC adapters to ensure the connection between fiber patch cable..
✅Low Insert-loss & High Return-loss: Polarization dependent loss ≤0.2dB and Return Loss: ≥ 50dB. Using an attenuator to prevent over saturating an optical receiver when the optical power is too high and ensures low bit error rates preventing damage to receiving fiber optic equipment..
✅Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
✅Feature: Light weight, small volume, high accuracy, good stability and convenient operation..
✅Attenuator Application: Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver..

Check Stock

FiberCablesDirect - 3M OM2 LC SC Fiber Patch Cable | 1Gb Duplex 50/125 LC to SC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 1gb 10gb mmf upc sfp+ 1gbase mmd dplx pvc ofnr om2-lc-sc

...einforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
Fiber Patch Cable Details: 3 Meter (9.84 feet), Duplex (2 fiber strands), 2.0 mm, Outer Diameter, Zip-Cord Reinforced, LC to SC Terminated, Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Optical Modality Details for OM2 Ethernet Over Multimode Fiber: 500/500 MHz-km @850/1300 nm (OM2 - Laser-rated for GbE LANs) | 1Gb Ethernet Distance is 550 Meters at 850/1300 nm | 10Gb Ethernet Distance is 82 Meters at 850/1300 nm..

Check Stock

6 Pcs Fiber Optical Tool Accessory Fiber Sleeve Core Spare Ceramic Inserts and Mental Heads for Visual Fault Locator Fiber Cable Tester

It is suitable for connecting home butterfly cable.
Using V groove butt joint technology mature, applicable to the multimode optical fiber connection.
Free offixture design, operation time less than a minute.
For fiber optic butting optical fiber or optical fiber butt pigtail, this is to do joint,.
(butting optical fiber pigtail pigtail fiber core refers to head butt fiber and pigtail instead of the former said), for the cold connection thing called optical fiber cold sub..

Check Stock

Digital Toslink Fiber Optical Audio Splitter Cable 1 in 2 Out HOSONGIN Toslink Fiber Optic Adapter Cable Fiber Converter Digital Optical Audio Adapter Cable

Toslink Fiber Optical Audio Splitter 1 in 2 Out: HOSONGIN Toslink Fiber Optical Audio Splitter supports 1 male input to 2 female outputs, you can....
Toslink Fiber Optical Audio Switch 2x1: You can connect 2 female inputs and 1 male output. When using one device of the female inputs, you only need....
Enjoy Excellent Sound Experience: HOSONGIN Toslink Fiber Optical Audio Splitter adopted 24k gold connector, High quality low-loss Fiber optic core and....
Wide Application: HOSONGIN Toslink Fiber Optical Audio Splitter ideal for connecting your TV, digital TV set-top box, CD/DVD player, PS3/PS4/Xbox....
Great Product & Perfect Service: HOSONGIN Toslink Fiber Optical Audio Splitter is solid comes no extra power is needed. Package include: 1 x HOSONGIN....

Check Stock

Laser Lens, KSS-240A Laser Pickup Electronic Component Single Head Laser Optical Lens for DVD Player

Product Description:It is a great Optical laser lens replacement for the worn out or damaged laser lens..
Application:The optical pick-up laser is the heart of the optical drive and the most sophisticated part. It is mainly responsible for data reading..
Materials:Forged with high quality materials, fine workmanship, standardized design..
After Sale Service : If you do not satisfy with our products or if you have any questions, please come to us. We would work out satisfactory solution to all your problems. 24 hours quick response..

Check Stock

30-06 25-06 and 270 Cartridge Laser Bore Sighter .270 Red Laser Boresight Red Laser Bore Sight

Simply chamber the bore sight like a regular bullet and a laser dot will show exactly where the rifle.
It projects a straight laser beam allowing precise optical adjustments to sight in your scopes & sights without firing any ammo.

Check Stock

LC/UPC Fiber Optic Attenuator 5dB, in-Line Attenuator, Male/Female, Single-mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB, 10 Pack

Connector/Connection Polish: LC/UPC Male to LC/UPC Female, 10 Pack.
Low Insert-loss & High Return-loss: Optical fibers are connected by adapters through internal open sleeves. Provide LC adapters to ensure the connection between fiber patch cable..
Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
Feature: Light weight, small volume, high accuracy, good stability and convenient operation..

Check Stock

Blackmagic Design Mini Converter Optical Fiber 12G

SDI Video Inputs: 1 x SD, HD and 12G-SDI Video and 1 x Optical Fiber Input..
SDI Video Outputs: Automatically matches the SD, HD and 12G-SDI video input on the Optical Fiber..
Optical Fiber Video Inputs: 1 x 10 bit SD/HD/12G- SDI switchable..
Optical Fiber Video Outputs: Automatically matches the SD, HD and 12G-SDI video input..
Multi Rate Support: Auto detection of SD, HD or 12G-SDI..

Check Stock

Fiber Optic Drop Cable Stripper for FTTH Drop Cables (Stripping Plier for Rubber-insulated Optical Cable) and CFS-3 Fiber Optic Stripper ( 3 Port Hole Fiber Optic Stripping Tool ), Fiber Tool Kit

【FTTH Cable Striping Plier】The blade is sharp, which can easily strip the thread. It will not damage the optical fiber core when stripping the outer cable. The blade is not exposed, and it can prevent blunt objects from colliding with the blade and causing damage to the blade. It also can prevent the blade from scratching the user. 2.4-inch scale ruler, which is clear to ensure the accuracy of the peeling length. You can choose the peeling length you need. Easy to use, increase work efficiency..
【FTTH Cable Striping Plier Applicability】Adaptive range: Indoor 3mm (W) * 2mm (H) optical cable.
Adaptive optical fiber: 1/2 core optical fiber.
Adaptive coating diameter of optical fiber: Φ0.25mm & Φ0.9.
Adaptive cladding diameter of optical fiber: 125μm..
【CFS-3 Fiber Optic Stripper】 For stripping 250 micron buffer coating from 125 micron optical fiber,All stripping surfaces are manufactured to precise tolerances to assure clean,smooth strips. Precision Diameter Hole & V-Opening in Blade allow for accurate buffer coating removal,Every fiber stripping tool is tested after production to ensure a consistent high quality cut out of the box..
【CFS-3 Stripper Three-port design】Hole (1) 2 - 3 mm fiber jacket cuts down to the 600 - 900 micron buffer....

Check Stock

Ledesma NAT Letter Size 8.5 x11 Natural Sugarcane Pulp Printer Paper / 3 Reams 1500 sheets

Natural sugarcane pulp paper of letter size: 8.5 x 11.
75 gsm 3 reams of 500 sheets 1500 sheets total.
Unbleached paper, without optical brighteners, whiteners or dyeing chemicals.
Natural tan color multipurpose copy paper for printers, laser, inkjet, photocopier, crafts and arts.
Environmentally friendly and ultra high efficiency. Zero tree fiber and zero bleaching chemicals.

Check Stock

OMTech 20W Fiber Laser Engraver, LightBurn Compatible Laser Engraving Machine with Red Dot Pointer, 4.3x4.3 Solid State Laser Marking Etching Machine for Metal Aluminum Steel Gold Silver Jewelry More

Laser Power: 50W . Marking Area: 175*175mm .Engraving Depth:≤1mm(0.024in).D80 Rotary Axis.
Pulse Duration: 200ns. Control board : BJ JCZ board(Original).EZCAD2.Compatible with Windows XP/Vista/7/8/10.Stable performance and high reliability..
Imported laser scanning system makes the marking speed up to 7m/s.
High-Rate of Electrical-Optical Conversion: up to 70%..
Free Shipping.ETA:5 days.No Import Duty.2 year warranty.Remote assistance,Customer and Technical Support.English User Manual and Demo Video offered by USB flash disk along with the machine.Returnable for Non-human-induced Malfunction Machine..
Applicable material: Fiber laser marking machine can work on all metals such as aluminum,stainless steel, brass, copper etc. and some of nonmetal such as nylon ,light button, ABS , PVC ,PES etc..

Check Stock